Question about Washing Machines
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Modle AWO 9561 In the second
Hi from retired Englishman in SW France,
Whirlpool's 'FH' stands for 'no water inlet'. Presumably the second cycle is rinsing (?) and that requires cold water as opposed to hot for the first (wash) cycle.
If you have checked that the hot and cold water taps are turned on fully and the hoses are not kinked or squashed at the back, it is worth while checking both the hot and cold water inlet filters. Turn the taps off and remove both hoses at the washer end. Inside each inlet port there is normally a little filter which should just slide out. Clean if necessary and replace each one and the hoses. If after turning the taps back on there is no improvement, the problem is symptomatic of a malfunctioning hot or cold water control valve. Sorry but it needs a service call and a check that it isn't the control PCB ;-0(
If this has assisted you please consider a 4 thumbs up for the rating.
Thanks and good luck,
Posted on Aug 17, 2011
Tips for a great answer:
Aug 25, 2015 | Whirlpool Washing Machines
Feb 06, 2013 | Washing Machines
Nov 11, 2011 | Washing Machines
Aug 17, 2011 | Whirlpool Washing Machines
Dec 29, 2010 | Washing Machines
Dec 09, 2010 | Washing Machines
Apr 01, 2010 | Whirlpool Washing Machines
Feb 05, 2010 | Washing Machines
Jul 13, 2017 | Whirlpool Washing Machines
Nov 18, 2017 | LG Washing Machines
62 people viewed this question
Usually answered in minutes!