Question about KitchenAid Food Mixers

1 Answer

I need a replacement motor on a KitchenAid Professional HD Stand Mixer (Model KG25H7XSL).

I have a KitchenAid Professional HD Stand Mixer with the 475 110 watt motor. I have used this in FR for five years using a converter to power the 110 motor on 220 current. This weekend my daughter plugged the mixer directly into the outlet and there was a loud "pop" and the mixer no longer functions. Should I be able to fix this by buying the replacement motor or should I expect additional damaged components, if so, which ??? It was the KitchenAid Professional HD Stand Mixer with the 475 110 watt motor. Also, does anyone know if a motor is produced for 110 to 240 volt for this product? Thanks.

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 118 Answers

The loud pop was probably the soft start circuit board on the motor. You can buy this board at repair sites or Ebay. And yes, they make 220V versions of this mixer.

Posted on Dec 31, 2012


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Kitchenaid mixer Professional HD 475 watt, unknown model number. Power switch goes straight to a higher speed in the STIR setting. Need to figure out model to find parts.

The Service Manual for this model (yes, it covers the 5 qt. model as well) can be found at:

Aug 27, 2017 | KitchenAid Food Mixers

1 Answer

How to fix a Kitchenaid Professional HD Stand Mixer?

Remove the top cover, screws are under the metal trim band with the writing on it. Get a multi meter and follow the power. Where the power stops is a good place to start looking. I think the electric internals consist of a PCB complete and a motor complete. If the motor has a circuit and both field windings are even resistance then you are probably looking at a pcb replacement unless you are an electronics whizz. There may also be an interference suppressor across the mains power supply in some countries, unlikely that will stop it though. Certainly look for any unplugged or broken connections inside from mains cable to pcb.

Feb 04, 2015 | KitchenAid Professional Hd Stand Mixer...

1 Answer

KitchenAid mixer,model # KG25H0XMC5 will not turn on.

Check different outlet. Make sure the outlet isn't at fault.

Aug 01, 2014 | KitchenAid New Professional 5.5 QT...

1 Answer

Kitchenaid professional HD leaking shavings

If they are metal shavings you have a bad gear in the motor head. needs tear down and new gears. YouTube video will show you how to do it easier than I can write it. If you don't find it let me know I can point you to it or walk you through it. Going to cost around 70 dollars

Aug 09, 2013 | KitchenAid KP2671 Professional 6 Series...

1 Answer

Stir/first level goes fullspeed and then turns off automatically

It shouldn't do that, and I really doubt there's anything you can do about it other than to have the defective part replaced. It sounds to me as though there's a problem with the control mechanism. If the machine is still under warranty, contact Kitchenaid to see about getting it repaired or replaced. If not, get the name of a local shop that repairs Kitchenaid mixers -- from your description of the problem, the mixer is nearly unless in its current state.

Jul 10, 2009 | KitchenAid Food Mixers

1 Answer

Kitchenaid pro stand mixer will not turn on I has been sitting for 3 months without being used. It is a 475 watt bowl lift 6 qt mixer. about 3 years old.

How comfortable are you with electrical parts? With the mixer UNPLUGGED and the switch ON measure resistance between the (flat) plug pins. If it's infinite (no meter movement) which is to be expected, there is an open circuit. The switch could be open or the wire to the switch could be disconnected (improbable) or the motor could be burned out and open (not very probable).

Maybe you could take the switch to a shop and have it tested.

This is not really a solution, just step 1.

Feb 27, 2009 | KitchenAid K45SS Classic Stand Mixer

1 Answer

Power On Problem

Check to see if the contact points on the control board are working. Adjust the screws at the top of the control board until the contacts make contact. That should fix your problem.

Feb 13, 2009 | KitchenAid KP2671 Professional 6 Series...

Not finding what you are looking for?
Food Mixers Logo

Related Topics:

288 people viewed this question

Ask a Question

Usually answered in minutes!

Top KitchenAid Food Mixers Experts

Appliance engineer

Level 2 Expert

87 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

jack arons

Level 2 Expert

44 Answers

Are you a KitchenAid Food Mixer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides