Question about Dyson DC07 Bagless Upright Cyclonic Vacuum

2 Answers

Clutch Issue How to replace the clutch in the Dyson DC07

Posted by on

  • Anonymous Mar 17, 2009

    Soundslike a ratchet,very load unhealthy noise

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 438 Answers

Greetings from GoVacuum,

The clutch repair is not a simple task, but if you watch the video below closely, you can certainly get through it. You'll need to purchase a clutch system (it's best to stay with the genuine Dyson clutch, the generic clutch made is not as good) if you haven't already. You may purchase the clutch mechanism here; Dyson DC-07 Clutch Assembly for Early Models if you don't currently have one.

Here's a great video that walks you through step by step on how to replace the clutch on your Dyson. If you found this repair solution helpful, please be sure to rate the repair as helpful by clicking the 4 Thumbs Up Icons in the top right hand corner of this Repair.

How to Replace a Clutch on a Dyson DC07 Video Tutorial:

If you have any questions about the repair, I'm always happy to answer your questions. Please send me an email to chris.jones (at) govacuum (dot) com, or just request a clarification through FixYa.

I hope that this helped you,

Chris Jones
GoVacuum.com

Posted on Mar 19, 2010

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to remove clutch on dyson dc07


This service is hard to explain. Try googling it so you watch a video of how it is done. You can purchase belts and rebuild the clutch with the new belts or you can purchase a new clutch with belts already installed

Mar 27, 2014 | Dyson DC07 Animal Bagless Upright Cyclonic...

1 Answer

Brush won't turn on dyson dc07


There was a belt that was to be attached to the motor shaft under the belt cover, be sure that it didn't pop off. the recommended fix is to replace the clutch, not the belts in the clutch. if you only replaced the belts it could still be a bad clutch.

If you need any help feel free to contact me.

Tim
TheVacCenter.com

Feb 16, 2013 | Dyson DC07 Bagless Upright Cyclonic Vacuum

1 Answer

How do i replace the clutch assembly Dyson DC07 Bagless Upright


Hi there,

I have made a youtube video that you can watch at vacuumsmart.info If you find it helpfull please take the time to leave a review for me here or message me on the site.

Also if you need parts for your Dyson DC07 such as filters you can go to www.vacuumspot.com.au or www.nelsonvacuums.com.au

Hope this helps :)

Jun 12, 2010 | Dyson DC07 Bagless Upright Cyclonic Vacuum

1 Answer

How to change brush belt on dco7 dyson


This depends on whether your DC07 has a brush control clutch or not. For excellent illustrated guidance go to www.dysonmedic.com and click on DC07. For belt change on a model without clutch click on "belt and brushroll". It's simple! For models with a clutch, click on "clutch replacement". It's not so simple!

Feb 16, 2010 | Dyson DC07 Animal Bagless Upright Cyclonic...

1 Answer

DC07 Dyson clutch not engaging, thus carlperr beater not turning


As far as I am aware, the clutch mechanism cannot be dismantled, and even if it can, I dont know of anywhere to get individual components.
DC07 clutches are avaible on eBay reasonably cheaply, so best fit a new one.

Feb 15, 2010 | Dyson DC07 Bagless Upright Cyclonic Vacuum

1 Answer

Can the belt in the clutch be replaced or do I have to buy a new clutch and belt assembly?


You don't need to replace the whole clutch, you can replace just the belt. You can get the clutch belt and the brush roll belt combo pack for the DC07 here:

http://www.vacbelts.com/dyson-clutch-system-belt.htm

Oct 26, 2009 | Dyson DC07 Animal Bagless Upright Cyclonic...

1 Answer

Doesn't rotate roller


Yes, There is a belt on the DC07. If you have the DC07 with the clutch system you need this belt:
http://vacbelts.xps.convina.com/dyson-clutch-system-belt.htm
If you have the DC07 without a clutch you need this belt:
http://vacbelts.xps.convina.com/dyson-flat-belt.htm

Oct 13, 2009 | Dyson DC07 Bagless Upright Cyclonic Vacuum

Not finding what you are looking for?
Dyson DC07 Bagless Upright Cyclonic Vacuum Logo

Related Topics:

960 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dyson Vacuums Experts

AskDyson
AskDyson

Level 3 Expert

2572 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Roger Potts

Level 3 Expert

694 Answers

Are you a Dyson Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...