Question about Office Equipment & Supplies
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
both light are blinking at the same time or blinking alternatively ?
if both blinking same time, it's a fatal error.. means it could be something wrong with the carriage or board or encoder belt...
if the light blink alternatively, it means the waste ink counter need to be reset and ink pad need to be replaced.
Posted on May 26, 2010
oh..try cleaning the encoder belt located behind the carriage unit.. it's a transparent strip with minor line.. DON"T clean with solvent or any liquid as it will damage the minor line... once damage you will have to replace the strip..just wipe with dry tissue
Posted on May 27, 2010
SOURCE: epson r230 general error
Blink alternately or not? If alternately, the message is not "general error". but "service required" It's true to reset waste ink counter. But, i think it's not service required. when trun on printer ready? But when start to print red lights blink at same time? Problem with chip at ink tank. Check connector at chip and at head carriage. It's may be dirty, and not good connection. try to use another chip.
Posted on Jun 24, 2009
Probably the waste ink tank is full.Try to do this:
First of all download http://www.mediafire.com/?hzxbdhkzxv9.Extract to your C drive. Run indoreset.bat, then follow the instructions.
After that right click AdjProg and select properties. Go to compatibility and select Windows XP.
Click OK at the bottom then right Click AdjProg and select run as administrator (if you have this
option). When working accept the agreement and go to
1. Particular adjustment mode,
2. Then waste ink pad counter,
3. Click Check
4. Tick both boxes.
5. Then initialization.
6. Then it's done.
Posted on Oct 16, 2009
Tips for a great answer:
Aug 22, 2016 | Epson L800 Ink Tank System Inkjet Printer...
Feb 10, 2015 | Epson L800 - printer - color - ink-jet
Jan 23, 2015 | Epson L800 Ink Tank System Inkjet Printer...
Nov 24, 2009 | Epson Stylus Photo R300 InkJet Printer
Sep 14, 2009 | Office Equipment & Supplies
3,876 people viewed this question
Usually answered in minutes!