Question about Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Whirlpool front loading washer and dryer F28 keeps coming up

We just bought a brand new Whirlpool washer and dryer front loading set. We can not get the washer to work,, we keep getting the code F28 and it won;t let us go any further. What can we do and what does this code mean?

Posted by on

  • allsevenreed Jan 23, 2009

    Same error for me...F28 Seems to wash,spin and then nothing.

  • Anonymous Mar 16, 2009

    brand new whirlpool 9500 out of box getting f28, this is second one after sending first one back

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

F28 is a serial bus error from the CCU (Central Control Unit) to the MCU (Motor Control Unit).

All you need is some Electronics contact cleaner spray and a 1/4 inch socket to remove the top of the machine and the back of the machine.
The CCU is the computer looking box at the top front right hand corner.
Find connector M13, (has red marking on it and only 3 wires) disconnect it by pushing the retainer tab back and pulling gently on the connector.
Spray the contacts of the connector and computer with connector cleaner.
Then re-assemble connector.
The MCU is in the back lower left corner.
Find the connector with 3 wires and red mark, and remove this connector in the same way you did the other, spray it and re-install.
Put the back and top back on.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question!!!!

Posted on Sep 28, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I reset f28 error of whirpool washer


go to www.appliancerepair.com

enter your machine model and search the site for answers. It's one of the finest websites for washer/dryer on the internet~! Good luck.

Feb 12, 2015 | Whirlpool WFW9200S Front Load Washer

1 Answer

It starts and then stops and then F28 flashes


http://www.ukwhitegoods.co.uk/help/fault-codes/laundry-fault-codes/3708-whirlpool-washing-machine-fault-codes.html

Not good! Probably motor control board or motor or wiring harness from control board to motor.

This leads to a Kenmore Video
Whirlpool, Maytag, Kenmore. Same machine different name different trim.

Whirlpool Duet f28 YouTube

Sep 21, 2014 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Whirlpool duet steam front loading


go to this link ........... it will show you step by step solution
http://www.ehow.com/how_8052747_fix-f28-code-whirlpool-duet.html

May 06, 2013 | Washing Machines

1 Answer

Washing stops in cycle with an F28 code.


Hi

This code indicates an electronics communication problem with the washer.Please check this link to get a detailed idea related to the lists of codes and the resolutions to them:-

http://whirlpool.custhelp.com/app/answers/detail/a_id/2885/~/display-shows-an-error-code---front-load-washer

The error code F28 means one or both of these parts are bad.
Motor Control Unit ,Microcomputer Machine Control Unit .
It would be a good idea to order both, as both components have been problematic for error code F28.

Please get back to us if you have further query or else please accept the solution.

Thanks for contacting fixya.com


Sep 02, 2011 | Whirlpool Washing Machines

1 Answer

I have a whirlpool washer & dryer Duet and my washer keeps getting an error code F21 and recently got F28. I had some work done in the laundry area which caused the washer to be moved and then put...


https://www.whirlpool.com/webapp/wcs/stores/servlet/OCManualsLiteratureSearchView?catalogId=10561&langId=-1&storeId=10211&krypto=5QgxQhneFliXuEuX564wSQ%3D%3D&ddkey=http:AjaxMiniWishListView

Above find a link to your Manual and below find a link to a Video which can assist you in fixing the F21 Error Code

The F28 Error Code could Just be a Fluke But it is supposed to mean that there is no water entering so to be sure before running another load be sure hoses are connected and turned on.

Thumbs up if Helpful and Feedback is Appreciated!!!

Jun 17, 2011 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

F28 code washer stops working. Reset will only


Error code F28 indicates that one of the below part is bad
  • Motor Control Unit (8540135)
  • Microcomputer Machine Control Unit (8540788)

If you find either the MCU or the CCU(Microcomputer Machine Control Unit) you can fix it,

Here's the online repair manual for Whirlpool Duet Sport, but its identical to your HE2.

Refer page# 4-20 it describes how to get to MCU.

https://secured.whirlpool.com/Service/SrvTechAdm.nsf/2cd44500d572193285256a45004fd9d6/6545d78b3f479480852571650061b1ba/$FILE/8178558.pdf

May 04, 2010 | Kenmore HE2 Plus Front Load Washer

1 Answer

What id a F28 code on a whirlpool duet washer


Can be the machine control or the motor control here is a link to the Repair manual....    

https://secured.whirlpool.com/Service/SrvTechAdm.nsf/2cd44500d572193285256a45004fd9d6/6545d78b3f479480852571650061b1ba/$FILE/8178558.pdf

Sep 13, 2009 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Whirlpool front loading washer and dryer F28 keeps coming up


F28 is a serial bus error from the CCU (Central Control Unit) to the MCU (Motor Control Unit).

All you need is some Electronics contact cleaner spray and a 1/4 inch socket to remove the top of the machine and the back of the machine.
The CCU is the computer looking box at the top front right hand corner.
Find connector M13, (has red marking on it and only 3 wires) disconnect it by pushing the retainer tab back and pulling gently on the connector.
Spray the contacts of the connector and computer with connector cleaner.
Then re-assemble connector.
The MCU is in the back lower left corner.
Find the connector with 3 wires and red mark, and remove this connector in the same way you did the other, spray it and re-install.
Put the back and top back on.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question####

Mar 17, 2009 | Whirlpool Duet GHW9150P Front Load Washer

Not finding what you are looking for?
Whirlpool Duet GHW9150P Front Load Washer Logo

627 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Sal De

Level 3 Expert

2694 Answers

yadayada
yadayada

Level 3 Expert

78267 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...