Question about Masterbuilt Electric 30inch Smokehouse Fast FREE FedEx Shipping!

Open Question

Masterbuilt 20070910 won't turn on - Masterbuilt Electric 30inch Smokehouse Fast FREE FedEx Shipping!

Posted by Anonymous on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
kel1guy2002
  • 3740 Answers

SOURCE: Masterbuilt smoker model 20070910 with

Hi and welcome to FixYa, I am Kelly
It is telling you that the temp is below 40 degrees F. All you need to do is warm up the temp probe to 40F and it should work just fine. Use a hand held hair dryer or a warmed up shop vac on b.l.o.w to warm it up.

Happy New Year,
Kelly

Posted on Jan 01, 2011

Ad
  • 7 Answers

SOURCE: I purchased a masterbuilt smoker in Jan/2010 Model

Try this...

I just bought a new Masterbuilt Smoker by default two weeks ago I borrowed a friend’s to smoke about 30lb. of Salmon to then can. Ran the smoker every day for three day. ON my last batch the heating element would not work. Talk about Frustrated! The Smoker was only 2 yrs. old.

Knowing I borrowed I felt I had to replace. So online to Cabelas and I ordered my buddy a new smoker and had it shipped. I then found this website... GOT TO LOVE the internet. I saw many other people had the same problem. Found an Answer...

The Problem was one of the connector to the heating element was poor quality and if you don't clean your smoker on a regular basis. The heat and moister caused the small copper connector to corrode and the wire to come loose. I took a wood chisel and cut off all the rivets on the back. I was then able to pull the back off with no damage and access the small box in the lower back. I found the connector. Went to the hardware store and bought a replacement for .75 cents. A pair of wire crimpers and the problem was fixed. I also bought ½ inch Sheet metal screws to secure the back it was good as new. So I returned the smoker to my buddy and kept the new one. When it arrived I saw Masterbuilt has since fixed the problem and provided an access panel to the element and connectors.

Mike in Alaska

PSU313@yahoo.com

Posted on Jul 03, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My smoker won't heat over 100 degrees, what part do I need to replace


Throw it away and buy a new one made by a different company. I just tried to call Masterbuilt and after a 45 minute wait got an overseas call center with a person who could barely speak English and I couldn't understand. I will not do business whit a company that does not think better about their customers than this.

CG Texas

Nov 13, 2011 | Masterbuilt 20070106 Electric Smoker

1 Answer

I need an element for Mod: 20070106 Ser.# GA040925


You can purchase a new heating element part # 990050051 either from Masterbuilt or from Factory Appliance Parts http://www.appliancefactoryparts.com/gasgrillparts/brands/masterbuilt/
If they are still available. All of Masterbuilt's electric smokers have been plagued with electrical problems.. It's either the element or the electronic controller on the top of the smoker, that constantly fail.

Hope this helped you and thanks for choosing FixYa.

Sep 20, 2011 | Masterbuilt 20070106 Electric Smoker

1 Answer

I'm concerned about having the proper extension cord. Just bought 15' light duty outdoor cord with 2 prong plug-SJOW/ 13 amps/ 25 volts/ 1625 watts. Is this sufficient for the # 20070910...


There should be a plate on the smoker that tells you how many amps/volts/watts it uses. If the values are lower than your extension cord I would try it, however make sure you feel the cord after the unit has been on for a bit, if it feels warm or hot to the touch, I would discontinue use of the extension cord.

If you are in need of a user manual you can find a downloadable (.pdf) version here.

http://www.masterbuilt.com/support.html

Aug 06, 2011 | Masterbuilt 20070106 Electric Smoker

1 Answer

We used the master built turkey fryer just once after we took turkey out it will not turn back on


That is usually a problem with placing the heating unit into the bracket correctly. If is isn't put in properly the unit won't even power on. You may need to take it off and on several times to get it right.

Jan 02, 2011 | Masterbuilt Turk-'N'-Surf's Turkey Fryer

1 Answer

Masterbuilt smoker model 20070910 with controller error code eaaf. email: pontoon5@windstream.net


Hi and welcome to FixYa, I am Kelly
It is telling you that the temp is below 40 degrees F. All you need to do is warm up the temp probe to 40F and it should work just fine. Use a hand held hair dryer or a warmed up shop vac on b.l.o.w to warm it up.

Happy New Year,
Kelly

Jan 01, 2011 | Masterbuilt 20070106 Electric Smoker

1 Answer

Plugged it and it didnt come on...i pushed the reset button too


That is usually a problem with placing the heating unit into the bracket correctly. If is isn't put in properly the unit won't even power on. You may need to take it off and on several times to get it right.

Nov 25, 2010 | Masterbuilt Turk-'N'-Surf's Turkey Fryer

1 Answer

No power


That is usually a problem with placing the heating unit into the bracket correctly. If is isn't put in properly the unit won't even power on. You may need to take it off and on several times to get it right.

Sep 26, 2010 | Masterbuilt Turk-'N'-Surf's Turkey Fryer

1 Answer

I purchased a masterbuilt smoker in Jan/2010 Model E 20070910. First time I used it had no problem with generating smoke but ever since I can not generate smoke I've tried pellets & even Hickory...


Try this...

I just bought a new Masterbuilt Smoker by default two weeks ago I borrowed a friend’s to smoke about 30lb. of Salmon to then can. Ran the smoker every day for three day. ON my last batch the heating element would not work. Talk about Frustrated! The Smoker was only 2 yrs. old.

Knowing I borrowed I felt I had to replace. So online to Cabelas and I ordered my buddy a new smoker and had it shipped. I then found this website... GOT TO LOVE the internet. I saw many other people had the same problem. Found an Answer...

The Problem was one of the connector to the heating element was poor quality and if you don't clean your smoker on a regular basis. The heat and moister caused the small copper connector to corrode and the wire to come loose. I took a wood chisel and cut off all the rivets on the back. I was then able to pull the back off with no damage and access the small box in the lower back. I found the connector. Went to the hardware store and bought a replacement for .75 cents. A pair of wire crimpers and the problem was fixed. I also bought ½ inch Sheet metal screws to secure the back it was good as new. So I returned the smoker to my buddy and kept the new one. When it arrived I saw Masterbuilt has since fixed the problem and provided an access panel to the element and connectors.

Mike in Alaska

PSU313@yahoo.com

Jun 17, 2010 | Masterbuilt 20070106 Electric Smoker

Not finding what you are looking for?
Masterbuilt Electric 30inch Smokehouse  Fast FREE FedEx Shipping! Logo

Related Topics:

277 people viewed this question

Ask a Question

Usually answered in minutes!

Top Masterbuilt Grilling Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Brad Brown

Level 3 Expert

16010 Answers

Paul Carew

Level 3 Expert

2557 Answers

Are you a Masterbuilt Grilling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...