Question about Canon PIXMA MP210 Photo All-In-One Printer
Typically, one end of the carriage belt is stationary relative to the chassis and the other has some kind of spring mounting for the idler so the slight natural stretching of the belt is compensated for.
You may have to remove the housing to access both drive gear and idler. This may be a teeth-gritting job since housings are often snapped together and are a little tough to remove. If you do, check for the plastic band that the unit uses to determine position of the carriage and with a soft cloth or paper towel moistened with some window cleaner, pince the band gently and clean the length of it. These tend to get soiled with time and the unit needs it clean to find its position.
Don't be surprised if the carriage slams against one or the other end when first turned back on. If it is positioned in its normal park area, this shouldn't be a problem.
Posted on Jan 18, 2009
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Jul 06, 2011 | Canon Office Equipment & Supplies
Feb 16, 2010 | Canon PIXMA MP210 Photo All-In-One Printer
Oct 12, 2009 | Canon Office Equipment & Supplies
Jun 21, 2009 | Dryers
Jun 02, 2009 | Canon PIXMA MP210 Photo All-In-One Printer
Aug 03, 2008 | Office Equipment & Supplies
Jan 03, 2008 | Office Equipment & Supplies
194 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: