Question about HP OfficeJet 6110 All-In-One InkJet Printer

1 Answer

Does not allow me to connect to pc/printer

I have tried to down load the correct drive to operate the printer but i have no success because there seems to be no connection between pc and the printer, i have tried different cables but still no results.
The down loads i need is for HP 6110 office inkjet all in one
Please help

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 97 Answers

Hi, 


try this, download the software and save it on ur computer and run the software, it would extract the software and  follow the steps below, 
START>>RUN
in the RUN window type %temp%,  u would find a folder starting with 7z...... open that, u would find a folder called SETUP open that  then u would fine a folder called UTIL then CCC the u would find a file called UTIL L4,  double click on it and wait until it complete the setup and try once after it completes, restart the computer. 
reinstall the software, it should work.


Regards,  raj_p5983

Posted on Jan 20, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need to know if the Canon Pixma mg2520 will operate or communicate with a Windows 10 operating system?


you will have to connect it correctly and use the driver disc to install it into the computer
if you don't have the disc then down load the drive from the net

Apr 28, 2016 | Canon Office Equipment & Supplies

1 Answer

How do you connect wireless printer cannon 495?


You can down load as well as put in the particular drivers for the printer in the Canon UNITED STATES web site to run the particular printer wirelessly. To achieve this, you need to adhere to the particular measures down below:
1. Push the particular Upkeep key (looks just like a set of pliers and a screwdriver) about the printer frequently before the symbolic representation in which looks like "G" looks inside the LCD, then media the particular <COLOR> key help the particular wireless LAN functionality with the printer.
2. In the event the wireless LAN continues to be allowed, we all will want to down load the particular drivers in the Canon UNITED STATES web site. This website link will need you to your initial down load web site for ones PIXMA MP495:
PIXMA MP495 Individuals as well as Application web site
After about the preliminary down load web site for ones type, you need to accomplish the next:
1. Confirm that this operating system recognized inside the "OPERATING SYSTEM" drop-down menu can be appropriate, as well as if it's not, you need to click the drop-down menu to pick out your operating system.
3. Up coming, you need to go through the red-colored arrow next to the particular "DRIVERS" part as well as click the MP INDIVIDUALS file. When you accomplish, an additional web site look supplying details of the particular file you happen to be planning to down load look.
3. You should scroll lower about the Information web site as well as agree to the particular terms with the please note message to keep with the down load course of action simply by exploring the particular "I AGREE : START OFF DOWNLOAD" key. Immediately after clicking the particular "I AGREE : START OFF DOWNLOAD" key, adhere to the particular directions to down load as well as put in the particular driver. The time for the down load course of action can vary greatly according to the rate of your Internet connection as well as the length of the particular file staying down loaded. You should be sure you have the UNIVERSAL SERIES BUS cable tv unplugged in the laptop or computer prior to installing the particular drivers; the particular setting up plan can induce you to select that within at the appropriate time.
In the event the drivers are usually down loaded as well as mounted, you need to reboot your personal computer, and you should be ready for success to print.

Canon PIXMA MX495 Driver Download Review Install

May 05, 2014 | Canon PIXMA MP160 All-In-One InkJet...

1 Answer

Emachine EL1852 keep on restarting


Hi,
Does it load operating system fully before restarting?If it does,run a full scan of the drive with an updated anti-virus.
If not,do a reboot[enslave] of your hard disk from another computer.This is how to:-
Remove the hard disk from your machine.
Disconnect CD/DVD ROM from machine 2 and connect your hard drive.
Start the machine.'You're trying to run Unix' alert comes on, press f1[ save changes].
A disk check operation starts.This repairs the operating system on your hard disk.
After successful loading operating system of machine2,turn it off and remove your drive.
Fix it on your machine and start it.

Hope this helps.Thanks!

