Insert or close tray 2 - HP LaserJet Pro 400 color MFP M475dw - multifunction fax / copier / printer / scanner color

https://www.usa.philips.com/c-f/XC000005643/the-service-door-of-my-philipssaeco-espresso-machine-cannot-be-closed

Quoting:

Troubleshooting The service door of my Philips/Saeco espresso machine cannot be closed There is a simple solution if you cannot close the service door. Please read along how to resolve this.
Place the components in the correct order Follow the steps below to solve the problem:

1. Open the service door
2. Remove the drip tray with the coffee grounds container
3. Close the service door
4. Insert the drip tray with the coffee grounds container

To prevent this from happening Always close the service door first and then insert the drip tray with the coffee grounds container.
OK: Close the service door first and then insert drip tray.
Not OK: Insert the drip tray before you close the service door.The information on this page applies to the following models: HD8924/47 , HD8911/47 , HD8751/47 , HD8765/47 , HD8772/47 , HD8773/47 , HD8775/48 , HD8917/47 , HD8927/47 .
b2c article details page social title

Hyundai DVD-320A / DVD-360A / DVR-510C

1. Method 1:
2. Turn on the player (without a disc inserted)
3. Press 7, 7, 0

1. Method 2:
2. Turn on the player (without a disc inserted)
3. Press 7, 7, PLAY
4. Select region (0 = multi-region)
5. Press SETUP

1. Method 3:
2. Open the disc tray
3. Press 3, 8, 0, 0
4. Select RC (0=codefree)
5. Press SETUP
6. Close the disc tray

If the button on the drive won't pop open the drive, then you need to find out what is causing it to stick closed. Most drives have a tiny hole on the door so you can push a paper clip in it to open the door.

Use the following steps to close the disc tray on an original Xbox 360 console.
Step 1: Remove the disc from the tray Step 2: Make sure the faceplate is on correctly
The faceplate is the plastic piece on the front of your console.

• Press firmly around the edges of your faceplate to snap it into place (make sure it is flush with the rest of the console). If the faceplate is not on correctly, the disc tray won't close.
• If you find that the faceplate is the problem, please contact Xbox Support to order a replacement faceplate.

If this does not resolve your issue, please try step 3. Step 3: Press the eject buttonTry closing the disc tray by pressing the eject button. If the disc tray successfully closes, open the tray and insert a disc. Now try opening and closing the tray with a disc in the tray.
Note Make sure that the disc isn't sticky and doesn't have any labels that could prevent the tray from closing.
If your disc drive still will not close, please try step 4. Step 4: Move the disc drive tray

1. Gently move the tray up and down, and then from side to side.
   
2. Press the eject button on your Xbox 360 console.If your disc drive still will not close, you need to have your console repaired.
3. Step 5: Request a repair If the disc tray still won't close properly, your Xbox 360 console needs to be repaired.

Xbox 360 S consoleUse the following steps to close the disc tray on an Xbox 360 S console. Step 1: Remove disc from the trayIf there is a disc in the disc tray, remove the disc. Step 2: Press the eject buttonTry closing the disc tray by pressing the eject button. If the disc tray closes successfully, open the tray and insert a disc. Now, try opening and closing the tray with a disc in the tray.

Note Make sure that the disc isn't sticky and doesn't have any labels that could prevent the tray from closing.



If the disc tray still will not close, please try step 3. Step 3: Move the disc drive tray

1. Gently move the tray up and down, and then from side to side.
2. Press the eject button on your Xbox S 360 console.

If the disc tray still will not close, you need to have your console repaired. Step 4: Request a repairIf the disc tray will not close, you need to have your console repaired.

check the micro switches on the cd mechanism. these can go wrong sometimes. it's obviously not sending a message to the micro chip that the tray is open therefor it will close again automatically.

hope this helps?

i can help email me printerman007 at hotmail.com

Hi

Thanks for using FixYa. To make it multiregional please follow these step by step instructions using your remote control:

1. Switch power on
2. Open the DVD tray (leave it open with no DVD in it)
3. Press "stop"
4. Press "734466"
5. Use cursor to scroll up or down until it says "Region 0"
6. Press "OK/Enter"
7. Switch power off
8. Switch power on



It show now play all region DVD’s. Please do accept the solution if the issue is resolved or else revert for further assistance.


Thanks
Rylee

there is 2 size cut outs in cd/dvd tray to accomodate cd and mini cd , make sure its seated correctly before u close cd tray.
if you dont have this type drive then u have clip in type which holds cd/dvd secure.

I have the dv9000z. If I do NOT push the DVD drive tray all the way in until it CLICKS shut, then it OPENS again after 1-2 seconds. This is normal. I have found that most times when I close the DVD tray drive, I am not pushing it in far enough, because the top of the DVD tray is rubbing against the laptop's case. If I just press down VERY SLIGHTLY and push the DVD tray in, the tray will fully close and CLICK shut. This works for me. Good luck.

1) Turn on machine
2) Open Tray
3) With tray still open hold the reset until the tray closes.
4) Tap the reset once.
if there is a format disc error, it says "Please insert a Playstation or Playstation 2 format disc." It is accompanied by a sound similar to the browser, but with a more tense noise. This is caused by a disc being so badly scratched that it completely fails to recognise the format, or if there is a problem with the laser. Auto-Diagnosis (PlayStation 2 system) 1. Turn on the system without a disc inside. 2. Once at the Main Menu, press the triangle button to enter the Version Information Screen. 3. Highlight the "Console" option, and then press the triangle button again. 4. Next, press the X button, highlight "On", and then press the X button once more. 5. Now press the circle button twice to return to the Main Menu. 6. Press the eject button on the front of the console, and insert a disc. 7. Now close the disc tray, but DO NOT reset the system. 8. Highlight the Browser option from the Main Menu, and then press the X button. 9. In the Browser, an icon of the disc should appear on the screen. Highlight this icon, and then press the X button to read the disc. 10. If the auto-diagnosis is successful, the disc should load properly at this point.NOTE: The auto-diagnosis feature will return to "Off" the next time a disc is inserted.