Question about Projection Televisions

2 Answers

Just bought a Toshiba d-vr7 recorder and am having problems getting it setup with my panasonic plasma 42" tv. I have had it to play a dvd no problem but cannot get it to play a vhs or do any recording to vhs or dvd. I need someone to call me to help getting the cables setup properly.

Posted by on

  • Anonymous May 09, 2009

    good afternoon,,trying to hook up my d-vr7 vcf to satellite dish and tv . i can play a dvd or vhs tape but can,t get it to record by timer ,can,t get code accepted into satellite box

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I called Future shop for free.

Posted on Jan 20, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

This unit is an unreliable piece of junk. After a few months, you will notice that this Toshiba D-VR7 will start locking-up randomly, require a system reset (pulling the power for over 10 minutes; then you reprogram everything ALL OVER AGAIN). It is very temperamental and has multiple bugs in its firmware; e.g. placing a finalized DVD into the unit will 'disable' many features on the VCR side of the machine. Toshiba is just plain weak and sloppy when it comes to DVD recording these days. Stay as far away from this unit as you possible can; buy panasonic or JVC but not this unit.

Posted on Sep 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a Toshiba DVD Video Player Model SD 260. I


Hello, The problem could be dirt on the surface of the lens, you can clean this by removing the cover of the dvd player . Gently use a dry cotton bud to clean the lens because the lens is fragile. Insert the disc plate into the dvd player and press play, if it does not play try the second method. Ensure the cover of the player is open, connect the power plug to the mains socket and observe the lens if it beam a red light, Also check the ribbon cable use to connect the lens to the printed circuit board, then gently clean the lens with a dry cotton bud , insert the disc plate and press play to see if it play. If it does not play the disc, then this require a change of the lens

May 20, 2010 | Projection Televisions

2 Answers

37" PANASONIC plasma tv, turns on, sound is good, but picture is not good. cannot see anything, except horizontal lines and statis (all snowy).


Is your Receiver/Cable hooked up right ?
check that.
If that doesn't help try going in video mode and playing a dvd with a dvd-player hooked straight in to the composite [Red/Yellow/White] plugs. then check if you get a picture if you dont the problem is most likely in your Tv

Is this Tv new ? or did it just start happening ?

Please respond with more details

Jan 13, 2008 | Projection Televisions

1 Answer

Have a toshiba tp 61H95 proj TV- want to connect panasonic dvd recorder and toshiba vhs recorder so I can copy family videos to dvd- can't get hook ups set up for both to work.


Select AV-1 or some thing in TV and plug DVD recorder Video-Audio output in AV-1 input of TV, playback any DVD and confirm its picture and sound in TV. Press Stop button of DVD recorder to stop playback.
Now plug Video-Audio output of VCR in DVD recorder input and select AV Input in DVD recorder, insert VHS tape in VCR and playback it and confirm you get VHS picture and sound in TV via DVD recorder.
Hookup between TV, DVD recorder and VCR is completed.
Playback VHS tape in VCR, Insert blank DVD disc in DVD recorder and press Record while you see VHS tape picture in TV.
Hope this info will help you.

Feb 03, 2010 | Toshiba TP61H95 61" Rear Projection...

1 Answer

Panasonic plasma TH-42PD50U 42 inch. My plasma is not able to switch tio dvd or any other machines. it will not change the volume either. the only thing we can watch is directv . The red power light blink...


without having a play with the remote its difficult to know exactly ,but either way their is a fault with your remote or the reciever in the actual set and the only way to get this sorted is the man with the right software to plug into the TV to diagnose the problem ,sorry to say it and that is to return the set with the remote to the dealer.

Dec 07, 2009 | Projection Televisions

1 Answer

DVD PLAYER ONLY PLAYS IN BLACK IN WHITE


Tries diffirence outputs.Like with a S-Video cable or a HDMI cable.Mighht just change ur RCA cable see what happen.

Sep 02, 2009 | Toshiba 42H81 42" Rear Projection...

1 Answer

Can't get toshiba vcr to work with toshiba TTP-61H95 and dvd


please make sure the cable from ur vcr is attach at V-OUT...and cable from vcr that attach to dvd is V-IN...to make sure vcr is displayed at your tv, unplugged cable from vcr-to-dvd to from vcr(V-OUT)-to-tv(V-IN)...

Jan 10, 2009 | Toshiba TP61H95 61" Rear Projection...

1 Answer

Not sure how to connect surround system to tv


Hi
Look on the rear of the tv and there should be an audio out connection coloured red and white and this will be a phono connection ( 2 small holes one red and one white) using a phono lead connect this to the same connections on the surround system only this time this will be an audio in connection select the tv channel on the surround system and ensure the tv is on and off you go. Try this and see how you go.

Dec 28, 2008 | Panasonic Projection Televisions

1 Answer

Hi I bought a Panasonic 42 Inch class 720P Plasma HDTV TH-42PX80U, the picture is fine, but there is a humming sound in the background of the audio. The louder I turn the tv the louder the hum. I tried...


If turning up the audio amplifies the problem, it is in the initial stages of audio. It could very likely be outside the TV, try difference sources to troubleshoot your setup. If it hums on all inputs, the problem is before your audio switch and could be on the board with the AV jacks. Note all plasma tvs hum out of the back of the tv (ie power board, y-sus, z-sus board and panel all make a little hum noise)

Dec 06, 2008 | Projection Televisions

1 Answer

I have a Panasonic DMR-ES30VEB. Video and DVD recorder. It won't play any shop bought Video's. No picture, No sound. Video's I have made myself I can watch. Picture and sound fine. When dubbing shop...


Are you playing it through the vhs mode. It will not play through the dvd mode via 'TJ' or dubbing as the dvd record function is macrovision protected
regards

snapper

Nov 26, 2008 | Projection Televisions

1 Answer

I have a panasonic dvd recorder DMR EH50 and I know this makes me a really techno "dummy" but I can't understand how you connect the player to the tv to make it record. I've got it so I can play...


My dear friend you need to connect the signal source direct to the dvd and then to the tv.If you got cable you need to connect it to the input of the dvd and then connect the output of the dvd to the tv set.
And when you go to record put the channel on the dvd

Aug 25, 2008 | Panasonic Projection Televisions

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

337 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

60667 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...