Hi, I have a qumi q2 since almost 1 year. I was using it, browsing settings. By mistake, i turned on the password control, and it seems that i entered a key i don't know... So, actually, i can't use my qumi. Do you know how can i do to reset the device ?
Thank you for your answer.
Unplug the power cord from projector
--> HOLD down (keep holding down) the right key on the keypad (top of the projector) and Insert the power cord back to the projector
--> The "Power" and "Ready" LED light should blink TWICE and unplug the cord from the projector (while still holding down the right key)
from facebook site
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Make sure u typed your user name correctly. While entering password make sure your caps key is off.
If you really forgot your password, on the login screen, if only your user name is displaying, press control + alt + delete, u will get a checkbox to enter your user name, here enter administrator for user name and press enter. If administrator account is not assigned with any password, you will be able to login as administrator then u can change password of any user in the system or create new users.
If u like to learn how to use browser efficiently and save time while browsing watch this video, you can learn something useful.
You probably fried your Soundlink by using the wrong adapters. In general, an adapter yields the rated output at the rated current so connecting a 19V, 3A adapter instead of a 19V, 1A adapter applied much higher voltage.
It is most probably overheating. First you need to open up the unit and see if the fan moter is frozen. It is probably because you can't hear it spinning. There are usually two bushings one in the front and one at the rear of the motor. They are usually permentally lubricated but as we know nothing is forever. So, try to take some good quality oil like 3 in 1 and try to drip a drop on either side of the motor where the shaft comes out and then try spinning it by hand. Hopefully that may work but if not then as a last resort try spraying just a very small amount of WD-40 and try spinning it again. If it then does work then use the 3 in 1 again. WD-40 will probably clean the gum out of those bushings but it is not a proper lubricant so that is why you need to use that 3 in one or any good quality lubricant like gun oil.
If all else fails then you probably have a bad fan motor and it will have to be replaced. Just so you know I have had this same problem, usually with air conditioning fan motors and most of the time the lubrication method that I just described worked very well.
Reset component settings.
Usually, the problems you encounter with a projection TV may be resolved
through the resetting to its factory settings. If you experience
inaccuracies in the color, reset the television's PerfectTint/PerfectColor
capabilities. Simply press the Menu tab and then highlight "Perfect Color"
using your right key arrow. After this, press "Enter" and then "Reset" in
order to reset to factory settings. If you have audio / video problems
(VCR or DVD player), simply press "Menu" and highlight the "Reset"
Reset television controls. In case you cannot fix your TV via its
component settings, there are other ways of resetting. Just select "Menu", key
in "1, 2, 3", and then press "Enter." In doing this, the TV's
manufacturer's specifications will all be restored. If your TV's power system
does not function, you should perform a complete system reset. You can do this
by clicking on Reset System button located at the TV's control panel. Your
television will be turned off and then a green light (LED) will quickly flash
for approximately one minute. Once the light has stopped flashing, your TV
should immediately turn on.
hi donna reid!!!well! i suggest u to plz dont make any mistake while u are filling ur forms for creating new accounts...ur password shud be strong at the time of filling a form....and the most iimportant thing before u create any account i suggest u to plz delete ur browsing history, ur cookies etc etc....by going to the top left corner of ur browsing page......click on settings, go to options, then a page will be open in new brwoser, thr u gonna find three options on ur right, click on under the bonnet , then clear browsing data and then delete ur browsing history and cookies from the beginning of time..............thts it.............i hope it will help u a lotttttttttttt.....cheers