Question about Carrera Go!!! Nascar Electric Race Set

Open Question

Carrera race cars won't move--brand new set--weak instructions

Just assembled a carrera go race car set---neither car moves in either direction. the manual is all pictures no vebage, does something need tobe done on cars or do they work out of the box?

Posted by on

1 Suggested Answer

  • 1 Answer

SOURCE: need instructions for the carrera go race track

i am looking as well

Posted on Jan 05, 2010


Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Jammed and needle bar will not move.no thread wrapped anywhere,hand wheel won't raise the bar either


1. Remove the needle and bobbin assemble completely.
2 Try to move the hand wheel - forcefully if necessary.
3. Place one drop of oil on race. That is the little dip that has been circled. The hook (pointed thing) must ride on this smoothly.
4. Try to move the hand wheel again. Back and forth until it will move without resistance.
5. Oil parts that move with metal against metal.
6. Replace the bobbin assembly. Try to rotate the hand wheel again. If it is ok you can replace the needle.
7. Try to rotate again. If it rotates smoothly you shouldn't have any further problems. If the needle strikes something under the throat plate you will need to get the sewing machine timed.
25764446-ezyqsmofnm3xetgozo0tiqgh-3-0.jpg

Jun 28, 2015 | Juki DDL-8700

1 Answer

I put the car on the track and put in my controller but it won't advance


One car on track runs great. When I place second car on its track, it stops. I tried to interchange cars. Both cars work on inner track. Both stop on outer track.

Feb 17, 2014 | Carrera Go!!! Nascar Electric Race Set

2 Answers

How do I wind up my tag carrera automatic using the crown??


Wow, how wrong yall are.

There are three positions for the Carrera's push-down crown. The inner position is used for normal wear and winding. To wind the crown manually, simply rotate it clockwise.

Changing the date on the Carrera is done from the middle crown position. Turn the crown clockwise to advance the date, one day at a time. Push the crown back to the inner position when finished.

The outer crown position is used for setting the time. You can turn the crown in this position either clockwise or counter-clockwise. Adjust the time forward or backwards. Setting the time backwards will not damage the watch. When the time is correct, press the crown all the way into the inner position.

Feb 24, 2011 | Tag Heuer Automatic Chronograph Series...

1 Answer

My one car on one side of the track for 4 track lengths wont run,


it not geting power to that track. check the stip in the track.

Jan 01, 2011 | Carrera Go!!! Nascar Electric Race Set

2 Answers

Can't reassemble shuttle hook and shuttle race


the hook driver (still in machine) is 1/2 moon shape. The hook is also 1/2 moon shape. If you set the machine on its back, it's easier. Set the hook 1/2 into the other 1/2 of the hook driver to make a circle. Then put the hook cover on (machine still on its back) with the tabs for the twist locks pointed out. Needle gaurd to the top of the machine. Snap the twist locks in place and viola!
Kent

Mar 16, 2009 | Baby Lock BL1556

1 Answer

New set. Won't run. No manual in box


just bought carrera go!!! nascar set for my boy's for xmas and seems like hunk of junk cars won't even get around the track one time. Have on flat surface cars seem to be loosing charge. Any help, please?

Dec 25, 2008 | Carrera Go!!! Nascar Electric Race Set

Not finding what you are looking for?
Carrera Go!!! Nascar Electric Race Set Logo

Related Topics:

120 people viewed this question

Ask a Question

Usually answered in minutes!

Top Carrera Toys Experts

kakima

Level 3 Expert

100340 Answers

yadayada
yadayada

Level 3 Expert

66563 Answers

ray gallant

Level 3 Expert

39697 Answers

Are you a Carrera Toy Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...