Question about Microsoft Wireless Optical Mouse USB Receiver 1010104281

2 Answers

Wireless Desktop receiver 3.1 cord is broken

I need a new Wireless Desktop Receiver 3.1. PIN:X806623-001 Product ID 77967-545-0603973-00632. Somehow the cord got near something hot and some of the wires (about an inch) are melted.

Posted by on

  • 5 more comments 
  • Anonymous Mar 19, 2009

    my wireless desktop receiver 3.1 plug is broken and i am in need of a new one, can anyone help me out?

    thanks

  • mbreckamp Mar 19, 2009

    the plug for my wireless desktop receiver 3.1 is broken and i am unable to use my keyboard, i am in need of a new receiver, can anyone help me out?

    thank you

  • Anonymous Apr 01, 2009

    Bonjour, je n'arrive pas à installer Microsoft Wireless laser desktop 5000...( receiver n'est pas reconnu...)


    l'installation est terminée


    mais receiver n'est pas reconnu..

    Merci

  • a_roadbiker Apr 19, 2009

    The reciever just stopped working, so now I can't use the wireless keyboard or mouse. Nothing happens when I plug the reciever into the USB port - and I've tried it on several computers. No lights, no USB meassage... nothing. It appears to be dead.

  • karih Apr 20, 2009

    My receiver just quit working first it quit running the mouse about 6 months ago and then last night the keyboard went too!! The darn thing is just over a year old. Does anyone know if you can just buy the receiver??

  • Anonymous Apr 22, 2009

    My microsoft wireless destop receiver doesn't work anymore. it is almost new. is there a way to fix it or get a new one

  • lahilger Apr 29, 2009

    My Wireless Desktop receiver 3.1 is broken. I think the problem is with the USB connection since it sometimes works, and sometimes does not. Is there anywhere you can purchase just the replacement receiver?

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I can sell you a brand new desktop receiver exactly what you had. (receiver only).
if you are interested please email me at: sellingthisandthat@yahoo.com

Posted on Feb 08, 2009

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers

I have a brand new microsoft wireless desktop receiver 3.1.... i am selling it for $20 which includes shipping/insured within the US.
just email me at sellingthisandthat@yahoo.com

Posted on Aug 07, 2009

  • sellingthisa Aug 07, 2009

    i have a brand new microsoft wireless desktop receiver 3.1.... i am
    selling it for $20 which includes shipping/insured within the US.



    just email me at sellingthisandthat@yahoo.com

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to turn on the microsoft wireless keyboard 1.0a


The Microsoft Wireless Optical Desktop 1000 hardware set includes the Microsoft Wireless MultiMedia Keyboard Version 1.1a, Microsoft Standard Wireless Optical Mouse Version 1.0a and the Microsoft Wireless Optical Desktop Receiver version 2.1a.
The receiver connects to your computer through a USB port.
The product installation CD that ships with the hardware set includes the software drivers that are required to install the Microsoft Wireless Optical Desktop hardware on your Windows computer.

Insert the batteries that are included with the hardware set in the keyboard and mouse.
The battery installation latches are located on the bottom of the hardware devices.
Place the product installation CD in your computer's CD drive.
The hardware installation wizard will open automatically.

Plug the receiver into an open USB port on your computer when prompted.
Follow the wizard to synchronize the mouse and keyboard with the receiver.
Close the wizard when it finishes to complete the installation process.

http://www.microsoft.com/hardware/mouseandkeyboard/ProductDetails.aspx?pid=058

Jun 29, 2013 | Computers & Internet

1 Answer

Can someone please tell me which side of the power cord has the larger prong of the polarized plug for Kenwood Electronic Heater #EW6708K


Assuming this involves a USA power system, the larger (usually silver) prong is the "neutral" contact. The smaller (sometimes gold) blade is the "hot" contact. If you are using a 3 wire cord cap, the round or U shaped pin is the "ground". Two wire cord caps should only be used if the equipment (heater) is electrically double insulated. The existing cord will determine which cord cap can be used. It is also important to use the correct ampere rated cord cap.

