Question about Audio Players & Recorders

Open Question

Manual for proline cr99dab clock radio

Setting the alarm

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Set Clock

This clock has 2 alarms to set Alarm 1, switch alarm 1 to the "set" position and make sure alarm 2 is pushed to the "off" "radio" or "cathedral" position, press and hold the "alarm" button on top while pressing the "f.fwd" or "rev" button to set the alarm....to set Alarm 2, do the opposite of the set buttons and repeat...to set the time just hold the time button down while pressing "f.fwd" or "rev"...hope that wasn't too confusing.

Posted on Jan 25, 2008

  • 1 Answer

SOURCE: operating instructions for timex t311t radio/alarm clock

You can acces a PDF file of the manual at the following site: http://timexaudio.com/media/uploads/product/files/T311IB57574_35.pdf

Posted on Mar 04, 2009

  • 268 Answers

SOURCE: I need an instruction manual for my RCA Clock

There are three buttons under the heading "Dual Wake", WK1, Cancel, WK2. The WK buttons refer to the two wake time settings you can have. Press Cancel and then WKx. That will turn off the alarm. If you press WKx more than once, it will cycle through small symbols on the bottom of the screen with the number x in front of them. First symbol means it will have a sound alarm for alarm x, second symbol means it will have a radio alarm and the third symbol means it will play the CD to alarm. You set the time for alarm with the slide switch at the back of the unit, selecting WK1 for alarm 1 and WK2 for alarm 2. You can have both alarms active at once, or either one singly.

Posted on Jan 07, 2010

jyackle5
  • 8197 Answers

SOURCE: Emerson cks3528 Dual alarm clock radio smartset

You can get the manual on the link below. Please alow time to load large file.

http://www.emersonradio.com/owners/SmartSet%20Series/CKS3528_110606.pdf

Good Luck and please rate 4 thumbs up for the free answer

Posted on Apr 24, 2010

Testimonial: "Thanks SO MUCH!!!! I've tried every button or set of buttons to set the "wrong" time zone for correct DST just to mess up Date too. Thank you SIR!"

jyackle5
  • 8197 Answers

SOURCE: alarm clock GE model no. 7-4894A but no manual

You can down load the manual on link below for free.

http://ec1.images-amazon.com/media/i3d/01/A/man-migrate/MANUAL000045591.pdf

Good Luck and please rate 4 thumbs up for the free answer.

Posted on Apr 29, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I set time on proline CR99DAB clock radio


Try Googling (proline)(CR99DAB)(manual) without parens to get instructions.

May 08, 2017 | Audio Players & Recorders

1 Answer

Brookstone Model cks 2022 Alarm clock radio Instructions


I searched on your product name and found an instruction manual for a Brrostone self-setting alarm clock radio:
http://www.brookstone.com/webassets/pdf/607960p_manual.pdf

Apr 23, 2014 | Brookstone SmartSet Alarm Clock

1 Answer

Manual download


Here's a link to the manual for your clock: http://timexaudio.com/media/uploads/product/files/T307_IB56281_07.pdf

Dual alarm settings are on page 8, and I've included the specific instructions below. I would think that the '5' setting would be for Mon. - Fri., but let me know if that's not correct. Hope this helps!

"After setting the radio alarm wake time and sound, you will need to select the 7-5-2 setting. The 7-5-2 setting lets you set the alarm for a full week (7), weekdays only (5), or the weekend (2). Before setting the alarm, be sure that the correct date is set, as shown in the "Auto-Set" and Manual Time and Date Settings section of the manual. While the display is still flashing, press the Date/7-5-2 Button until the desired setting is shown."

Dec 17, 2013 | Timex (T307S) Clock Radio

1 Answer

Lost instructions for proline dab radio alarm clock


Hello
Try these links.

http://www.dataentryjobs.us/67948.html
www.worlddab.org/products_manufacturers/technology/dab?pdf=1
www.digitalradioaustralia.com.au/files/...Radio/.../Reciever_Guide.pdf

Feb 08, 2012 | Audio Players & Recorders

1 Answer

I have a proline DAB 100 alarm clock radio, I went


I am finding difficulty to set the clock on Proline dab 100 fm

Jan 03, 2010 | Audio Players & Recorders

1 Answer

How do I change the radio station on the radio alarm


Here is the full manual
http://www.timexaudio.com/pdf/T311IB57574_35.pdf

Here are the instructions from the manual.

Setting the Radio Alarm
1. Press and hold the
Radio Alarm Button. The display will flash and the Radio Alarm Indicator will
appear. If you do not begin setting the time within ten seconds of pressing the button, the display will stop
flashing and you will need to press the
Radio Alarm Button again.
2. While the display flashes, press the Reverse and  Forward Buttons to set the wake time. Hold a button
for a few seconds to set the time rapidly. Be sure to set the correct AM/PM time, as shown by the PM Indicator.
3. After setting the radio alarm time, you will need to select the station. First, press the  Radio Band Button
to select a radio frequency. Next, select a station using the Memory Set 1-6 Buttons. For more
information on programming radio stations into memory, see the Programming Radio Station Settings section
of this manual. Rotate the  Volume Thumbwheel to set the wake sound volume.
4. After setting the radio alarm wake time and sound, you will need to select the 7-5-2 setting. The 7-5-2 setting
lets you set the alarm for a full week, weekdays only, or the weekend. Before setting the alarm, be sure that
the correct date is set, as shown in the “Auto-Set” and Manual Time and Date Settings section of the manual.
While the display is still flashing, press the  Date/7-5-2 Button until the desired setting is shown.
5. After you have set the radio alarm wake time, sound, and 7-5-2 setting, press the  Enter Button. The
Radio Alarm Indicator will appear on the display, showing that the radio alarm has been set.

