Question about Uniden Bearcat Pro PC68XL 40-Channels Base CB Radio

1 Answer

How to program my uniden bearcat scanner bc350c

I found out how to program them in but how do you listen to them

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 40 Answers

To listen to the programed channels you need to turn the squelch up to to the right and press scan it will scan all the channels and stop on the ones that people are talking on. you can down load the user manual at the bearcat scanner website.

Posted on Mar 10, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to program a uniden bearcat radio scanner


Go to Uniden support and download the manual

Sep 02, 2012 | Uniden BC350C Base Scanner

1 Answer

How do i program frequencies into my uniden bearcat scanner bc350a


The BC350C is a factory pre-programmed scanner, so you cannot program it in the standard manner - entering frequencies via the keyboard. You can, however, transfer a displayed frequency from the SCAN or SEARCH mode into the PRIVATE bank. Details for doing this are in the factory manual that you can download and print, at no cost, here:
http://www.uniden.com/pdf/BC350Com.pdf

For a comprehensive database of active frequencies in your area, and a lot of other useful scanning information, visit:
www.RadioReference.com

Bill B.
Listening in since the 60's

Jan 09, 2011 | Uniden BC350C Base Scanner

1 Answer

I have a Bearcat Scanner (Uniden Bearcat BC145X) how do I set up the chainals


The BC350 is a pre-programmed scanner. You cannot program it in the usual manner (direct keyboard entry of each frequency), but you can transfer displayed frequencies in the SCAN or SEARCH mode to a PRIVATE bank. Detailed instructions for operating your scanner are in the factory manual which you can download and print, at no cost, here:
http://www.uniden.com/pdf/BC350Com.pdf

For a comprehensive database of active frequencies in your area, and a lot of other useful scanning information, visit:
www.RadioReference.com

Bill B.
Listening in since the 60's

Dec 10, 2010 | Uniden BC350C Base Scanner

1 Answer

How can I receive the new digital signal that is sent out by my local police?


Sorry, but there is no APCO-25 (digital) card available for your scanner. Receiving the digital signals will require a digital scanner. Check out the Uniden Bearcat BCD996XT.

Bill B.
Listening in since the 60's

Oct 22, 2010 | Uniden BC350C Base Scanner

1 Answer

How to program


There are several ways to program your scanner, so it's best that you refer to the owner's manual for detailed instructions. You can download/view/print the manual at:

http://uniden.com/pdf/BC350Aom.pdf

Sep 01, 2009 | Uniden BC350C Base Scanner

1 Answer

Bearcat scanner 350a


There are several ways to program your scanner, so the best thing for you to do is review the owner's manual for your scanner. You can view/download/print your scanner manual at:

http://uniden.com/pdf/BC350Aom.pdf

Aug 31, 2009 | Uniden BC350C Base Scanner

2 Answers

How do you program?


I couldn't find the "A" but here's a link to the manual for the BC350C. Hopefully it will help.

http://uniden.com/pdf/BC350Com.pdf

Aug 05, 2009 | Uniden BC350C Base Scanner

1 Answer

Need to know how to put codes in


If your scanner is the BC350C (the section you posted in), here's a link to the owner's manual which will give you detailed programming information:

http://www.uniden.com/pdf/BC350Com.pdf

If you have a different model Bearcat scanner, try:

1. Push MANUAL to stop scanning and advance to the channel that you want to program.

2. Enter the desired frequency, including the decimal point (e.g., 156.015).

3. Press E or ENTER to set the frequency.

4. Repeat the process, starting with 1 above to select the channel.

NOTE: With some Bearcat scanners you may need to press the E or ENTER key before entering your frequency.

These are general steps that work on most recent Bearcat models. If they don't work on yours, try different variations. You can also check Uniden.com -- they may have an online manual that you can download and print.

Apr 25, 2009 | Uniden BC350C Base Scanner

Not finding what you are looking for?
Uniden Bearcat Pro PC68XL 40-Channels Base CB Radio Logo

Related Topics:

1,828 people viewed this question

Ask a Question

Usually answered in minutes!

Top Uniden Radio Communications Experts

Jason

Level 2 Expert

208 Answers

Robert McClure

Level 2 Expert

160 Answers

John
John

Level 2 Expert

509 Answers

Are you an Uniden Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...