As for your heater cable, the easiest method is to use an ohm meter to identify the wires. Open a plate or panel on the heater near the cord. The "hot" wire will be connected to a fuse or switch on the heater. Ensure the switch is off or the fuse is pulled (to isolate the wire from other components), then use an ohm meter to test from the "hot" terminal to the other end of the wire (continuity check). The display readout should be very near zero (less than 10 ohms). Repeat the process for the other wire.

Oct 23, 2012 | Dryers

2 Answers

Reconnect my wireless lg w95 receiver to my blue ray after it was unplugged


Wireless speakers connection

LED indicator of wireless receiver
LED Color Operation

Blue - The Wireless Receiver is receiving the signal of the wireless transmitter.

Red - The Wireless Receiver is in standby mode.

Off (No display) - The Wireless Receiver is turned off.


Initial setting an ID of wireless receiver

1. Connect the Wireless Receiver and the rear speaker (right, left) with the speaker cables.
2. Connect the power cord of the Wireless Receiver to the outlet.
3. Turn on the main unit and Wireless Receiver: The main unit and wireless receiver will be automatically connected. "MATE OK" appears in display window. Setting an ID of wireless receiver When the unit is manufactured, the ID is already set. If an interference occurs or you use a new wireless receiver, an ID should be set
again.

1. Turn on the main unit and turn off the wireless receiver.
2. Press and hold x (STOP) on the front of unit and MUTE on the remote control. "REMATE" appears in display window.
3. Turn on the Wireless Receiver. A new ID is set.

Nov 23, 2011 | Televison & Video

2 Answers

Where can i buy a new power cord


HI,

YOU CAN BUY A POWER CORD IN ANY ELECTONIC SHOP OR IN COMPUTER SHOP,
BUT REMEMBER TO TAKE GOOD VOLTAGE CORD IE,15A 110V/250V 3 PIN OR 2 PIN IN 5 AMPS.COST WILL BE AROUND $ 3 TO 4.

TNKS

RABBANEES

Nov 04, 2009 | Lexmark P315 InkJet Photo Printer

1 Answer

Problem


Try two things. 1. if you have a wireless phone near the computer, try to move it at least 6 feet from the computer, these have been known to interfere with wireless mice and keyboards. 2. Make sure that your battery in the mouse is new.

Sep 06, 2009 | Logitech Cordless Mouse

1 Answer

Linksys Wireless-G "Error: Hardware I.D. Missing"


Make a Product Registartoin at Linkys and you will get all the help you need, you can even get a new cd with driver for a smal amunt.

http://www.linksys.com/servlet/Satellite?c=L_CASupport_C1&childpagename=US%2FLayout&cid=1166859677851&pagename=Linksys%2FCommon%2FVisitorWrapper&lid=7785163308L24


Coockies would be nice yes thank you! *lol*

Good luck M8!

Dec 10, 2008 | Linksys Wireless-G WRTP54G Router

1 Answer

I currently have a wireless home network and have purchased a new desktop computer. What is the easiest way to connect the desktop to the wireless home network?


Many wireless routers also come with wired connections. If you can locate your new desktop near the wireless router you can connect to the router using a patch cable (similar to a large phone cord). However, if you do not want to do this, you will need a wireless adapter for your new computer. The adapter should be the same brand as the router to ensure compatibility.

Apr 12, 2008 | Computers & Internet

2 Answers

Keyboard map for Microsoft Wireless Optical Desktop Pro


when i go into keyboard properties there is no 'key settings' option

Jan 16, 2008 | Microsoft Wireless Optical Desktop Pro...

Not finding what you are looking for?
Microsoft Wireless Optical Mouse USB Receiver 1010104281 Logo

Related Topics:

2,051 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microsoft Computers & Internet Experts

micky dee

Level 3 Expert

2644 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Microsoft Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...