Aug 08, 2009 | Timex T311T Clock Radio

1 Answer

Do not know how to turn off alarm setting for clock radio


Instructions are here: the closest available RCA CD-CLOCK RADIO USER MANUAL online is for Model #RP5610 at this location: http://www.voxxsupport.com/images/manuals/RP5610/media/RP5610_DOC_OM.PDF

If unable to link to that webpage, go to RCA Tech Support page at: http://support.rcaaudiovideo.com/manual.aspx?product=143 and click on download manual.

Mar 13, 2009 | RCA Radio Alarm Clock

1 Answer

Lost manual for a timex t307s


Setting the Alarm 1 for AM/FM Radio
1. Press and hold the 2 Radio Alarm 1 Button. The display will flash and the Radio Alarm Indicator will appear. If
you do not begin setting the time within ten seconds of pressing the button, the display will stop flashing and you will
need to press the 2 Radio Alarm 1 Button again.
2. While the display flashes, press the 1 Reverse and 6 Forward Buttons to set the wake time. Hold a button for a few
seconds to set the time rapidly. Be sure to set the correct AM/PM time, as shown by the PM Indicator.
3. After setting the radio alarm time, while the display is still flashing you will need to select the station. First, press the
L Mode/DST Button to select a radio frequency. Next, select a station using the M Memory Set 1-6 Buttons. For
more information on programming radio stations into memory, see the Programming Radio Station Settings section of
this manual. Rotate the O Volume Thumbwheel to set the wake sound volume.
4. After setting the radio alarm wake time and sound, you will need to select the 7-5-2 setting. The 7-5-2 setting lets you
set the alarm for a full week, weekdays only, or the weekend. Before setting the alarm, be sure that the correct date
is set, as shown in the “Auto-Set” and Manual Time and Date Settings section of the manual. While the display is still
flashing, press the 9 Date/7-5-2 Button until the desired setting is shown.
5. After you have set the radio alarm wake time, sound, and 7-5-2 setting, press the 4 Enter Button. The Radio Alarm
Indicator
will appear on the display, showing that the radio alarm has been set.
Setting Alarm 2 for Nature Sounds/Buzzer
1. Press and hold the 7 Nature Sounds/Buzzer Alarm 2 Button until the Alarm 2 settings and Sounds Alarm
Indicator appear on the display.
2. Press the 1 Reverse or 6 Forward Button to set the Alarm 2 time.
3. Use the L Mode/DST Button to select a nature sound or the buzzer to wake to. There is a choice of five sounds:
Sound #1: Ocean Surf
Sound #2: Birds
Sound #3: Brook
Sound #4: Wind Chimes
buz: Buzzer
4. See Note #4 in the Setting Alarm 1 section for instructions on setting the 7-5-2 alarm setting for Alarm 2.
5. After you have programmed the Alarm 2 settings, press the 4 Enter Button or wait ten seconds to return to the clock
display. The Sounds Alarm Indicator will appear on the display, showing that the alarm is set.

Nov 18, 2008 | Timex (T307S) Clock Radio

1 Answer

I have an Emerson smart clock radio and cannot set the alarm


Sorry it took so long to give you a reply to your problem. [http://www.emersonradio.com/owners/SmartSet%20Series/] Copy this web link and paste it into the address bar of your web browser. The link will take you to the Emerson customer support web page that has pdf copies of the owners manuals for all the Smart Set Clock/Radio's. You will need to have a pdf reader and writer to read and make a copy of the owners manual. Find the make and model number of Your Clock/Radio and open the manual. You will find all the instructions for setting the alarm. If you are still having problems with setting the alarm. Call Emerson Customer Support at this telephone number 1-800-909-1240 between the hours of 8am-4:30pm CT. Tell them the make and model number of you Clock/Radio and ask them for assistance. I hope this information will help you with your problem. Thank you for using FixYa and have a nice day!

Oct 20, 2008 | Emerson Smartset Clock Radio

1 Answer

Set Clock


This clock has 2 alarms to set Alarm 1, switch alarm 1 to the "set" position and make sure alarm 2 is pushed to the "off" "radio" or "cathedral" position, press and hold the "alarm" button on top while pressing the "f.fwd" or "rev" button to set the alarm....to set Alarm 2, do the opposite of the set buttons and repeat...to set the time just hold the time button down while pressing "f.fwd" or "rev"...hope that wasn't too confusing.

Jan 01, 2008 | Timex Nature Sounds LED Clock Radio

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio Players & Recorders Experts

kakima

Level 3 Expert

102366 Answers

 Grubhead
Grubhead

Level 3 Expert

5056 Answers

The Knight
The Knight

Level 3 Expert

74136 Answers

Are you an Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...