Question about Hotpoint Ultima WF860 Front Load Washer
Error code F03 means that the wash thermistor is open circuit, this means that the water is not getting hot.
You need to fit a new thermistor first of all, if that does not solve the prob, then you will have to fit a new heater element as well.
You will normally find the element and thermistor located at the rear of the m/c.
Access it by removing lower rear panel
To get the parts, go to-----www.hotpoint.co.uk
Plz rate my solution.
Posted on Jan 19, 2009
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Sep 12, 2011 | Hotpoint Ariston WD440G Front Load...
Mar 27, 2010 | Hotpoint Ultima WF860 Front Load Washer
Dec 15, 2009 | Hotpoint Aquarius WD640 Front Load...
Dec 19, 2008 | Hotpoint Washing Machines
Dec 15, 2008 | Hotpoint Ultima WD72 Front Load...
Sep 04, 2006 | Hotpoint Ultima WF860 Front Load Washer
May 16, 2015 | Hotpoint Ultima WF860 Front Load Washer
1,159 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: