Motoming Touchscreen problem

Touch Screen Not Working Android Problem [Fix] - TechKhoji

www.techkhoji.com > Android

Feb 27, 2014 - How can I reboot my tablet, the touchscreen is not working. ....Sometimes when I turn on the screen it doesn't respond to my fingers. Then I ...

Android Tablet Touch Screen Problem Solution - YouTube

? 21:36
https://www.youtube.com/watch?v=h7_aqvkfKL4
Jun 16, 2014 - Uploaded by SOLOMON BOTCHWAY
I CANT Believe it, i Actually fixed my tablet.. all i did disconnect the ... my touch is working how to fix the screen not showing? ....2 WAYS TO FIX IPAD TOUCHSCREEN NOT RESPONDING - WORKING - Duration: 5:17.

Samsung galaxy Tab S 10.5 not responding by touch ...

? 2:54
https://www.youtube.com/watch?v=XkK9zCx46gs
Jul 7, 2014 - Uploaded by Linkhunter
i just the new tablet by samsung i recharge the tablet after that isnot responding by touch and so Sim card do ...

Touch Screen Not Responding ' DaniWeb - DaniWeb IT Discussion ...

www.daniweb.com > ... > Hardware > Mobile and Wearables

Two thing can cause this. If your unit is running firmware version 5.3, this version has a bug where the touchscreen will work for about 5 seconds then the unit will lock up. Updating the unit to version to version 5.4 will fix the problem. More info can be found here:

http://www.sharc.net/discus/messages/6/471.html?1337567850

http://www.sharc.net/discus/messages/6/469.html?1333569932

If you are running firmware version 4.9 or 5.4 and the touchscreen still does not respond, then the touchscreen will need to be replaced. On the Nuvi 7xx, the touchscreen may be soldered to the LCD display, so if you don't have any soldering experience, please have a professional replace the touchscreen. More info can be found here:

http://www.sharc.net/gps_LCD_repair.htm

CHECK THE FLEX OF UR TOUCHSCREEN IF ITS BROKEN;IF NOT JUST LIFT THE SOCKET AND PLACE IT AGAIN.

The problem is probably with touchscreen (a thin film on screen)

You can try order a replacement touchscreen on ebay and replace it yourself
Tip: order a couple of them, they are cheap but extremely fragile

To calibrate the touchscreen on a nuvi 300 or 600 series:

1. Power the unit On.
2. From the Where to? / View map screen, touch Settings (wrench icon).
3. Touch Display.
4. Touch Recalibrate.
5. A new screen will display that says Press Dot.
6. Touch the center of the dot.
7. Keep touching the center of the dot as it moves around the screen.
8. When Calibration Complete appears on the screen, please touch OK.

The touchscreen will now be recalibrated.

If your touchscreen is not responding to any touch and preventing you from recalibrating the touchscreen using the instructions above, please follow the steps below:

1. Connect your nuvi to your computer with a compatible USB cable.
2. Open the Garmin Nuvi drive located in MyComputer/Computer. (Note: Mac users can locate the Garmin Nuvi drive icon on the Desktop.)
3. Open the Garmin folder.
4. Locate and delete the GUPDATE.GCD file.1
5. Safely disconnect your nuvi from your computer.
6. Power the nuvi Off.
7. Power the nuvi on by holding the power button.
8. Continue holding the power button down for 1-2 minutes until the screen calibration option displays.
9. Touch the center of the dot as it moves around the screen.
10. When Calibration Complete appears on the screen, please touch OK.

The touchscreen will now be recalibrated and should respond properly.

To calibrate the touchscreen on a nuvi 300 or 600 series:

1. Power the unit On.
2. From the Where to? / View map screen, touch Settings (wrench icon).
3. Touch Display.
4. Touch Recalibrate.
5. A new screen will display that says Press Dot.
6. Touch the center of the dot.
7. Keep touching the center of the dot as it moves around the screen.
8. When Calibration Complete appears on the screen, please touch OK.

The touchscreen will now be recalibrated.

If your touchscreen is not responding to any touch and preventing you from recalibrating the touchscreen using the instructions above, please follow the steps below:

1. Connect your nuvi to your computer with a compatible USB cable.
2. Open the Garmin Nuvi drive located in MyComputer/Computer. (Note: Mac users can locate the Garmin Nuvi drive icon on the Desktop.)
3. Open the Garmin folder.
4. Locate and delete the GUPDATE.GCD file.1
5. Safely disconnect your nuvi from your computer.
6. Power the nuvi Off.
7. Power the nuvi on by holding the power button.
8. Continue holding the power button down for 1-2 minutes until the screen calibration option displays.
9. Touch the center of the dot as it moves around the screen.
10. When Calibration Complete appears on the screen, please touch OK.

The touchscreen will now be recalibrated and should respond properly.

check MENU settings may be touchscreen is off ,else touchscreen loop is broken

There is more than one calibration procedure, but for the 200 it is:
Normal 0 false false false MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} To recalibrate the touchscreen on your nuvi 200 follow the steps below:

1. Have the unit turned OFF and unplugged from power.
2. Slide the power switch to the ON position and hold for about 45 seconds.
3. A message will display on the screen: Press Dot.
4. Once this message displays, release the Power button.
5. Press in the center of the Dot.
6. Keep pressing in the center of the Dot as it moves around the screen.
7. Once this is complete, there will be a message: Calibration Complete.
8. Touch Ok and the unit will restart.

The touchscreen will now be recalibrated.
*Note if unit is running software version 6.00 or newer you will want to follow steps from below.
To recalibrate the touchscreen on your nuvi 205 series follow the steps below:

1. Have the unit turned OFF and unplugged from power.
2. Place your finger in the top left hand corner of the touch screen and apply pressure.
3. Slide the power switch to the ON position.
4. Hold pressure in left corner until the Press dot message appears.
5. Once this message displays, remove your finger from the screen.
6. Press in the center of the Dot.
7. Keep pressing in the center of the Dot as it moves around the screen.
8. Once this is complete, there will be a message: Calibration Complete.
9. Touch Ok and the unit will restart.

The touchscreen will now be recalibrated.

If this doesn't work you have two choices
Buy a new one
Or
Send your in for repair. Go here for this option
http://www8.garmin.com/support/outofwarranty.html

Try to find how to calibrate the touch screen in the users manual.

these phones suck mines 2