Question about Microsoft Windows Vista Ultimate Edition

1 Answer

Hello I need a driver for Quickcam 5.4.1 (I have only the old version on CD for Win.95,98,2000) compatible with Windows Vista Thanks Rudolf

Posted by on

  • 2 more comments 
  • ruko322 Jan 18, 2009

    Dear Deboo

    I downloaded the software QuickCamPro5000 (title: QuickCam v.11.5 -

    unfortunately the camera does not work. Over QuickCapture I cannot announce it..
    Best regards

  • ruko322 Jan 19, 2009

    Sorry, the webcam does not work.

    - I must contact directly the service.



  • ruko322 Jan 22, 2009


    I asked the logitech service (in Poland) and they adviced to download an older driver version:


    Now I have on desktop the QC button but my webcam QuickCam5000 do not work. The Wind.Vista (32-bit) system asks for a driver.

    Should I download again any older webcam driver - what version?


  • ruko322 Jan 27, 2009


    I talked to Logitech and loaded newest software:

    and instructions to configuration (msconf).

    (This webcam QC5000 work under Linux).

    Unfortunately Vista cannot find the equipment.

    Regards, Rudolf


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 77 Answers

Download the latest quickcam drivers from logitech:

The latest version 11+ supports vista fine.

That should solve your problem.


Posted on Jan 18, 2009

  • Deboo Geek Jan 19, 2009

    There are versions above 11.5 avalable too.

    First try to update your logitech quickcam software using Logitech Updater (LU) . That should be able to resolve your problem since the 11.5 version has this problem.

    If the problem is still unresolved, contact Logitech support directly:


  • Deboo Geek Jan 23, 2009

    Again talk to Logitech.


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I can't instal my scanner a plat USB 2.0 MD 90091.I work with Win 7. I need your help for installation. Thanks

Hi Rudolf ,
This product doesn't fit with Windows 7 . Try installing a virtual version of XP on your system :
Best regards ,
fanaudi .

Sep 13, 2011 | Operating Systems

1 Answer

Hello ..i have my motherboard drivers compatible only for windowsxp which makes them unusable with linux and windows 7..would u please suggest the way to solve my problem...

Hello there,

Drivers are designed to work for a specific operating system. Sometimes drivers for Windows Vista works well with Windows 7, simply because Win 7's predecessor Win Vista. Linux drivers will not work with Microsoft drivers so as MAC.

Your problem can be solved if you post your motherboard brand, model and version.

Hopefully this helps.
Thank yuo for posting.
have a nice day.

Jul 09, 2011 | Operating Systems

3 Answers

Pls. provide me link for panasonic kx-mb772 drivers for win 7

Hello, a windows 7 driver doesn't exist, sorry. The good news is, you should be able to run it in compatibility mode. Instructions can be found here:

May 10, 2011 | Operating Systems

1 Answer

I have a quickcam v11.1 with driver windows xp , windows vista from logitech! I want to download a driver for the same quickcam v11.1 for windows7


Its possible that your cam's software/drivers is not supported on windows 7.

First uninstall the installed driver. After uninstalling, right-click on the setup of driver and click on- "Properties". The dialog box will open on which you have to click on "Compatibility" tab.

On that tab, check on the box- "Run this program on compatibility mode for-" and select "Vista" from the drop down box.

This will surely fix your problem.

Please vote this answer if helpful.

Apr 19, 2011 | Operating Systems

2 Answers

I have Vista OS on my laptop & have never been able to get automatic updates to work. I have had nothing but problems with this OS & want to instal Win 7 but I am told I can't do that until I see...

Don't worry about "compatibility" issues. You can pretty much force Win 7 onto just about any laptop.

What you need to do is backup your files (that is if you have any you want saved)

You need to do a CLEAN install, not the UPGRADE when you boot from the Windows 7 cd.

Delete ALL of the partitions...then hit NEXT.

When it's done installing, run the updates and if you're missing any drivers after the updates post back the model of your laptop / desktop and we'll help you patch the missing ones.

Best of luck!

Jan 02, 2011 | Microsoft Operating Systems

2 Answers

I am trying to load my daughters digital arts and craft studio to windows 7 and it keeps prompting that it can't pick up the device. How do i install it to windows 7 because it was working perfectly with...

1.your software may not be compatible with the Windows 7 and will have to be run in the compatibility mode for Windows Vista.
Check the compatibility mode for the Vista to install your "craft studio"cd it may not be compatible with Vista and can only run in XP mode or Windows 98.

here is the instruction from Microsoft to use the compatibility mode in Windows Vista:

Aug 10, 2010 | Operating Systems

5 Answers

I'm trying to upgrade from 64-bit Vista to 64 bit Windows 7. When I run the installation disk, I'm getting the following error message, which appears to be contradictory in my opinion:...

I have seen this type of problem before, the only real way around it is to install a fresh copy of windows 7 not to upgrade, you will receive a message that asks you if you want to keep the previous windows in a folder called old windows, from there you will be able to access all your old files and programs, be aware though some programs may not work on windows 7, and you may need to have updated drivers for the systems peripherals. So when you run the windows 7 disk choose clean install and go from there. i hope this helps

Feb 04, 2010 | Microsoft Operating Systems

2 Answers

I have installed vista edition in motherboard D101GGC BUT SOUND IS NOT coming what to do

hello friends...

The problem is due to that you are not installed sound driver in your computer.. you just need to install sound driver that are given by your motherboard CD ... If you dont have then you can download from internet...


May 13, 2009 | Microsoft Windows Vista Ultimate Edition

1 Answer

Win Vista ult does not support driver for Sony digita video camer

Vista Ultimate is supported per website, but only for the memory stick.

  • The drivers needed to connect most Sony® cameras and camcorders to a computer are already included in the Windows Vista and Windows XP operating systems. With these drivers, you should be able to connect and transfer files to a computer.
    Note: If the your camera or camcorder is not recognized by the computer when connected, you may need an updated driver.
  • Detailed Windows Vista compatibility information is available for Sony Cameras and Camcorders.
  • The Windows Vista Starter edition and Windows XP 64-bit operating systems are not supported.
  • Feb 08, 2009 | Microsoft Windows Vista Ultimate Edition

    5 Answers

    My laptop contains windows vista and i want to install Windows XP

    i am using toshiba satellite l300model laptop. My laptop also contains windows vista. i want to install Windows XP as well. Some of my music software does not support Vista. Can you
    please help me on how can i install Windows XP and how can i download the
    XP drivers. I... Read more

    May 20, 2008 | Operating Systems

    Not finding what you are looking for?
    Microsoft Windows Vista Ultimate Edition Logo

    Related Topics:

    220 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Microsoft Operating Systems Experts

    Brian Sullivan
    Brian Sullivan

    Level 3 Expert

    27725 Answers

    Scott Fryer

    Level 2 Expert

    80 Answers

    Carlos L. Burgos
    Carlos L. Burgos

    Level 2 Expert

    508 Answers

    Are you a Microsoft Operating System Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides