I drive an N reg bmw 316i and during the exteme cold spell the car radio stopped working. The word code appeared in the digital display. I entered a wrong code and now there are 4 dashes (----) on display. I wonder if you know how I can get the code message to reappear because I have been told the correct tode to enter.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Blaupunkt radio's are kind of funny when it comes to different vehicle say a BMW or Renault or some of them have to start with a 1 or a 0 or just a standard Blaupunkt. In any case I ran it for a BMW, a Renault, a standard and the kind that has to begin with a 1 or a 0. I came up with 3 different codes. They are 9742, 1742 and 6237. Hope one of them work for you. This is new decode software I use for my business that I just purchased and has worked 100 percent on Ford radios but this is the first Blaupunkt I have ran it for so I am curious as to if it worked or not so if you wouldn't mind letting me know either way by replying/commenting here or feel free to email me directly at email@example.com I would appreciate it. Also if you have a Citreon codes are different as well as some mercedes and I would have to run it through a little different on this software. So the same apply's if you need me to run it through a different way and don't mind doing it. I really hope one of those work for you though...
The radios in a BMW are made by different manufacturers (ALPINE, BLAUPUNKT,PHILIPS ,BECKER ,PIONEER ,CLARION etc) so you will have to identify your radio manufacturer.(identified with label on the casing)
The Code Entry Instructions are dependent on which make + model of radio.
Once identified , then look up the instructions here on this free website
yes , there is an internal amp that will need to be replaced , but will also need to be tested for any other components on the amp that may have caused it to fail , unless you were just cranking it up, then the amp just burnt out and will need replacement