Question about Amana ARB2205C Bottom Freezer Refrigerator
Clicking noise by compressor every few min. coils were needing good cleaning,I did that.
Step 1:Remove back cover.
Step 2:Remove the wire hold the relay in place.
Step 3:Remove wires from old relay and replace.
Posted on Dec 31, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I can help , It was the relay , they can blow when they experience a hard start , by replacing it and having the same issue this means the compressor is locked up , they sell a booster for this that can sometimes free the compressor up , its called an rco410 , this part will be your only chance to get your compressor going again. let me know if you have any other questions and tell me how it works out.
Posted on Jan 07, 2009
SOURCE: amana side by side coil cleaning
removethe lower kickplate , under the doors, then with a refrigeration coil brush(avaailable at te hhradware stores) and a vaccumm you can clean the coils
Posted on Feb 16, 2009
If you replaced the compressor start relay then if the compressor refuses to start, then it is an internal problem with the compressor.
If the start components that mount to the compressor body also include a capacitor, it could have failed as well.
If your machine does not include a capacitor, you can try what is called a 3 in 1 which is what is called a hard start kit,
But is an iffy path to follow, and may either not work at all, or for only a short time.
P.S. If the machine is under 5 years of age. Leave it alone and call your selling dealer for a warranty repair. The compressor has a 5 year warranty on it.
Posted on Nov 15, 2009
they had problems with some compressors siezing up due to lubrication issues.refrig not cooling probably air flow problem.either fan in freezer section not working,coils iced up,or return air vent blocked
Posted on Jan 25, 2010
Amana refrig have 2 main problems . 1 is the defrost bimetal ( 1" cylinder at the top right on the freezer coils with 2 wires ) and the other is a refrigerant leak where the copper tubing joins the aluminum tubing at the freezer coils ( evaporator coils ) . If your freezer fan is not working and you have frost on the freezer coils then replace the bimetal as this also controls the defrost heater ( defrost thermostat ) . If you have no frost on the coils ( for both checks , you will have to remove the inside rear freezer panel , maybe 12 screws ) , then a refrigerant leak has happened and the best solution would be to replace the refrig .
Posted on Jul 18, 2010
Tips for a great answer:
Sep 02, 2011 | Amana AFD2535DES French Door Refrigerator
Jul 06, 2011 | Refrigerators
Oct 19, 2010 | Amana ARB1905C Bottom Freezer Refrigerator
Oct 02, 2010 | Amana ARB220RCW Bottom Freezer...
Sep 26, 2010 | Amana ASD2620HRW
Many times a freezer and/or refrigerator do not work right because of a dirty condenser coil...there are also many other things that can go wrong.
If you are hearing a clicking or buzzing then check out the last two tips.
If your refrigerator is running but warm, then...
Check out these tips that I wrote about that... it is a great place to start trouble shooting your unit...and something that you can do rather then calling a repair person to do a simple thing for you...
Refrigerator Condenser Coil Cleaning Refrigerator Repair
Refrigerator Troubleshooting Refrigerator Compressor
Refrigerator Compressor Start Capacitor and Start Relay
Sep 02, 2010 | Amana ARB1905C Bottom Freezer Refrigerator
Aug 06, 2010 | Amana ARB1905C Bottom Freezer Refrigerator
Mar 25, 2009 | Amana ARB1905C Bottom Freezer Refrigerator
Jun 26, 2008 | Amana AFD2535DES French Door Refrigerator
Jul 25, 2017 | Amana ARB2205C Bottom Freezer Refrigerator
165 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: