Question about Sanyo DS32224 TV

1 Answer

Grey Screen The TV will display the blue screen to choose your dvd player etc as long as nothing is plugged into the rca or componet etc.. But when you plug in the dvd player or other componets the screen goes to a grey color and shows shawdows in the background and the sound works fine. My stupid brother in law feel asleep with the PS2 going one night and we woke up to this little deal ,any ideas?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 432 Answers
Re: Grey Screen

Try the reset on the remote. Press this key twice to restore factory settings. The TV will automatically start Channel Search and clear all customized settings. These features will automatically reset: ? Picture/Sound Adjustments: Color, Tint, Contrast, Brightness, Sharpness, Color Enhancer, Tone, and Surround Sound ? Channel Memory ? Audio to Stereo ? Caption to OFF ? V-Guide to OFF ? Aspect Ratio to 4:3 (normal) ? Menu Language to English ? Sleep Timer (if previously set) ? Video to TV (if previously set) If desired, personal settings can be made again using the menu options

Posted on Jun 23, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

When i plug my AV coil in my philips TV the screen goes dark

If the DVD player is playing and you have the Scart lead plugged in, check what the playback system is, Your TV is probably Composite Video and the DVD player may be set to RGB for example.

Mar 14, 2014 | Standard (CRT) Televisions

1 Answer

Screen has gone grey and has fine horizontal lines on entire screen. Blue screen is out.

Either the screen voltage to picture tube is more than normal, or the video processor IC has damaged. There is an other possibility that there is no voltage at the video output card, plugged on to the neck of the picture tube. Anyway, your set need a through checkup, and the work is somewhat skilled one. Just check this site. Soemtimes you might get some details about this fault. The fault is called vertical retrace lines. Thin horizontal lines all across the screen with an inch apart. One among the posts published in the following site have details about this fault.
Visit the site named 'Electro-help' for more details. Click this link. View it in "Timeslide" or "Flipcard" option, which can be selected from the drop down box menu by the [Sidebar] tag, at the top left corner of the display window. It will make search easy. There are more than 1250 posts to different brand TVs now. Pull up older posts there.

Nov 23, 2012 | RCA F32672SB 32" TV

1 Answer

I have a rca truflat i can't get the dvd to play

are you sure you have plugs and source input the same.the tv has several diff.inputs look on back what inputs you are using then go in menu move input to the same

Dec 24, 2011 | RCA TruFlat 27F520T 27" TV

1 Answer

Rca 20F514TD blue screen

What to do if you have an all snowy picture (blue screen or the TV displays unusable signal-no signal or no sync)
1 – If you are using a digital cable box or satellite receiver (make sure it’s on) and be sure your TV is set for either CH3 or CH4 (which ever you usually view it on). If you usually view it through video inputs (video1 or 2 etc.) make sure the appropriate input is selected.
If you still don’t get a signal see if you get picture using the DVD or VCR (if available) if you do than plug the satellite or Dig. Box temporarily into the place of the DVD (unplug DVD) you may have to use some A/V cables (RCA yel./red/wht like the ones on the DVD) to hook to the tv from the sat./dig. box. If you get a signal then the sat./dig box is ok. If not the Sat./dig box is not sending a signal and is either defective or needs to be rebooted (unplug wait 5 min try again).
2 – If you are using standard cable or antenna (source) if possible check that the source is good by connecting to another TV. Otherwise try running the source into a VCR and then out to the TV using video inputs (RCA yel./red/wht like the ones on the DVD) and then selecting the appropriate input. Try seeing if the VCR plays using standard CH3 (or CH4)
If the VCR plays on video input but not when connected to CH3 (CH4) then the tuner of the TV may be defective – see if you can use the VCR to change channel using the VCR remote.
Be sure to vote/rate me if this helped Thanks!

Nov 05, 2009 | RCA 20F514TD 20" TV

1 Answer

Blue red green lines around people images

this is caused by some kind of electrical interference. this can be caused by cd players,speakers, etc being too close to the tube. after you find the culprit and remove or move, unplug tv for about 10 mins, then plug back in

Sep 06, 2009 | RCA F32649 32" TV

1 Answer

Blue screen only

double check the input, the simple way is using a good DVD player and good A/V Cable. plug in the A/V cable in DVD A/V output, then plug the other plug into TV A/V input. Then set your tv to AV input. if nothing comes out even though the dvd player is playing. The TV AV switch maybe damaged.

Jun 02, 2009 | Prima C2012 TV

1 Answer

Rca f27442 input button not working

REset your parental rating.

May 11, 2009 | RCA F27442 27" TV

1 Answer

Can't get new DVD player to play

On some sets there is a button on your remote marked "TV/VIDEO" or some such text. With your tv and player hooked up and working, pushing that button will switch from TV to video and back.

On other sets, if you keep changing channels, you will eventually come to one that turns off the video broadcast and plays the DV.

Good Luck

Mar 13, 2009 | Sanyo Standard (CRT) Televisions

2 Answers

DVD player won't work on my 27gt615


good day, if youre saying that you program the DVD to work on channel 2 or 4 does it mean you convert the signal of your dvd player from A/V output to RF out?

because the simpliest way to connect your DVD player to TV screen is by using RCA cable ( 3 wired cable being color marked as yellow/red/white) yellow = video red and white = audio

the connection would be: from dvd back part you'll see colored socket yello/red and white. connect the RCA to those socket following the same color .

and from the TV screen there should be A/V input socket. can be locate at the BACK/Side or FRONT of the screen marked as
"INPUT" ( AV1, AV2,AV3 if multiple inputs). Then select which input you want to place your DVD player ex.AV1 (from AV1 there will be 3 scoket in a row, yellow/red/white)

Connect the other end of your RCA cable following the same color code to TV "AV1 INPUT" yellow = yello/red =red/white=white. then from the remote commander of your TV screen locate a button marked as "TV/AV" or "A/V" press this button until the screen display switch to AV1.


Jan 31, 2009 | GE 27GT619 27" TV

2 Answers

Blue screen on all channels RCA TruFlat

This is NOT the problem. video games, dvd player and cable connection are all all a blue screen with sound

May 14, 2008 | Standard (CRT) Televisions

Not finding what you are looking for?
Sanyo DS32224 TV Logo

244 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sanyo Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

66578 Answers

matt martin
matt martin

Level 3 Expert

1187 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Sanyo Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides