Question about Krups Crystal Arome Plus Time 467 Coffee Maker

2 Answers

Krups 467 turns itself off after one hour...

Bought a Krups 467 at thrift shop...after one hour it automatically turns itself off...must be pre-set...I don't want it to go off until I turn it off...how do I stop pot from atuo turning off?
Thanks...

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Sorry
The one hour is minimum setting. Some allowed three hours others four.
If you can't live with that, I'd like to buy it for parts.
EfACTOR

Posted on Jun 13, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 3 Answers

The auto off is configurable as I recall. I don't think you can fully hobble. Coffee kept hot much longer goes bad despite the prolonging powers of the Krups. RTFM online and you should be able to learn the menu command sequence to configure it as you like subject to whatever it allows.

Posted on Feb 22, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hello, My Krups coffee maker keeps flashing the no water signal, even though there is water in it. Consequently it will not turn on. What should I do?


It sounds like the water sensor has gone out, that is probably causing a short that is preventing the pot from tuning on. If the sensor is not bad then it is probably a short in the circuit board itself. You will need to contact krups to have it replaced under warranty. If it's not under warranty then check with a small appliance shop for an estimate, however in most cases it is just cheaper to scrap it and buy a new coffee pot.

Feb 14, 2010 | Krups FME2 Coffee Maker

1 Answer

How to set the auto off??


I had same problem. Could not find manual on-line so I tried different techniques. You can reset the auto-off feature to extend the "On" time up to 3 hours max. You do it by (1) placing the control switch in the "Off" position. (2) Simultaneously push the "Hr" and "Min" buttons. The time display will start flashing the hold time. (3) Push the "Hr" button to cycle through the available hold times, 1 - 2  or 3 hours. When set, turn the selector switch momentarily to any other position to finish the programing.

Apr 25, 2009 | Krups Crystal Arome Plus Time 467 Coffee...

1 Answer

Krups Coffee pot stopped brewing after programming


OH Yeah!
That is the number one failure in these machines. (owned four of them)
The problem is one or both of the "twin" thermal fuses or the thermostat for water
heating and hotplate,( one in the same) has gone open. I have tried for a long time to locate correct replacement parts to no avail. I would STRONGLY not recommend trying to bypass as these are not only controls but a safety feature as well. I was lucky a wile back and found one without a carafe at a garage sale. used it for parts, now those have failed also. Really miss them. If I ever find a source for parts I will post it here with replacement procedure.

EfACTOR


Feb 22, 2009 | Krups Crystal Arome Plus Time 467 Coffee...

1 Answer

Red blinking light on krups coffee maker


It means your water filter needs to be replaced. I wouldn't know this either as I found my coffee maker in a thrift shop, but I read it on Epinions a few minutes ago in a review.

Have you had any problems with splashing when brewing - some of the water missing the spout? I lose up to a cup of water and I'm stumped. The goldtone filter has to be pushed to go down into the unit, does this mean I'm putting it too far in and screwing up the stop n pour or something?

Jan 02, 2009 | Krups Crystal Arome Plus Time 467 Coffee...

2 Answers

Krups model 865 Coffe and Expresso maker manual


I NEED A MANUAL FOR A 865 KRUPS COFFEE AND EXPRESSO MACHINE, I DID NOT GET ONE

Jan 27, 2008 | Krups Coffee Makers & Espresso Machines

1 Answer

Automatically turn off?


Product Description Program your Krups AromaControl Therm Time Coffee Maker the night before and wake up to the wonderful smell of your favorite coffee. With the Flavor Release Technology, this innovative machine allows hot water to saturate coffee grounds longer than traditional coffee makers, providing a more full-bodied, richly-flavored coffee without any bitterness. Hermetically sealed, double-wall, stainless steel insulated carafe with drip-free pour spout keeps your coffee hot for hours. Automatic shut off after 2 hours is a great safety feature.

think you're safe Hope that helps!!!

Jan 22, 2008 | Krups Aroma Control 229 Coffee Maker

1 Answer

Krups model 467


Means it's time to buy a new machine. This one is worn out, and past its expiry date.

Jul 07, 2007 | Kenmore KCP12PRO Coffee Maker

Not finding what you are looking for?
Krups Crystal Arome Plus Time 467 Coffee Maker Logo

262 people viewed this question

Ask a Question

Usually answered in minutes!

Top Krups Coffee Makers & Espresso Machines Experts

Ray Murphy

Level 2 Expert

67 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

yadayada
yadayada

Level 3 Expert

64286 Answers

Are you a Krups Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...