Sep 27, 2011 | E-Machines eMachines Desktop PC

2 Answers

I want to install my printer hp deskjet 2460 to my notebook windows xp so that i can print


first insert the CD which comes with your printer in CD Rom drive. it will autoplay and indicate you what to do. With its indication install the software. also in a specific time it will say you to connect the printer and power on. Do the same. after a while your printer will be installed successfully.
thank you

Aug 30, 2011 | Computers & Internet

1 Answer

Unable to print from imac even it had been installed successful and the green line showing on wi


Try to print the wireless network settings page on your Lexmark X4650 to determine if your printer is still registered in your wireless network. 1. Press Setup (pattlnk_632008_2048-x4650stup.jpg) on the printer operator panel. 2. Press the right or left arrow button until Network Setup is displayed, and then press(pattlnk_632008_2052-x4650ok.jpg). 3. Press pattlnk_632008_2052-x4650ok.jpg at Print Setup Page. 4. Press pattlnk_632008_2052-x4650ok.jpg when prompted to Load Paper. 5. Press pattlnk_632008_2052-x4650ok.jpg. The network settings page will now print.
Check the IP Address and the SSID (network name).
A quick fix for most communication errors can be achieved by resetting the printer and/or rebooting the PC. Frequently, issues are caused simply by a break in the signal sent from PC to printer or vice versa. Unplugging and re-plugging the printer allows the small amount of on-board memory on the printer to be cleared, with the result that the PC recognizes the machine properly. Programs continuing to run in the background of the operating system (OS) can cause the signal to be lost. Rebooting the PC ends all programs that may be running and makes a 'clean' start, allowing the signal to be detected.

May 09, 2011 | Lexmark X4650 InkJet Printer

1 Answer

I'm trying to scan to my computer & I'm getting a msg "No connection. Turn on or connect comp. or install HP software." I am connected to the printer. Can you help?


First step for ANY HP product is to first power it down completely, which means disconnect all of the cables from it, usb, printer, power supply, etc., and let it sit for a minute or two. This will usually allow the printer to reset its processor upon powering up.
If your PC does not recognize it at that time then I would suggest re-loading the drivers that work with your operating system.
After that all I can suggest is that there is a bad usb port, or whichever connection is being used...

Nov 20, 2010 | HP PSC 950 All-In-One InkJet Printer

1 Answer

My computer keeps on restarting everytime I connect a USB device like, flash drive, printer etc. I tried restarting my computer, then when everything's done loading, i connected a flash driver and after a...


I would reinstall xp OS... you should be able to do a restore without loosing any of your own files. After an os restore you may have to reinstall a few programs but your data files should be ok if you do the correct type of install.

Sep 22, 2010 | Microsoft Windows XP Professional

1 Answer

Have changed cartridges, now won't print


First, run a self test on your printer to determine its status ok. This doesn't need any connection to the pc. Just to help narrow down the suspect. If that proves ok, then the problem is either your USB cable or the drivers/software loaded unto the pc. Try a flash drive on the connector/port to which the printer is attached on the pc and note the result. if ok that leaves the suspects to cable or drivers. I recommend here that you uninstall the drivers and get them re-installed with the cd that came with the printer. Do just this: detach your printer from the pc and load the drivers. You are allowed to connect the printer to your pc when prompted ok. That way you know that there's communication b/w the devices. If nothing still happens after all this, then, its time to change your USB cable. Good luck

Apr 28, 2009 | Epson Stylus CX3200 All-In-One InkJet...

1 Answer

PC shuts down when c-770 is conected via USB


Try NOT connecting your camera to your computer.


The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.


Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program such as Picasa.

Dec 29, 2008 | Olympus Camedia C-770 Digital Camera

3 Answers

PRINTING PROBLEM WITH CANON IP1880


Shut the printer off. Than unplug it's power. Than unplug the USB/data cable. Wait about ten minutes. Allowing printer to reset it's self. Go to pg. 37 of your manual & follow instrctions for cleaning. Connect the power cable, the usb/data cable & turn on the printer. Test printer for error paper jam (light/display message). Canon's web site for drivers, updates, software & guides. PIXMA IP1880 is the iP1800 series.
When web sites loades you must choose your operating system from the drop-down menue.
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=357&modelid=14991
Problem not corrected? Uninstall printer software. Re-start PC. Re-install software. Re-start PC & re-test.
Hopefully you will not need to uninstall & reinstall.

Feb 11, 2008 | Office Equipment & Supplies

Not finding what you are looking for?
HP OfficeJet 6110 All-In-One InkJet Printer Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Vinaya Kumar...
Vinaya Kumar...

Level 3 Expert

1121 Answers

Seeker5211
Seeker5211

Level 3 Expert

1088 Answers

kakima

Level 3 Expert

98921 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...