When i turn it on it starts to load but windows will not load

You are in the BIOS, which is the computer settings area. If you are unable to have it start up without hitting any keys then you either have a failing hard drive or a corrupt windows.

FN Lock, if (F2) is white your FN Lock is on, if FN is blue or yellow, You need to press FN (Function) key then (F2).

It is probably a setting in the bios, you need to go in to the bios to disable the lock and that should do it.

Make sure the USB setting is enabled in CMOS. That is the PC start up screen that loads before windows. Usually you have to hit DEL, or f2 Key.

hello


start your PC and press or hit the DEL or F2 key to enter into CMOS setting and set your first boot device into DVD or CD. or in the CMOS / BIOS setting just simply LOAD THE OPTIMAL DEFAULTS OR LOAD SETUP DEFAULT and save and Exit.


Than you

Just leave comments

To reset the BIOS please follow the below steps.
1 . Restart your Dell laptop. Click on "Start," "Turn off Computer" and "Restart."
2 . Press "F2" during the boot process to enter the BIOS. Press "F2" before the Windows loading screen. Certain models may use a different key. The key will be displayed during the boot process. For most Dell models, the key is "F2."
3 . Use the "Alt" + "F" key combination to load defaults.
4 . Press "Esc" on your Dell laptop keyboard to save and exit.
5 . Choose the "Enter" key to save all changes and exit the BIOS screen. Allow your laptop to restart for BIOS settings to reset.

Thanks. Have a great day.

Restart your Sony Vaio computer.

Press the "F2" key to enter the BIOS.

Use the arrow keys to highlight the "Load BIOS Defaults" menu option. Select it by pressing "Enter."

Highlight "Load BIOS Defaults" again and hit "Enter." This will reset all of the settings of your Vaio's BIOS back to their original factory defaults. You can now select "Save Changes and Exit" to exit the BIOS.

it's fell asleep,switch it then the minute you've hit the power button start tapping the F2 key unit you get into the bios settings.
in there you will see a set of tabs across the top the last one being "EXIT" useing the arrow keys go to exit
hit ENTER then move down to GET DEFAULT VALUES/SETTINGS or LOAD DEFAULT VALUES/SETTINGS
Which ever & hit ENTER select yes then hit Enter again then move back up to exit saving changes or
save & exit the computer will shut down & reboot.
if not download & check the manual : click here

Hello

Try f2,then let the screen come up.This is your bios settings,dont change anything.

Next hit the esc key,answer yes or y key.Pc should reboot normally.

If this doesnt work hit the f10 key and select your hdd or hard drive in the options,and reboot.

the reason why you didnt receive any back up discs because your computer has a recovery partition. To access it,restart your pc,tap ctrl+f11, select "restore".It will format your hard drive and will load factory imag that has your windows and dell apps..if that didnt work,you can request back up disc here, support.dell.com/xpscd