- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You will need to purchase a suitable wall mount separately. (You'll need one for LARGE TVs.) On the back of your TV set you'll see there are 4 holes in the lower-central region of the rear panel. They are about 20" apart (left-right) and about 12" apart (up-down) These should match up with the bracket that comes with your wall mount. You will need M8 metric screws that are about 1.25" long. These will also be included with the wall mount. (Which will include some general directions for wall mounting.)
ok it depends on the wall mount but this is the basic idea of it. make sure there is at least one other person to help you.
1. Make sure everything is off and unplugged from the tv.
2. If you have cables holding your tv to the wall remove them.
3. there should be securing screws at both sides of the arms attaching the tv to the wall. loosen them/ remove them.
4. lift and pull the tv away from the wall. have a friend help you.
5. remove the screws and bolts from the tv and the wall mount and you should be done.
If this doesn't work, find the manual for the wall mount. if you need help or additional tips put them in the comments. Thanks
Yes it can as long as it has the screws in the back of the unit for the wall mount to be attached. You can call your manufacturer and retrieve the model number to the type of wall mount you desire. You can purchase a wall mount directly from manufacturer website or if you prefer can buy it from your local electronics retailer.
You can look in the instruction manual to see a diagram of the "Jacks" or "Holes", you will just have to work in Reverse, kind of (Instead of looking at it straight on), then you can figure out where the hole you're looking for.( If you dont have the manual goto the MFGRs website, under support/drivers or downloads, and download the manual. If this helps your problem, please give a fixya rating. It is appreciated