Question about Lenovo IdeaPad S10-3t 0651 Notebook
The light for the charger is on and not blinking. I hold the power button down and nothing happens.
Posted by Anonymous on
For this kind of issue, please follow up the following steps to check:
1.confirm your Lenovo IdeaPad S10 ac adapter and battery connect the laptop normally.Maybe the bad connect lead to this problem. If there are no lights when you turn on laptop, one of possible reason is that your adapter is malfunction.
2.the second possible cause is laptop dc jack failure. If the dc jack is broken or loose, you are required to replace it or repair it.
3.Another possible reason is that there is something wrong with laptop motherboard. For this situation, it includes two kinds of possibility,a failure in an electronic circuit and BGA malfunction.
For more detailed reasons and solutions, please have a look at the following article:
Posted on Jan 03, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tyr to power drain the computer, removed the battery and the unplugged the charger the press and hold the power button for one minute, obviously it will not turn on. Then after one minute, connect the laptop directly to the power outlet and then turn it on, if its still the same, theres a possibility that the problem is with the MOBO or the LCD itself
Hope this will help...
Posted on Jan 19, 2011
SOURCE: My laptop won't turn on
Can you remove the battery? If so pop it out and leave it out for a couple of minutes then pop it back in and see what happens.
Posted on Oct 26, 2008
SOURCE: Lenovo Think Pad T61P dead.
Did you try removing the battery pack and then putting it back in? I had disconnected my AC, closed the lid, put it in my backpack and went to the office. The battery light was on when I left but by the time I got to the office it was DOA. After checking the AC at the office I took out the battery pack and put it back in. Voila.
Posted on Feb 14, 2010
Keep pressed the power button of your laptop for about 30 seconds, the machine will power down.
--The above step may not be required as already so many days passed by.
Then plug it into the power adapter.
Switch the laptop on.
Boot in "safe mode" (F8 during boot).
This will fix any driver or some operating system issue during previous failed boot process.
Once it boots completely, do a normal shutdown and reboot your laptop in standard mode (no more F8 this time).
Now your laptop will be ready to use.
Posted on Nov 09, 2009
Tips for a great answer:
Apr 13, 2013 | Computers & Internet
Aug 06, 2012 | Dell Vostro 1400 Laptop Computer (Intel...
Jul 27, 2012 | SanDisk Cruzer Micro 2GB USB 2.0 Flash...
Jun 07, 2011 | Computers & Internet
May 13, 2011 | Toshiba Computers & Internet
Dec 23, 2010 | Lenovo G550-29583AU Notebook
420 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: