Question about Hoover F5810 SteamVac Upright Vacuum

2 Answers

I want to reconnect a hose to my dysons upright

My hose as torn on my dysons hoover model dco7 so i pulled it off, im wondering is there anyway of reconnecting it back or if i can buy a new hose from it where

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 37 Answers

You can find replacement hoses on eBay for the price of $20 to $30. Search for "DC07 hose". That, obviously is the easiest route. But, you can repair the old hose if the damage is near one end or the other of the hose. Damage in the middle of the hose will not leave enough length for effective use and thus buying a new hose makes since.

If you decide to repair the hose, you will need to use wire cutters to snip the wire in the hose below a point where the damage is and then use scissors or an exacto knife to trim away excess plasitic hose above the snip.

Remove the damaged hose section from the fitting that was cut off. You may need to use pliars to pull on the wire until it comes out. Check the inside of the fitting and remove any remaining debris so you have all of the grooves as clean as possible. The inside of the fitting is threaded like a nut and "screws" onto the hose. You will need some form of adhesive to help keep the hose attached to the fitting. I use silicone caulk for that purpose. Squeeze some into the threads on the fitting, screw the hose on and allow to dry over night.

Hope this helps.

Posted on Sep 23, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 197 Answers

New hose time - try Dyson website for buying a new one
http://www.dyson.co.uk/store/parts.asp

Posted on Sep 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dyson dc04 serves manual


Hi there,

For information on using and maintaining your DC04, please refer to our Support page for this machine - just select the model you own from the list:

http://support.dyson.co.uk/Support/Uprights.aspx

I hope this helps - if you'd like any further assistance or advice, please call us free on 0800 298 0298. Our Helpline is available from 7am until 10pm, 7 days a week.

Best wishes,

Jack
Dyson Online Customer Support
http://www.dyson.com

Feb 14, 2012 | Dyson DCO7 Upright Vacuum

1 Answer

My Dyson DC07 vacuum works on the floors, but when I pull out the extension wand the coiled hose attached to the wand collapses and no suction goes through the hose?


Hi there, it sounds like you have a blockage in the hose. I have made a video to show you how to get the hose off and linked it to this answer. It is possible to split the hose in places trying to get the blockage out so try not to be rough. If you do damage the hose you will need to buy a new DC07 hose it is a waste of time trying to repair. If this was a helpful answer please take a moment to rate it or leave a testimonial.

Feb 20, 2011 | Dyson DCO7 Animal Bagless Upright Cyclonic...

1 Answer

It cuts out when I've been hoovering now it will not switch on


it could be over heating but i think there maybe a cut or a pull in the power cable you will have to check it out

Aug 02, 2010 | Dyson DC07 Animal Bagless Upright Cyclonic...

1 Answer

Theres a burning smell of rubber and a flapping sound inside the hoover


Sounds like some object stuck in brush roller, causing belt to Burn, check / clear should cure....

Nov 19, 2009 | Dyson DCO7 Animal Bagless Upright Cyclonic...

1 Answer

Trying to fit a new brush on dyson dco7


you can order the originals from the warranty station here Dyson Repairs

Sep 14, 2009 | Dyson DCO7 Animal Bagless Upright Cyclonic...

1 Answer

DCo7 too much suction hard to push


This suggests that the bristles on your brush roller are worn out.  When the bristles are a good working length, rotation of the roller actually helps to pull the machine over the carpet. When the bristles wear down this effect is lost.

May 20, 2009 | Dyson DC07 All Floors Bagless Upright...

3 Answers

Dyson Brush Bar Always Spins


Take off the brush cover and check that the suction orifice is clear. Also check the rubber flaps at the bottom of the hose/handle holder is correctly positioned.

Feb 06, 2008 | Dyson DC07 Bagless Upright Cyclonic Vacuum

Not finding what you are looking for?
Hoover F5810 SteamVac   Upright Vacuum Logo

126 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hoover Vacuums Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Roger Potts

Level 3 Expert

694 Answers

Ryan S
Ryan S

Level 2 Expert

328 Answers

Are you a Hoover Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...