Question about Washing Machines

Open Question

Calibrate whirlpool 6-th sense - Washing Machines

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 6277 Answers

SOURCE: i am getting LE error

Hi from retired Englishman in SW France,

I suspect that 'LE' stands for Lock Error. There is likely to be a problem with either the door solenoid/lock or the 'door closed' sensor requiring a service engineer's attention I suggest. Sorry ;-0(

If this has assisted and/or clarified the situation for you please consider a 4 thumbs up on our rating.
Thanks and good luck!
John C

Posted on Aug 01, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I put my 6th sense dryer on for 60 & when i turn it on it says 6 hrs.also can i buy a manual for it please


Can't help you with your first problem, but if you had just Googled Whirlpool 6th Sense Dryer you have found a wealth of information including a free manual. Check here:

http://www.whirlpool.com/-[WEL98HEBU]-1021441/WEL98HEBU/

Jul 10, 2016 | Dryers

1 Answer

How to replace the tps on a 1991 tracker? the one i bought has 4 wires the one on the tracker has 6 wires


the 1991 G16a has a pig tail connector, must have 4 wires.
and shares the Injector connector (tricky pin pulls, and all)
that connector you gander is the injector /TPS connector
it has 6 pins but only 4 are for TPS. (yellow /.red are injector)
see page 3 below, for what all this means. last link below.


try to keep in mind, your car has a VIN engine code U (not 6) code 6 , has no pig tail, TPS.
GM uses U code to say, engine is 8valves, TBI, G16a , my guess, (no photos) is your bought TPS is
with tails, and is correct for your 8v engine.

Install, (need feeler gauges to do it)
it's not just thrown on to the car, it must be calibrated.
or the idle switch WILL fail.(and more)
one maker of this TPS is here: (hard to find)
SMP makes one. sMP #TH-147 is for 8V tbi.

http://www.fixkick.com/buy-parts.html#TPS
do not use 16valve parts on your car.

here is the calibration steps.
http://www.fixkick.com/sensors/tests/TPS-testing.html#8v_FSM_cal

the factory page is here
http://www.fixkick.com/TPS/TPS-p91.JPG

http://www.fixkick.com/TPS/TPS-p92.jpg

and page 3 here
http://www.fixkick.com/TPS/TPS-p93.JPG

the last page shows the tricky pin pulls....


you must pull the old pins.' one by one.
then put in then new TPS pins , in the same places of old
matching COLORS.
then do the calibration steps above, using feeler gauges.
same basic steps, from 1989 to 1998.
in 1999 they calibrate it to 0.5vdc, only.
later years, it auto-calibrates.
if the new TPS fails to cure the problem
post the symptoms, and win.

Jun 17, 2016 | 1991 Geo Tracker

1 Answer

The display stopped showing temps and displayed a "6". The actual temperatures dropped to freezing. I unplugged the unit a few times for up to 2 days but the same issue developed.


Whirlpool Refrigerator Error Code: Flashing 6 on the fridge display
Condition: The 6th Sense technology is activated - If you put warm food in the refrigerator or leave the door open, the 6th Sense technology kicks on to return the refrigerator to the set temperature. The flashing 6 should go away once it gets back to the right temperature.
Part or Parts: Allow fridge to get back to temp on its own (no parts required)
Whirlpool Refrigerator Error Code: 6 on the fridge display
Condition: Computer error
Check: Remove power for 5 minutes
Part or Parts: If code returns replace mother board

Apr 29, 2016 | Avanti Refrigerators

2 Answers

WHAT DOES SENSING MEAN?


may mean u have a moister sensor issue

Feb 20, 2015 | Whirlpool Dryers

1 Answer

Whirlpool 6 Sense


I don't have the answer you are looking for but I will tell you I bought a set of Whirlpool Washer & Dryer 9 yrs ago and they were a nightmare. After replacing the boards in both my dryer once and washing machine 2-3 times, I packed them up and got rid of them. If you will start to look you will see all kinds of lawsuits against Whirlpool. Can't believe they are still in business.

Feb 19, 2015 | Whirlpool Cabrio High Efficiency Electric...

1 Answer

HI, WE'VE GOT A WHIRLPOOL 6TH SENSE WASHING


washers are very expensive to fix they cost more to fix then to buy

Aug 09, 2013 | Whirlpool Washing Machines

1 Answer

I am getting LE error in my whirlpool 6 th sense washing machine ...


Hi from retired Englishman in SW France,

I suspect that 'LE' stands for Lock Error. There is likely to be a problem with either the door solenoid/lock or the 'door closed' sensor requiring a service engineer's attention I suggest. Sorry ;-0(

If this has assisted and/or clarified the situation for you please consider a 4 thumbs up on our rating.
Thanks and good luck!
John C

Aug 01, 2011 | Washing Machines

1 Answer

My whirpool 6th sense american fridge freezer has stoped making ice? The water is still live, th eonly problem appears to be the level control arm which is in the up position and want move?


Be very careful, when the ice maker malfunctions, many things can be the culprit. The start device on some models of refridgerator for maytag and whirlpool have been recalled. If your appliance was manufactured in the last 5-10 years you may be having an issue with this component. Mine recently caught on fire at this device that is located near the compressor. If you would like to be a part of the petition for a recall on this appliance contact me at jboooor@hotmail.com

Jun 09, 2010 | Whirlpool 25.6 cu. ft. Side-by-Side...

1 Answer

F 12 whirlpool 6 th sense washing machine.


hello,

simple ,The "F 12" error code is an indication of a water temperature sensor error. There is a chance that there is a loose wire connection on the water temperature

what you need to do to fix up your washer is to check on the wiring connection from the power supply to the water temperature indicator.

thank you and thanks for using fixya.

Jun 01, 2010 | Whirlpool AWM8143 Front Load Washer

2 Answers

There is a flashing #6 in a circle above the temperature indicator. What does this mean?


Mine did the same thing today and I just got off the phone with Whirlpool and they said it just means that the 6th Sense technology is activated. If you put a bunch of warm food in the refrigerator or leave the door open for a while, the 6th Sense technology kicks on to return the refrigerator to the set temperature. The flashing 6 should go away once it gets back to the right temperature.

Nov 21, 2009 | Whirlpool Gold GS6SHEXNQ 25.6 Cu. Ft....

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

yadayada
yadayada

Level 3 Expert

74896 Answers

Brad Brown

Level 3 Expert

15441 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...