Question about Samsung HLN617W 61" Rear Projection HDTV

Open Question

My Samsung DLP hlp4663wx/xaa TV has scrambled picture

The picture has just suddenly scrambled on my Samsung DLP hlp4663wx/xaa TV. I turned it off for a while, even unplugged it, but the problem persists. I removed the cover to the lamp just to look. When I put the cover back on and turned it on again, the picture came back for about 15 seconds then went to scrambled again. Is this an easy fix?

Thanks!
Bob

Posted by on

5 Suggested Answers

  • 208 Answers

SOURCE: samsung hlp4663wx/xaa (after replacing the color wheel)shadowing

If the color wheel you replaced was the BP96-00674A, it would have come with the proper cca adjustments for that particular wheel. You must enter the service menu and reset the cca's for proper color.

Posted on Feb 21, 2008

SOURCE: samsung,model-HLP4663WX/XAA , bought in jan.

Had same problem. Bought replacement lamp. Worked for 6 weeks now I'm looking at replacing the ballast. TV turns of after 5 minutes.

Posted on Aug 24, 2008

  • 41 Answers

SOURCE: Cooling fan motor is making loud humming noise

You will have to pull out the light engine. That will consist of 4 or more screws and disconnecting some plugs. The the whole unit slides out where you can get to the fan housing.

Unless you're mechanically inclined, you should not try it as you could damage the assembly.

I don't know the part number off hand and some of those have newer part numbers as replacement for the original. Just do a google search to come up with a part number.

Posted on May 18, 2009

  • 195 Answers

SOURCE: Samsung HLP4663WX/XAA picture went out, started

Sounds likea bad color wheel to me, or possibly a lamp has blown. If the noise is a humming sound--it is the CW--if you hear a "sound like a sizzle, for a few seconds and then normal, and this repeats a few times--the lamp has blown.

Posted on Oct 12, 2009

  • 8457 Answers

SOURCE: Samsung TV: lamp out

Yes,tries websites like Tvrepairworld.com,Partstore.com,Ebay.com to buy a projection lamp for the replacement.Tv have "LAMP"indication LED light is flashing or staying on.If the projection lamp on the tv now,been in used 4 or 5 hours a day watching the tv.The projection lamp has not been replace the last 1 1/2 or 2 years on the tv.The projection lamp life is over,require changing.The tv also making clicking noises,the Ballast board also dead,require changing too.The Ballast board help to ignite the projection lamp.

Posted on Aug 02, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

TV lamp has been replaced, still won't come on, no picture. When turned on, I can see a blue, kind of sparking light and noise starts and does this about three times. TV powers down and does this again....


Samsung DLP TV Repair - No Picture - Replacing ...

? 2:41
https://www.youtube.com/watch?v=pBTgk_C5FVU
Jun 11, 2012 - Uploaded by ShopJimmy.com
DLP TV Repair No Picture Bad Lamp Bad Bulb TV Won't Turn On DIY Samsung DLP TV Repair How to replace Faulty LampTutorial Click Here to ... Rating is available when the video has been rented. ... is a replacement for the following DLP Rear Projection TV models: ... SAMSUNG HLR6167WX/XAA

Samsung DLP problems - Help! - ecoustics.com

www.ecoustics.com > ... > Home Video Forum > Projection TV Forum
Oct 26, 2009 - I have attached a picture of to show where the "Light Tunnel" is located. Upload ... So now I have a Samsung HLN5065W/XAA that I am willing to part out or sell as is. ... I replaced the ballast but the TV still won't turn on. .... The lamp has been sitting on a shelf until two weeks ago, when the TV went dark. Samsung DLP Light Ballast
Apr 10, 2009
Archive through October 26, 2009 - Samsung DLP problems ...
Apr 8, 2009
Samsung DLP Flashing Standby light
Jul 1, 2006
More results from www.ecoustics.com

Jan 19, 2016 | Samsung SELECT HLR6167WX/XAA Rear...

1 Answer

I have a Samsung DLP model HLP4663wx/xaa and the video keeps cutting out


and any sort of fan like or high pitched sound coming from the set?

Jun 07, 2012 | Samsung Televison & Video

1 Answer

I have a Samsung Model HLP4663WX/XAA Tv Picture great, but it keeps turning off. I turn it back on and it will only stay on for a min then turns back off HELP!


Hello ma'am, hi, looks like the tv has problems with the power supply board, parts inside get to fail slowly, those are likely resistors, and capacitors, and active parts like transistor gets to go leaking, eventually they will be permanently to fail. so have it checked by a tech guy.

Jun 22, 2010 | Samsung HLP4663W 46" Rear Projection HDTV

1 Answer

Samsung HLP4663WX/XAA picture went out, started making strange noise, all lights on power button came on.


Sounds likea bad color wheel to me, or possibly a lamp has blown. If the noise is a humming sound--it is the CW--if you hear a "sound like a sizzle, for a few seconds and then normal, and this repeats a few times--the lamp has blown.

Oct 12, 2009 | Samsung DLP HL-P4663W 46" Rear Projection...

2 Answers

I have white dots on the screen of my hsl4266wx/xaa?


If these dots are only seen when the picture is on I would look for the Optical Block to be causing it. Are the dots in the same place each time you turn it on?

Jul 17, 2009 | Samsung HLS4266 TV

2 Answers

When i turn the tv on ,sometimes i hear a high pitched fan noise.


Hi, bearings in color wheel are about to fail, get it fixed now before the wheel shatters the prisms all over the inside of the tv which of course will then cost you more to fix, video-tek

Jul 01, 2009 | Samsung DLP HL-P4663W 46" Rear Projection...

1 Answer

Samsung dlp mod# hlp4663wx/xaa 2004, When power is turned on the indicator lights for "lamp" and "timer" come on but, no picture? Then the tv will power off, then on and repeat the...


I don't have the manual handy at the moment. but if you look in the owner's manual you should see that this is the code for either a lamp or fan problem. I will look it up myself later, but check the manual. This could be as simple as replacing the lamp.

Dan

Sep 23, 2008 | Televison & Video

1 Answer

Blinking lights


Sounds like the color wheel. Check samsungparts.com for a replacement. Check the video on youtube of a guy fixing his color wheel to see if its something you want to tackle. I changed mine... a drag, but not too awful. Ran about $100.

Sep 01, 2008 | Samsung HLP4663W 46" Rear Projection HDTV

3 Answers

Samsung HLP4663W Color Wheel


 The color wheel that goes in an HLP4663WX/XAA is:

  BP96-00674A

 

 This is the correct color wheel.

Oct 20, 2007 | Samsung HLP4663W 46" Rear Projection HDTV

Not finding what you are looking for?
Samsung HLN617W 61" Rear Projection HDTV Logo

Related Topics:

148 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69955 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

cce772000

Level 1 Expert

7 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...