Question about Office Equipment & Supplies
Hello, the good news, though, is that all Uniden/Bearcat scanners in
the 14X series are nearly identical in features and operation, so you
can follow the link below to download/print the manual for the BC148XLT:
You need adobe reader to read the content.
Posted on Dec 31, 2012
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
A number of scanner manuals can be found online however I don't know the difficulty of finding it for this unit. More than likely if you need printed material sent to you it will cost you.
To program the BC142xl 10-channel scanner:
Press the Manual button. Continue to keep pressing the Manual button until you are at one of the ten channels you wish to program the frequency into
Press the E button
Enter the frequency you want to store in this channel
Press the E button - Your frequency is now stores in this channel.
To later see what frequencies you have stores use the Review button.
Posted on Jan 27, 2010
SOURCE: LOST MY MANUAL TO MY
The manual isn't online to my knowledge however I did find a guide on how to program it.
"Turn it on. Push the "MANUAL" button to stop it from scanning.
Push number 1, then push "MANUAL" again. This should leave you on
Using the keypad enter the frequency you want to monitor, then push
"E." Press "REVIEW" at anytime to see what frequency is programmed
there. If the review button flashes 000.0000 on the LED readout
display, you might be entering an invalid frequency. Refer to the list
of acceptable frequencies in the Frequency Range Bands below.
Push "MANUAL" to step to channel number two. Enter the frequency. Push
"E." Push "MANUAL" to step to channel three. Repeat this process until
all the (10) channels are full, or you've run out of frequencies to
Push "SCAN" to start automatically scanning the frequencies. The
radio will stop when it hears someone talking, and resume scanning two
seconds after the conversation has stopped.
Frequency Range Bands:
20 to 29.7 MHz (10 Meter "Ham" Band)
29.7 to 50 MHz (VHF Low Band)
50 to 54 MHz (6 Meter Amateur Band)
136 to 144 MHz (Military Land Mobile)
144 to 148 MHz (2 Meter "Ham" Band)
406 to 420 MHz (Federal Government Land Mobile)
420 to 450 MHz (70cm "Ham" Band)
450 to 470 MHz (UHF Standard Band)
470 to 512 MHz (UHF "T" Band)"
Hope this helps.
Posted on Apr 22, 2011
Tips for a great answer:
Feb 22, 2016 | Uniden Bearcat BC142XL Radio Scanner
Jan 14, 2016 | Uniden Radio Communications
Oct 16, 2015 | Uniden Bearcat Model Bc142xl 10 Channel...
Jan 04, 2014 | Radio Communications
Apr 28, 2011 | Office Equipment & Supplies
Oct 30, 2009 | Radio Communications
Aug 05, 2009 | Uniden Office Equipment & Supplies
246 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: