Question about Toys

Open Question

Its a rc heli Walkera 180D receiver part # RX2423-D trying to pair or comunacate with the controller a Walkera WK-2402

Posted by on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 199 Answers

SOURCE: I recently bought a Walkera 43g heli with a 2801

This sounds like low power on the receiver BEC or the transmitter battery power. Check the voltages and cell polarities. You should not be getting interference with the 2.4 G system. If this is not the problem then I would send it back.

Posted on Aug 17, 2009

  • 1 Answer

SOURCE: replace tail rudder blade on walkera cb 180d

yea cut it off longways down the shaft with large parrot nose plyers finish with little ones back up shaft and drive on rotor with small deep well socket simple!,

Posted on Apr 20, 2010

  • 2 Answers

SOURCE: i brought a new syma s006 alooy shark rc heli and

Your should exchange the product at the store you bought it from for another one. the problem lies inside the syma. it must have been a defect that the company did not notice.

Posted on May 09, 2010

male_28_cam
  • 1555 Answers

SOURCE: i need to know what

I'm providing you a link below for the motor which is available for 19$ online suitable for your heli.
http://www.hobby-wing.com/hm-68b-z-38.html

Posted on Mar 27, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I bought an RC T-40, first 2 flights were ok,right after the controller and the heli dont connect, l.e.d. on both are blinking and neither of them work. any ideas on how to fix it?


you need pair the device
to slowly move the left controler all the way up up then down, wait 3 seconds
it will beep this means its done the "pairing" is complete now fly away :)

Dec 26, 2014 | Jumbo RC JUMBO HELICOPTER

1 Answer

Rc heli not responding


Make sure you have good batteries in the controller; if you are using it to charge the heli from they drain really quick. Good luck and have fun.

Feb 25, 2014 | Brookstone uControl Cloud Force RC...

1 Answer

Rc helicopter loses connection


Check the transmitter crystal (if it has one) and check the wires in the heli's receiver unit.
You should turn heli on wait 3-secs then turn transmitter on.

Dec 26, 2013 | Toys

1 Answer

Replace tail rudder blade on walkera cb 180d


yea cut it off longways down the shaft with large parrot nose plyers finish with little ones back up shaft and drive on rotor with small deep well socket simple!,

Apr 01, 2010 | Walkera #35C: Main Rotor Blade (Fiber...

1 Answer

Have a 5#10. Even on full battery the tail wobbles left to right and the heli rotates right continually even when trimmed fully to the left - can you help?


REMOVE CONTROL HORNS AND SET SERVOS TO CENTER POSITION WITH RADIO AND RECONECT HORNS TO SERVOS ,COULD HAVE SLIPPED ON SERVO SPLINES DUE TO A HARD LANDING.

Jan 20, 2010 | Walkera HM5#10 RC Helicopter

1 Answer

I have bought 2 Walkera heli, and I have had problems with both, the RTF is not, the manual tells you little about it , The LI poly battery almost blew up and the other bat wont hold a charge, what do I...


Did the charger come with the helicopters? It sounds like the packs are being overcharged or charged at too high of a current. Lipo packs are more sensitive to charging and discharging than NiCD and NiMH packs. I got my first helicopter last year so I don't have as much experience with them as cars and trucks, but I will help if I can. I have a Venom Beacon that came RTF with a Lipo pack and charger and I have not had any problems. I would also suggest a Lipo sack to put the packs in while charging. It would keep them from catching fire if they would happen to explode. Good luck.

Jan 01, 2010 | Walkera Co Axial 5 8 Metal Head Dragonfly...

1 Answer

I recently bought a Walkera 43g heli with a 2801 2.4 Ghz transmitter. The servos chatter and the heli is unflyable and very unstable and near-impossible to hover. I am experienced enough to flyout other...


This sounds like low power on the receiver BEC or the transmitter battery power. Check the voltages and cell polarities. You should not be getting interference with the 2.4 G system. If this is not the problem then I would send it back.

Aug 17, 2009 | Toys

1 Answer

Walkera 37 remote heli


Swap over the two wires that go from the motor to the speed controller. NB. don't swap over the wires at the battery this will destroy the speed controller.

Feb 25, 2009 | Walkera Dragonfly #68 7 Channel 3D...

Not finding what you are looking for?
Toys Logo

Related Topics:

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toys Experts

kakima

Level 3 Expert

102366 Answers

yadayada
yadayada

Level 3 Expert

74896 Answers

ray gallant

Level 3 Expert

41375 Answers

Are you a Toy Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...