Question about D-Link Computers & Internet

1 Answer

D-Link router settings for connecting to a TIVO - wired

I wanted to upgrade my router from DIR-628 to DIR-632 in order to have more LAN connections. I was unable to get my TIVO boxes to connect (wired) - most likely a setting. I tried every setting available and gave up and tried to use my old router but it was "firmware upgraded" and I couldn't get it to work either. :( I need either the setting that will work with TIVO or a suggestion of a router that I won't have so much trouble connecting to TIVO with (wired).

Posted by on

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,878 Answers

It is all about managing the IP's. The router and TiVo should be set to DHCP. This will allow auto IP addressing. It could also be set to static, but this requires more managing on your part.

Posted on Jan 03, 2013

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
Mole72
  • 30 Answers

SOURCE: D-Link DIR 655- losing connection with ntwk is "INVISIBLE"

unfortunatly it is my understandingthat blackberrys require an ssid to connect as they are not as advanced as a laptop or wireless adapter on a pc...sorry

Posted on Dec 13, 2008

beeveez
  • 167 Answers

SOURCE: D-Link DIR-625 Rev C FW308 - Cannot connect via VPN

- Logon to the config page of your router.
- Go to Advanced tab and select Firewall Settings at the left side
- Uncheck all the boxes under the Application Level Gateway and Save settings.

Posted on Mar 14, 2009

kamal1984
  • 1383 Answers

SOURCE: D Link DIR-300 - Connection was Reset - Unable to set up router

press reset button for 10 seconds then all settings are defaults.
you can access your router witrh following link
http://192.168.0.1 or
http://192.168.1.1


Posted on Jul 14, 2009

  • 1566 Answers

SOURCE: lost connection while upgrading firmware. Lost

You have to wait for the upgrade to finish. The router should automatically reboot and the time is depending on the firmware being applied.

Posted on Aug 30, 2009

Geekman
  • 32281 Answers

SOURCE: My laptop has vista and wont connect wireless to

When you configure the D-Link router's wireless settings eg. Infrastructure mode, SSID, encryption etc. then the wireless adapter in the laptop needs to be configured with the D-Link's wireless settings so these devices can communicate with each other.
For details on securing and configuring your wireless network as well as configuring the wireless adapter in the laptop, please click in this link and follow my instructions :-
http://www.fixya.com/support/r3559128-wireless_router_security

Posted on Jan 16, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My Dir 615 router always looses internet connection to my wired computer


Try to upgrade the routers firmware.
http://www.dlink.com/us/en/support/product/dir-615-wireless-n-300-router

Jul 19, 2013 | D-Link Computers & Internet

1 Answer

I have a dlink dir 600 router. i have reset it and still can't connect to the router settings. i have tried 192.168.0.1,192.168.2.1 etc but the best i can get is a 500 internal error or a 404 erro


Press and hold the RESET button at the back of the router with the power ON until the LEDs flash at the time the release the RESET button. (firmware version was 3.00, and upgraded to 3.05) Connect a LAN cable from the D-Link to your laptop/computer's LAN port, open the browser on your laptop/computer and enter the D-Link's configuration URL..
http://192.168.0.1
The default login = admin
The default PW = blank (just press Enter) You can now change the default admin password.
You can now configure the wireless settings. Now configure the wireless card in your computer/laptop with the router's wireless settings. To secure your wireless network from unauthorized access, please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Aug 30, 2012 | D-Link DIR-600 Router

1 Answer

I have a D-LINK DIR-655 in use. It was fully functioning up until yesterday when wireless suddenly stopped broadcasting. The wired connections all are functioning properly , but no laptop or other device...


Try resetting the router back to default settings. Press and hold the reset button for 10 secs. then release. After the reset, try accessing 192.168.0.1 once again and check if you have the complete details on your wireles LAN section.

Sep 03, 2011 | D-Link Xtreme N DIR-655 Wireless Router

1 Answer

We have a DIR-300 on our house.... my brother and i want to play LAN games, but we use laptops(we only connect to the router by wireless... the problem is i don't know how to setup wireless connection or...


You don't have to do any special settings in your router, only settings required in the game for lan connection. But wireless connection is much slower then a wired connection.

Mar 23, 2011 | D-Link DIR-300 Wireless Router

1 Answer

My son has just ought a new l/top , he has cable connection to his existing comp and wants to use the one provider to connect his new laptop as well. using D-Link DIR-600 Router ,how does he do this.


He can connect a LAN cable from another RJ45 port on the router to his laptop provided the router has sufficient LAN ports.
OR
He can connect the laptop using a wireless connection provided the laptop has a wireless card.

To secure your wireless network from unauthorized access,please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Feb 13, 2011 | D-Link DIR-600 Router

1 Answer

Is my D-Link router dying?


Router is not assigning Ip addressed by itself. Try setting it up as an access point. There are a few tutorials online. See if that helps. If you want to use this as a router then try resetting the router. Even see if there is a firmware upgrade for it.

Please rate if helpful.

Thanks

Apr 13, 2010 | D-Link DIR-615 Wireless Router

1 Answer

Suddenly unable to connect wirelessly to dir-655 but still able to be connected via wire connection


Login to the router interface and check the wireless settings,change the Wireless channel to 9 for the 2.4 Ghz and also look for the firmware upgrade.

Mar 15, 2010 | D-Link Xtreme N DIR-655 Wireless Router

1 Answer

Notebook does not connect to LAN or wireless


The dlinks have a tendency to reset to factory settings when you do a firmware upgrade. Connect to the router using a wired connection or using another computer, confirm the settings are what you want, not the defaults. NEVER use the default wireless name (in this case: dlink), always change it to something nobody around you is using!

Jul 25, 2009 | Acer Aspire 3680 Laptop

6 Answers

D-link DIR-635 router


Hi, I am assuming that you can connect to your router's web based interface (192.168.0.1). On a PC LAN wired to the router, open a browser; Type "192.168.0.1"; Log-in username/admin and password/(blank); Go to Tools > Misc and the option to select the WAN speed (bottom); Lock the speed down on the WAN port of your router to 10Mbps (Some versions do not have this feature). Hope this works for you. If not pls post back with your modem brand/model. You may also want to log the IP settings (IP Add, Subnet Mask, Default Gateway, DNS Servers) of the PC that is directly connected to the modem when you can access the Internet when not using the router. Good luck and kind regards.

Oct 02, 2007 | D-Link / RangeBooster N 650 / DIR-635 /...

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18407 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...