Question about eMachines T6211 PC Desktop

1 Answer

Which pins on the motherboard do you connect the LED display lights on an emachines T6211?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • eMachines Master
  • 3,606 Answers

Hello here is your pc`s homepage:

http://support.gateway.com/us/en/emac/product/default.aspx?modelId=1637

It depends on the mainboard layout, but it probably look like this:


Which pins on the motherboard do you connect the L - 1_3_2013_2_03_32_am.jpg



These to are the most used ones.

The manual does not show any detailed description about the mainboard connections.

Good luck

1_3_2013_2_10_25_am.jpg

Posted on Jan 03, 2013

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 425 Answers

SOURCE: Where is the video card

The Video card is intergrated on the board if it has failed you will have to install a new video card there should be some open slots on the motherboard. Tiger direct is a good place to buy but you pick one up a best buy or office depot.

Posted on Jan 09, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Motherboard diagram Acer eMachine MB DA061/078L


Hello? Tap, tap on the monitor. What are you reading from?

http://www.ebay.com/itm/Acer-MB-NB107-001-DA061-078L-Motherboard-eMachines-08120-2-780G-AM2-Desktop-/280919767281?pt=Motherboards&hash=item41681f78f1

The front of your computer is the Front Panel.
The area of contact pins on the motherboard, that the main wires go to from the Front panel, is the Front panel header.

Motherboard installed in computer, the Front panel header is at the Bottom/Right.
Two rows of 7 pins in a small black rectangular plastic block.

http://www.ebay.com/itm/Acer-DA061-078L-Motherboard-eMachines-EL1200-X1200-AMD-780G-Socket-AM2-DDR2-/140825131784?pt=Motherboards&hash=item20c9d4fb08

TOP row of pins is numbered EVEN.
BOTTOM row of pins is numbered ODD.

Starting on the LEFT side going towards the Right, TOP row:
Pins 2, 4, 6, 8, (NO 10), 12, and 14. Again, there is NO Pin 10.

Starting on the LEFT side going towards the Right, BOTTOM row;
Pins 1, 3, 5, 7, 9, 11, and 13.

A) Pins 1 and 3 are for the HarDDrive activity LED. (Light)
Pin 1 is for the Positive ( + ) wire.
If the HDD LED is dim when the harddrive is active, switch the wires around.

2) Pins 5 and 7 are for a Reset switch, IF a Reset switch is used.

3) Pins 2 and 4 are for the Power On LED (Light)
Pin 2 is for the Positive ( + ) wire.
If the PWR LED is dim when the computer is on, switch the wires around.

4) Pins 6 and 8 are for the Power On switch.

5) The rest of the pins are N/C. Not Connected.

Don't forget to plug the 4-pin ATX +12 Volt power cable in,
(Top left corner),

http://www.playtool.com/pages/psuconnectors/connectors.html#atx12v4

For additional questions please post in a Comment.

Regards,
joecoolvette

Sep 06, 2012 | Computers & Internet

1 Answer

Where is the video card on my emachines t6211?


The Video card is intergrated on the board if it has failed you will have to install a new video card there should be some open slots on the motherboard. Tiger direct is a good place to buy but you pick one up a best buy or office depot.

Jan 09, 2011 | eMachines T6211 PC Desktop

1 Answer

How to hook up the face plate of a emachine w3400 Wich includes 3 wires 1 power butten and 2 led lights


Look at the pinout of the Front Panel header, of the eMachine W3400's motherboard.

The plastic front of the computer is the Front Panel.
The area of pins on the motherboard, that the cables (Wires) from the Front Panel connect to,
is the Front Panel header.

The motherboard for an eMachines W3400 desktop computer is an MSI ms-7145
(Micro Star International)

Orient the motherboard in your view so that we are both looking at it the same way.
Processor to the Top, Ram Memory slots to the Right, white PCI slots (3) to the Bottom.

JFP1 is the Front Panel header.
(Junction Front Panel 1)

JFP1 is on the Bottom Right corner. There are two columns of pins arranged vertically.
(The JFP1 header runs parallel to the Right side of the motherboard)

The Left side column of the JFP1 header is numbered Odd.
Starting at the Top and going Down, the pins are numbered;
1, 3, 5, 7, and 9

The Right side column is numbered Even.
Starting at the Top and going Down, the pins are numbered:
2, 4, 6, and 8.
There is NO Pin 10

A) Pins 1 and 3 are for the HarDDrive Activity LED light. (HDD)
If the LED light is dim will operating switch the wires around

B) Pins 5 and 7 are for the Reset switch. (Reset button)
> IF Used

C) Pin 9 is Not used. (NC. No Connection)

D) Pins 2 and 4 are for the Power On LED light (If dim switch the wires around)

E) Pins 6 and 8 are for the Power On switch. (Power On button)

Trace the wires back to the Power On switch. Even if it means temporarily removing part of the Front Panel to see.

