Question about Lexmark T650n Laser Printer

Open Question

Printhead error 935.10

Printhead error displays on LCD display

Posted by Anonymous on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 320 Answers

SOURCE: Lexmark T642 When printing, LCD displays

this error is a scanner lost lock error and can be caused by the scanner or the logic board. if this error comes up immediately on power up the scanner motor is not initializing by percentages of failure the scanner is approximately 85% the logic board 15% i would change the scanner

Posted on Nov 28, 2009

printmastert
  • 3344 Answers

Creating Customers For Life

    Verified Fixya Pro

    SOURCE: 935 service printhead error

    Hello. Unfortunately, if that's the case, there's not much you can do about it but have it serviced. Hope I can assist you more with it.

    Posted on Apr 06, 2010

    • 37 Answers

    SOURCE: error 935,10 service printhead error.

    The printhead is the laser, tou have an error in the laser assembly (replace the laser assy).

    Posted on Feb 23, 2011

    Add Your Answer

    Uploading: 0%

    my-video-file.mp4

    Complete. Click "Add" to insert your video. Add

    ×

    Loading...
    Loading...

    Related Questions:

    1 Answer

    Why display error printer head too hot


    According to the user manual, when this error occurs, The printer stops; the ERROR light flashes.
    Caution •

    The printhead may be hot enough to cause severe
    burns. Allow the printhead to cool.

    The printhead is over temperature. Allow the printer to cool. Printing
    automatically resumes when the
    printhead elements cool to an
    acceptable operating temperature.

    Jul 03, 2014 | Zebra 110Xi4 RFID Label Printer Transfer...

    1 Answer

    My printer HP photosmart plus B210 series displays error message


    >> Remove the print head and gently clean the head.
    >> Check is there any obstructions on it.
    >> Turn Off the printer for 2-3 minutes and turn On.
    >> Re-insert the print head and check the status.

    It may help.

    Nov 25, 2013 | Computers & Internet

    1 Answer

    Printhead error


    A firmware update for your model addresses the "printhead error" on your printer. First, get rid of error message on the display screen to successfully update your printer firmware.Open the cover to remove the printhead and tanks (if installed). Note: Carrier will come to the center automatically with this error message as the cover is opened.
    Then proceed with the firmware update. Please visit the Lexmark website at http://bit.ly/s405fw to download and install the firmware update.
    Should you need further assistance, please don't hesitate to contact Lexmark Technical Support Center.

    Mar 10, 2012 | Lexmark Interpret S405 Wireless All-in-One...

    1 Answer

    Cannon MX340 printer - error code 6500


    If the printer is not working properly or to clear memory try this:
    1. On the operator panel, press and hold the ON/OFF button for one second. (The display will go blank.) Note: It may be necessary to unplug the power cord if pressing the ON/OFF button does not shut off the printer.
    2. Wait approximately ten seconds and then press the ON/OFF button again.
    3. Wait until the device has completed its cycling process before submitting another job request.
    Or Try This:
    To clear error messages displayed on the LCD or if the printer is not functioning as expected, it may be necessary to simultaneously press Stop/Reset and ON/OFF buttons.
    1. With the printer powered on, press and hold down the Stop/Reset button then press the ON/OFF button.
    2. Once the printer is powered off, hold down Stop/Reset and then press ON/OFF.
    Or Try This:
    Reseat the printhead (printhead may also need replacing)

    Aug 13, 2011 | Office Equipment & Supplies

    2 Answers

    Error 935,10 service printhead error. e450dn


    The printhead is the laser, tou have an error in the laser assembly (replace the laser assy).

    Feb 23, 2011 | Lexmark E450dn Laser Printer

    1 Answer

    Solid red indicator on panel display. Error message displayed - Fault 37005,41:154334. printer unable to print.


    It sounds like your Model number is a 8500 or 8560 series.

    Unfortunately, this error code means that the Printhead is defective-- Reservoir # 1 is not drawing power from the supply.

    You could buy the printhead 046K00530

    Whit
    Item, Inc.

    Aug 27, 2010 | Office Equipment & Supplies

    1 Answer

    Lexmark T642 When printing, LCD displays


    this error is a scanner lost lock error and can be caused by the scanner or the logic board. if this error comes up immediately on power up the scanner motor is not initializing by percentages of failure the scanner is approximately 85% the logic board 15% i would change the scanner

    Nov 23, 2009 | Lexmark T642 Laser Printer

    1 Answer

    Hp designjet 1050c printer displays a system error


    Hi,
    Printhead failure this is.

    Turn the printer on.
    Following initialization,
    use the Down Arrow key to scroll to the Ink system menu icon and press Enter.
    NOTE:If the error code appears during initialization press the Enter
    key to allow printer to complete the rest of the initialization process.
    Scroll to Replace Printheads and press Enter.
    The printer should now move the carriage to an accessible position.
    Open the top cover.
    Remove all four printheads.
    Turn the printer off using the main power switch located on the back of the printer.
    Turn the printer on.
    Following initialization, insert one printhead at a time, starting with the black printhead.
    Determine whether or not the printer accepts the printhead.
    Turn the printer off and repeat steps for each of the printhead.
    Replace the failed printhead.

    Hope this helps
    Regards

    Apr 17, 2009 | HP DesignJet 1050c InkJet Printer

    3 Answers

    Tally T2280 THS ERORR 001


    I have been told that this is a Printhead, or Logic Board fault.

    Git rid of it on customers by cleaning printhead(two screws then taking printhead out & cleaning connections, Replacing).

    But now i have THS error 009 ??

    Dec 11, 2007 | Tally Matrix T2280 Printer

    Not finding what you are looking for?
    Lexmark T650n Laser Printer Logo

    Related Topics:

    1,919 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Lexmark Office Equipment & Supplies Experts

    Roopesh S
    Roopesh S

    Level 2 Expert

    228 Answers

    Les Dickinson
    Les Dickinson

    Level 3 Expert

    18390 Answers

    Doctor PC
    Doctor PC

    Level 3 Expert

    7733 Answers

    Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...