Question about Weller Pes51 50watt Soldering Pencil

1 Answer

Need a wire diagram for Weller Pes51 50watt Soldering Pencil

My dog pulled the wires out and i need help finding witch wire goes where I've looked online and cant find anything

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Http://ptsunow.wordpress.com/2011/06/13/weller-bp860mp-removing-the-button/ I hope this helps

Posted on Apr 25, 2013

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 33 Answers

SOURCE: I have a Weller 1002B soldering station. Haven't

Hi, I'm not sure the tip is defective. Check that the tip is screwed in tight. If it is not good and tight the tip will not get a good heat transfer from the solder wand. Hope this helps. If the wand will heat then the tip should.

Posted on Aug 30, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need a wiring diagram for the trigger mechanism for a POWER-CRAFT soldering gun model 84 TWL 6091A.


You need this part: Weller 7324 Switch for Dual Heat Model 8200, D550 and D650 Soldering Guns That will repair the unit. Wire diagram is inconsequential .

May 18, 2016 | Welding Tools

1 Answer

I have an old Weller soldering iron model 8250a that I would like to repair. It has burnt up wiring, and I'd like to find a wiring circuit diagram, schematic or ANY kind of electrical drawing, comple



These were very simple and sturdy soldering guns [I still have 5 or 6 of them in various sizes] They basically have a transformer wired so that the heating part is basically a short circuit of the large low voltage secondary winding [very low voltage] and because the tip is higher resistance than the rest of the heat producing end, it gets hotter sooner. The secondary is just a single loop of the tube that holds the tip. Usually the only maintenance is to loosen and re-tighten the tip mounting nuts so that there is a good electrical connection [no connection = no heat; poor connection = poor heat]
There may be another small secondary winding that provides power to the light but I think the older ones just attached the lighting wires to the large secondary.
The primary [line voltage] winding of the transformer is switched such that the higher wattage powers the lesser resistance part of the winding and the lower wattage powers the higher resistance part of the same winding. In other words there is a single wire for the primary that has a tap near one end of the winding for dual heat.
If the two windings to the switch are mixed up the higher heat will just be at a different trigger position; if you don't like it, switch them around.

Also check the connection to the non-switched wire from the cord for a good connection. The switches are still available, at least for the newer models; do a google search for
Weller soldering gun switch
or
Weller 7324
25409080-sdtuz4uzlvmm4ye1kcvubb3h-1-0.jpg
Untitled Document [for a switch supplier]

Weller Switch Dual Heat Gun 1 Each 7324

Feb 10, 2015 | Weller Welding Tools

1 Answer

Is there good operating instructions, or manual for Weller 8200 N 100/140 watts gun?


There are normally three of the same type. They are consumable, you don't need to stock all the different types - just buy the one you need for your current project.

Note, these are high power and were commonly used for soldering wires in the point-to-point wiring used in old tube electronics. Do not use this on a Printed circuit board - it will damage any silicon component.

Use a a soldering pencil for printed circuit boards.

May 16, 2014 | Weller 8200 Soldering Gun

1 Answer

Logitech headset usb wiring diagram?


Is this what you are looking for?

Jul 10, 2012 | Logitech USB HEADSET H390

1 Answer

My Weller WMRP soldering pencil has become intermitent, is ther any way to open and look for broken solderings in it?


The problem is caused by the ceramic heating element built into the iron, it becomes intermittent over time and cannot be accessed.

Feb 24, 2012 | Welding Tools

1 Answer

When i plug it in it goes to 902 degress but does not get hot and when i turn the heat down it goes up to 902


I had the same problem with mine. Try pushing or twisting the cord entering the soldering iron pencil. The temperature sensor can become disconnected if the cord gets twisted.

Feb 20, 2011 | Weller Wesd51 Digital Soldering Iron...

1 Answer

How do i solder together some headphone wires?


1- pull the trigger and melt some solder onto the tip then release the trigger.
2- hold all the wires together.
3- touch the tip to the wires and pull the trigger. when the solder on the tip melts again it will flow onto the wires

Jan 16, 2010 | Weller 8200 Soldering Gun

1 Answer

Repair wiring on weller soldering iron model ec1002


If the coil wire is snaped then you will need to replace all the coil. usually the power from the outlet goes stright to the coil and connects to both ends of it's windings

Mar 27, 2009 | Cooper Industries Weller Field Soldering...

1 Answer

Rewireing a handle


black goes to gold white to silver well guess you know where green goes now

Jan 04, 2009 | Weller TC201T: Soldering Iron For Wtcpt,...

Not finding what you are looking for?
Weller Pes51 50watt Soldering Pencil Logo

662 people viewed this question

Ask a Question

Usually answered in minutes!

Top Weller Welding Tools Experts

Cindy Wells

Level 3 Expert

5161 Answers

Lawrence Oravetz

Level 3 Expert

9742 Answers

Mike

Level 3 Expert

4340 Answers

Are you a Weller Welding Tool Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...