Question about Denon AVR-1603 Receiver

Open Question

I am not able to turn on denon 1603 receiver without remote, it is there on a stand by mode

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

tech48
  • 624 Answers

SOURCE: Denon AVR 1603 goes to stand by mode

It has a blown channel, unless you are good at repairing them I suggest an authorized Denon service center. This Denon not only needs the shorted output transistors replaced, but a few resistors, a couple of driver transistors and a capacitor on the preamp board as well. alot of parts to be replaced. I have repaired about a hundred of these over the last few years and my shop charges about $200 for this repair, other shops should be about the same.

Posted on Jun 17, 2008

marsrover
  • 682 Answers

SOURCE: Denon AVR-1707 Receiver - remote stopped working

please apply a new fresh battery to it-confirm from right orientation(polarity)-try to apply a contact cleaner spray over the bad button and press it many times.-remove any thing between remote and receiver.-you can use universal remote and confirm befor you buy the new remote that it support your receiver.

Posted on Jul 12, 2008

  • 93 Answers

SOURCE: Denon RC-978 remote... every button shuts receiver off

Drop the front panel of your receiver,there is ZONE 2 ON/OFF switch.
Good day!
solutiondoct

Posted on Nov 06, 2008

  • 1 Answer

SOURCE: I have a Denon AVR-1603 Receiver and Direct TV

Did you ever figure out how to do this? I have a Denon avr-1803, and also cannot control the volume from my Direct TV remote using the codes listed on the Direct TV system. Thanks for sharing any information you have found.

Posted on Jul 21, 2010

dunnbiker
  • 8546 Answers

SOURCE: When I turn on my denon 3200 receiver it keeps

Generally speaking, an amp protects itself from heat, shorts and overloads by refusing to turn on or stay on.


Overloads can be from excessive periods of high output and shorts would be wiring issues or a speaker blowing up.


You should be able to feel if it's hot. WHY is it overheating? Make sure it has sufficient ventilation on all sides and that vent holes are not blocked by dust balls. Ensure the fan (if equipped) is running as designed (some only operate on demand). Clean dust and debris from it.


If the amp comes back on after cooling, you're lucky. They only have so many self-protection cycles in their lives so continuously resetting or cycling their power without addressing the cause can do more harm than good.


If it protects immediately on a cool power up you should disconnect the speaker connections and try it 'naked'. If it comes up then diagnose which lead(s) are shorted. If it does not come up the problem is internal and should be left to an experienced hands-on tech.

Posted on Feb 16, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Denon AVR1603 RESET


Starzy, to reset on a Denon AVR-1603
  • power off the unit using the front panel Pwr switch
  • press and hold SPEAKER A and B buttons;
  • keep pressing on the speaker buttons, switch on the AVR
  • when the display is blinking release buttons Check the attached links,instruction and guides, Good luck
    "I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
http://www.avsforum.com/forum/90-receivers-amps-processors/1386123-help-denon-avr-1603-shuts-down.html
Denon AVR 1603 Operating Instructions Manual Last Function Memory...

Jul 24, 2016 | Denon Audio Players & Recorders

1 Answer

How can i run speaker test tone without a remote for a Denon avr 3200


The setup mode can only be entered using the remote on this model of Denon receiver

Mar 10, 2012 | Denon AVR-3200 Receiver

1 Answer

Hooked up the subwoofer and it doesnt work at all is the a subwoofer on and off button for this receiver


No, you have to follow the procedures in the manual to inform the unit that there is a subwoofer, then select some parameters on how it is used depending on the functional sizes of your other speakers.

http://www.retrevo.com/s/Denon-AVR-1603-Receivers-review-manual/id/363bh846/t/1-2/

Page 10

Aug 16, 2010 | Denon AVR-1603 Receiver

1 Answer

Two front channels don't work, speakers and wires


First of all please check the mode in which you are operating. Use the tester to see if there is tone on the speakers. Use a good DTS source and swtich over to 5.1 to check for requrired levels. If there is no sound yet, please open the cover and check for the connections to the front channels, check if the relay is clicking. You will have to look into the output mosfets for damage. for this the main board has to be accessed. If you think that you are not able to go deeper into find out the nearest Denon service centre. many such centres do not accept a set if tampered and so you need to be careful not to make it more costly. Hope my advice helps. Good day

Jul 06, 2010 | Denon AVR-1603 Receiver

1 Answer

Hi, I'd like to use my Denon at overseas where


There should be a switch that you could set to the various voltages. Normally a round switch in one of the corners on the rear panel that you can turn with a flat screwdriver

Aug 02, 2009 | Denon AVR-687

1 Answer

Denon RC-980 subsitute remote for Denon AVR-3200


I have a remote left over from my denon ACR3200. the remote is RC-825. It is currently listed on Ebay.

Dec 24, 2008 | Audio Players & Recorders

1 Answer

Vinyl on Turntable sounds thin and trebley through Denon AVR-1603


You will need an adapter amp which converts the tiny tiny signal from a magnetic phono cartridge up to the line level that you need to feed into your AUX input jacks. They cost about $20 to $30 dollars and can be found at Radio Shack. Unless of course you have a phono input jack on the back of your Denon unit. Good luck.

Nov 26, 2008 | Denon AVR-1603 Receiver

1 Answer

Denon AVR 1603 goes to stand by mode


It has a blown channel, unless you are good at repairing them I suggest an authorized Denon service center. This Denon not only needs the shorted output transistors replaced, but a few resistors, a couple of driver transistors and a capacitor on the preamp board as well. alot of parts to be replaced. I have repaired about a hundred of these over the last few years and my shop charges about $200 for this repair, other shops should be about the same.

May 24, 2008 | Denon AVR-1603 Receiver

Not finding what you are looking for?
Denon AVR-1603 Receiver Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top Denon Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5017 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

The Knight
The Knight

Level 3 Expert

73635 Answers

Are you a Denon Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...