Question about Televison & Video

Open Question

How do a tune a Technika DV3T TV to pick up a digital signal to receive Freeview in the UK?

I would like to tune a Technika DV3T TV to pick up a digital signal to receive Freeview in the UK and would like to know how to do this using the controls on the TV or using the remote control.

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

dodgecharger
  • 254 Answers

SOURCE: tuning in my orion tv

Do you just mean to select channels, or do you need to have it search for active channels (programming mode)? If just select channels, then most remotes have channel up & down buttons, in addition to the number pad. To select by numbers, use 2 digits: 04, 06, 08, 10, 22 and so forth.

If the set needs to be placed in the setup or autoprogram mode to search for active channels, then the menu functions must be used.

You may be able to find an online manual on Orion's website. Use your TV model number.

Posted on Jan 08, 2008

  • 1 Answer

SOURCE: Panasonic DVD Recorder - Digital tuner stopped working

Is your recorder hooked up to the new convert box for digital antenna reception?
I am currently researching the convert boxes for my dvd recorder. I found that some dvd recorders already have digital converter boxes already installed. This might be the case for you.

Posted on Sep 28, 2008

muttandjeff
  • 359 Answers

SOURCE: TV DOES NOT RECEIVE THE SIGNAL FROM REMOTE CONTROL

radio shack used to sell the box dont know for sure if they still do

Posted on Feb 06, 2009

Sailorm0on
  • 61 Answers

SOURCE: CANT TURN TV OVER USING REMOTE CONTROL

Hi, use another set of batteries.

Posted on May 15, 2009

  • 1 Answer

SOURCE: Unable to tune my LG Electronics Digital TV (Model 37LC2d-ec) to receive digital channels (have tried auto and manual program). TV will only receive basic standard channels. TV bought in Uk - now livi

My LG plasma TV 50pc3d when power-on only see vertical bars. what 's going on. please help. Thank you

Posted on Jul 22, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi have a built in freeview alba tv tune in channels working fine but dont have any bbc or c4 c5 any one can help me or send tv back


Can't tune Alba LCDW16HDF :( - Freeview - Digital Spy Forums

forums.digitalspy.co.uk/showthread.php?t=1238173

Digital Spy
Apr 1, 2010 - 17 posts - ‎8 authors
No matter what the problem DS Forum posters will always provide an answer ... That the Alba is your only digital television receiver - you don't have another ... I suspect the set may have found Craigkelly's BBC & ITV/C4/C5 ... BBC Three questions? - Broadcasting
25 posts
Dec 13, 2015
Why dont RTE do this - Page 2 - Broadcasting
25 posts
Aug 21, 2015
Channel 4 Licence Renewal and Scotland - Broadcasting
19 posts
Mar 12, 2014
Why Won't Freesat/BBC let Viewers Nationwide have ...
25 posts
Jan 20, 2014
More results from forums.digitalspy.co.uk

Freeview Help: Missing Freeview Channels - Radio and Telly


Jan 01, 2016 | Alba Televison & Video

1 Answer

I was given a technika hd ready dvbt dvd built in freeview with no instructions.I need instructions how to tune in freeview.It had previously had the freeview tuned in but now the channels are not...


hi,
First of you have to check the Atenna connection in the rare of your tv. Check for any loose contact on the connection of the wire to the pin. may be its the cause for showing signal as 0%. you can confirm the same by connecting the tv at the place where you doughters tv is connected. If there you get the picture then there is some thing wrong with the atenna connection.

If want information how to tune your tv then need information like BRAND and MODEL NUMBER of you TV.
ok

Aug 05, 2011 | Televison & Video

1 Answer

I have a brand new technika tv 216/54g. It has freeview built in. I have a brand new indoor digital amplified aerial also technika but I cant get it to pick up any stations. Do I need anything else? please...


Hi there,

You don't necessarily need anything else, but you may not have a strong enough signal to pick up the digital/freeview channels using an indoor aerial. It could also be that the indoor aerial is not correctly aligned.

If the signal strength is lower than approx. 50%, the TV may detect them during the automatic channel scan but it wont store them. When the signal strength for any digital channel is 50% or lower it's more or less unwatchable - the picture would be constantly breaking-up or freezing and the audio drops out continually. Trying to scan for channels using an indoor aerial is rather hit and miss. Numerous attempts may be necessary before you get any channels.

Assuming you have a roof aerial, it is far easier to temporarily connect the TV to a fixed aerial point while you run the automatic channel scan. The TV will store all the channels and you can then move it to it's permanent location and connect the indoor aerial. You can then adjust the indoor aerial with the channels already stored until you find a location for the aerial where you have a good signal.

