Question about McCulloch Garden

Open Question

Manual McCulloch chainsaw MacCat 83 dBA - McCulloch Garden

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

steve_lima
  • 181 Answers

SOURCE: I would like to know how to adjust the carburator of McCulloch 3516 chainsaw 35cc/cm 46759-77

the carbuator has two 2 adjusting screws on it.one is high side and the other is low side.start by turnig them both in until they touch bottom.now turn them both out 1 1/2 turns.this should start and run saw.throttle saw up to full throttle and adjust high side in until you get the best RPM out of saw.do not adjust high side any less then 7/8 turn out from bottom.if you do you will burn saw up from to lean burn.once the high sie is set now adjust low side until the saw will idle by it's self.let me know if this helped you.......

Posted on Jun 01, 2009

dontbother10
  • 2220 Answers

SOURCE: looking for a manual for mcculloch pm 484

If the ignition and fuel supply systems are good that is correct. I was not able to find a McCulloch 484. Are you sure that is the model number?
Lou

Posted on Dec 19, 2009

dontbother10
  • 2220 Answers

SOURCE: Mcculloch chainsaw. Model 2116av. Primer bulb is

Hello Jeff;
Your saw is listed here:
McCulloch MTD
Chainsaws 32cc-35cc-38cc Anti-Vibe
The IPL (exploded parts list) for your saw is the only detail for fuel line routing and it is sketchy at best; components are listed but may be on different illustrations. The primer is displayed but not listed, and there is no part number. Before you get to deep please contact OrderTree.
http://www.ordertree.com/cms/parts-lookup-help/73.html


Use the IPL as a guide for disassembly/reassembly.
This is typical routing and a couple of hints.
http://www.fixya.com/support/r3706813-2_cycle_fuel_system_repair

OMs for McCulloch are tough. harder than replacing the fuel line. Have your saw within easy reach they will want the serial number and a few other things.
Operators Manuals: are much more difficult. I have dialed this number many times (Contact Us - All McCulloch Products 1 (800) 521-8559) and have yet to get a satisfactory response. Please try this! If enough of us try they will fix it! If unsuccessful with McCulloch try here:
Beg for manuals thread (ArboristSite - free to join). Please use the search function first, it has probably been asked and answered.
http://www.arboristsite.com/showthread.php?t=72322
Good luck with your project. HTH
Lou

Posted on Feb 20, 2010

dontbother10
  • 2220 Answers

SOURCE: I am trying to obtain a copy of McCulloch 338 Chainsaw Manual

McCulloch Manuals
Illustrated Parts Lists: (IPLs) are fairly simple, on the underside of McCulloch saws is a black and yellow tag; the upper number (“Power Mac 320” 600021H) is the model, below it a serial number (11-18555). These 2 numbers are combined to create an IPL number (“Power Mac 320” IPL number = 11-600021H). The IPL number can be used to find the correct IPL for every McCulloch parts supplier I have found. If the parts supplier only list part numbers the proper IPL is the source for the part number.
Operators Manuals: are much more difficult. I have dialed this number many times (Contact Us - All McCulloch Products 1 (800) 521-8559) and have yet to get a satisfactory response. Please try this! If enough of us try they will fix it! If unsuccessful with McCulloch try here:
Beg for manuals thread (ArboristSite - free to join). Please use the search function first, it has probably been asked and answered.
http://www.arboristsite.com/showthread.php?t=72322
Include your e-mail address in your request.

Posted on Apr 09, 2010

  • 1 Answer

SOURCE: NEED INSTRUCTION MANUAL FOR MCCULLOCH 838 AS CHAINSAW

Found it at
http://www.mcculloch.biz/int/support/owners-manuals/?query=MAC+838&types=O

Posted on Apr 16, 2010

Testimonial: "Thanks exactly what i was after,thanks again."

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need to know carb mixture


fuel mixture for 2 stroke' s is 20:1

100ml of oil in 5L of fuel

Mar 13, 2015 | Oregon McCulloch 12" Chain Saw Repl. Chain...

1 Answer

What size chain do I need for a McCullough MacCat CS38?


Chains have three requirements...pitch, guage and number of links. The pitch is the distance on center between chain links, the guage will be one of three, .043, .050 or .063. To get the number of links, you have to count each link and spacer. If you are missing the chain, you may have to take the saw to a service center and have them tell you.

Sep 27, 2014 | McCulloch Garden

1 Answer

I have a Mcculloch 16in maccat 35cc chain saw


Does the chain turn freely by hand? Is it being oiled properly? Check the fuel filter, air cleaner, and muffler for plugging. Does 'feathering' the choke make any difference? If it helps, try turning the H jet needle CCW about 1/4 turn which should make it run more rich and 4-stroke until you are cutting which should immediately cause the engine to 2-stroke. Hope some of this helps!

Jul 21, 2010 | McCulloch Garden

1 Answer

I need to know a fuel oil ratio.


Regardless of what the manual says once adjusted your saw will perform better with this mix.
Do you need bar oil? Available at any Hardware or Home Center.
Fuel/Oil Mixture
  1. Use a quality 2 cycle oil and mix it to the OIL suppliers recommended ratio. Today I use Stihl 2 cycle oil mixed @ 50:1 in a Pioneer that I purchased new in 1980. There are no gouges or scratches on the piston or cylinder and I have no carbon build up on the piston top. The manual (on stone tablets) recommends 24:1. Over the years the mixture has leaned from 24:1 (Saw Recommendation) to 28:1 (Lawn boy mower recommendation) to 32:1 (Oil provider 2gal premium/8oz chainsaw 2-cycle engine oil - used for many years) and finally the last 5 (±) years 50:1 (1gal premium/2.6oz Stihl 2-cycle engine oil)
  2. Any fuel containing ethanol is not good with chainsaws. Mix what you expect to use within a few weeks. Anything over 1.5 months old use up in a 4 cycle engine. HTH
Lou

Dec 27, 2009 | McCulloch 16 In 4.5 Hp Electric Chainsaw...

1 Answer

User manial for maccat 338 chain saw sought to download


ArboristSite dot com manuals thread under chainsaw. Lou

Sep 01, 2009 | McCulloch Garden

Not finding what you are looking for?
Garden Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top McCulloch Garden Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Roland W VanLue
Roland W VanLue

Level 3 Expert

486 Answers

roeb

Level 3 Expert

401 Answers

Are you a McCulloch Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...