Same with the LED lights.
See which wires go to the Power On LED, and HDD Activity LED. (Harddrive Activity LED)

Follow the 3 wires, and tell me where they go to on the Front Panel.
USB port?
Memory Card Reader?
Firewire port? (a1394)

Nov 27, 2010 | AMD eMachines Desktop System w/ 17'' CRT...

1 Answer

Need wiring connection diagram for Power Switch to Motherboard for EMachine W2925 model. Wires were disconected accidentally while cleaning inside of tower


micha219, the eMachines W2925 desktop computer uses an FIC motherboard.
First International Computer { Inc }
The Model Number of the FIC motherboard is VC37.
FIC VC37.

Disregard the following if you are aware:
The plastic front of your computer is the Front Panel.
The area on the Motherboard that the cables (Wires) from the Front Panel connect to, is the Front Panel header.

Processor to the Top, Ram Memory slots to the Right, the Front panel header is in the Bottom Right corner.

It is a rectangular shape with two columns of pins.
The length goes up, and down on the motherboard.

The pins on the Right side of the Front Panel header are numbered Odd.
The pins on the Left side of the Front Panel header are numbered Even.

There are 4 pins on the Left side.
There are 5 pins on the Right side.

Starting at the Bottom on the Right side going Up;
Pins 1, 3, 5, 7, and 9.

Starting at the Bottom on the Left side going Up;
Pins 2, 4, 6, and 8.

A) Pins 2 and 4 are for the Power On LED light.
(If after connecting the LED light is dim, reverse the wires)

B) Pins 6 and 8 are for the Power On switch. (Power On button)

C) Pins 1 and 3 are for the HarDDrive Activity LED light.

D) Pins 5 and 7 are for the Reset switch. (Reset button. IF used)

Pin 9 is NC. Not connected

Oct 18, 2010 | E-Machines eMachines Desktop PC

1 Answer

Can an eMachines T6212 be upgraded with an Athlon 64 FX60 CPU?


it cannot be done if you want to use the same motherboard

Mar 27, 2010 | eMachines T6211 PC Desktop

2 Answers

Need where pwr sw and pwr led and hdd led plug onto au31 motherboard


Here is a link for the manual for your au31 motherboard. The diagram explaining the front panel headers is on page 12.

http://www.lurkhere.com/~nicefiles/AU31_manual.pdf

Dec 02, 2009 | E-Machines T3092 PC Desktop

1 Answer

Gateway / eMachines 4006149R, D102GGC2 Motherboard


Their should be a 9 pin header at the bottom right corner of the board. Between the sata headers and the corner. There are two rows of pins in the header, one row has 5 and the other 4. The row with 4 pins has the power switch and the power led pins : : : : . They should be color coded red for the switch and green for the power led. From left to right the first pin is for the led (+) lead, the second pin is for the led(-) lead, the third pin and fourth pin are for the power switch. Also there is a 2 pin header above the 9 pin header that is an alternate power led header, the left pin is (+) and the right is (-). I hope this helps you.

Aug 26, 2009 | Intel Computers & Internet

1 Answer

T6410 EMACHINE TRYING TO CONNECT START BUTTON


The motherboard in your computer is an MSI MS-7145, which is also called RS480M. You can download a copy of the manual here. The front panel connections are on page 2-20.

Looking at the header JFP1, pins 1 through 9 (odd numbers) are the front row, pins 2 through 10 are the back. Pin 10 is the missing pin. The power switch connects to pins 6 and 8. The power LED connects to pins 2 and 4. The HDD LED connects to pins 1 and 3. The reset button, if used, connects to pins 5 and 7.

May 13, 2009 | E-Machines eMachines Desktop PC

2 Answers

EMachines Imperial GL VE-20021218 Motherboard Pin Out


Normally on the board there is silk printing to state what connection goes where. Also on the black connector i.e. power LED there is a small arrow that goes to pin 1 of the POWER LED pins.

Hope that was any help thanks J

Jan 20, 2008 | Computers & Internet

2 Answers

Trying to hook the motherboard back in


it varys on each machine , but on the mother board their is a group of pins stickin out one or 2 have jumpers leave them alone! go to the pins left bare their is minenute abreviations next to the pins they will giv you an idea of what 2 do ,also look for colour coding.

Jan 17, 2008 | AMD eMachines Desktop System w/ 17'' CRT...

Not finding what you are looking for?
eMachines T6211  PC Desktop Logo

168 people viewed this question

Ask a Question

Usually answered in minutes!

Top eMachines Computers & Internet Experts

brian soufane

Level 3 Expert

693 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Michael Vincent Cruz

Level 3 Expert

868 Answers

Are you an eMachines Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...