Doing it this way also eliminates the possibility of a fault with the TV and confirms that you are performing the channel scan correctly. If the TV is connected to a fixed aerial point and you are still unable to receive or store any channels, then it's likely that you are performing the channel scan incorrectly or there is a fault with the TV.

Please try scanning your channels using a known working fixed aerial point. If you are still unable
to receive any channels - or you don't have any fixed aerial points - please post back for further assistance.

Hope this helps.

Regards,
BElectric

Feb 28, 2011 | Televison & Video

6 Answers

Technika TV Tuning Problems


hi the same happened to mine. a22inch freeview dvd.wont pick up a signal when tuning in.Its had very little use ( 150hrs ish) as its in our caravan. we now plug in a separate freeview box via the scart.Tesco dont want to know as it was 3months out of warranty at the time of complaint.Anyway Im meeting Tesco in County court in july. It appears to be a common fault

May 13, 2010 | Televison & Video

1 Answer

Retuned my Freeview receiver but now have black bars.


The retuning process is as follows:

  1. Press the [i+] or MENU button on the remote control to display the DIGITAL INFO menu.
  2. Press the BLUE button to display the MAIN MENU.
  3. Press the UP or DOWN buttons to highlight AUTO TUNING then press the OK button to display the AUTO TUNING MENU.
  4. Press the RED button to start the auto tuning process for all available digital channels.
  5. Wait for the process to complete.

If you wish to CANCEL the auto tuning process whilst it is processing then press the BLUE button at any time.

You may lose some channels when you retune the TV as the channels have been rearranged. To locate them look at the EPG although you may still find that some channels are no longer available on FREEVIEW. See the following link for additional information

http://www.freeview.co.uk/_retuneinfo/

If the above process does not work then check the link above for additional information and also visit the accompanying site links below to find more information for your model of TV / FREEVIEW box.

For troubleshooting the retune procedure visit http://tvretune.co.uk/troubleshooting/

For specific model information visit http://tvretune.co.uk/productmanuals/

Oct 01, 2009 | Sony BRAVIA KDL-40V4000E 40 in. LCD TV

2 Answers

RE-TUNED Mikomi LCD15796BF Freeview tv on 30


Buy a digital antena or have roof antena,get better receptions and stable Hz.Rescan when get better signal should get it back an it stable's.

Sep 30, 2009 | Westinghouse LTV-27w7 7 in. LCD HDTV

4 Answers

I have a technika lcd19dvdid307 tv and a universal remote. How do O re tune for new digital channels? I have lost the original remote. Thank you, kellyanne


I think the point he is making is that he only has a universal remote - not the original, so the problem isn't not being able to find the channels, but not being able to select the retune option in the first place. I have same problem - the remotes that shipped with this TV were rubbish (I have gone through 2!) and some buttons stop working. The retune / setup memu is seperate to the other basic set-up stuff and many universal remotes don't have theis 'other' button. Best solution, get a replacement remote that is MADE to work with this TV then you can auto-tune to your hearts content.

Sep 11, 2009 | Insignia NS-LCD19 19 in. LCD TV

2 Answers

Cannot tune my technika tv due to a child lock?


have you tried to put in 0000 or 1234, this usually comes from the factory, unless to have put one in yourself.

Mar 25, 2009 | Televison & Video

3 Answers

Ive just been given a Technika television LCD19DVDID 308 and I can't find out how to watch analogue channels,can anyone help me please?


have fitted a new aerial as tv was connected to sky and now cant get any freeview channels keeps saying no signal what am i doing wrong

Mar 16, 2009 | Sampo PME-50X7 50 in. HD-Ready Plasma...

2 Answers

Sound problem on Technika LCD19-907


The retuning process is as follows:

  1. Press the [i+] or MENU button on the remote control to display the DIGITAL INFO menu.
  2. Press the BLUE button to display the MAIN MENU.
  3. Press the UP or DOWN buttons to highlight AUTO TUNING then press the OK button to display the AUTO TUNING MENU.
  4. Press the RED button to start the auto tuning process for all available digital channels.
  5. Wait for the process to complete.

If you wish to CANCEL the auto tuning process whilst it is processing then press the BLUE button at any time.

You may lose some channels when you retune the TV as the channels have been rearranged. To locate them look at the EPG although you may still find that some channels are no longer available on FREEVIEW. See the following link for additional information

http://www.freeview.co.uk/_retuneinfo/

If the above process does not work then check the link above for additional information and also visit the accompanying site links below to find more information for your model of TV / FREEVIEW box.

For troubleshooting the retune procedure visit http://tvretune.co.uk/troubleshooting/

For specific model information visit http://tvretune.co.uk/productmanuals/

Jun 19, 2008 | Sony KDF-E60A20 60 in. LCD HDTV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

85 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74136 Answers

Cindy Wells

Level 3 Expert

5102 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...