Question about Radio Shack Pro-96 Scanner

1 Answer

How do I unlock a channel that I previously locked out on accident by hitting the wrong button and how do i see the locked out channels

Posted by on

  • sascia23 Jan 31, 2009

    How to unlock all locked out channels at once

  • Rick Byrd
    Rick Byrd May 11, 2010

    while manually going thru the channels when you see a channel that displays the L/O icon press the L/O button to unlock that channel . to manually go thru the channels , press manual > press 1 > press enter , that should put you at channel 1 , press the manual or up button from there to scroll thru all channels manually while observing if there is a L/O icon on all of them , to unlock all locked channels at once , turn off radio , press and hold L/O and turn radio back on , all channels are unlocked .
    J5

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 120 Answers

Go to the channel by pressing manual,then the channel number,then manual again,then press LO or lockout, and scan

Posted on Jan 31, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I unlock my scanner?


Channel Lockout You can lock out a channel so it is not scanned. Channel Lockout does not erase the frequency from the channel. You can lock out up to 50 channels, including the Priority channel.
Lockout information is retained in the memory when the scanner is turned off.To Lock out a Channel
Example: Suppose you want to lock out Channel 2 because it stops on transmissions you don't want to hear.Press LOCKOUT when the scanner stops on Channel 2.The scanner locks out Channel 2, Then it immediately advances to the next channel that is not locked out, and resumes scanning.In the Manual mode, press LOCKOUT to lock out the displayed channel. Pressing LOCKOUT does not advance to the next channel in Manual mode.L/O appears in the display to indicate the displayed channel is locked out.Whenever you want to search for channels that are locked out, press MANUAL repeatedly to go through all 50 channels. If a channel is locked out, L/O
appears in the display.Restore a Locked Out Channel To unlock a channel so that it can be monitored during scanning:1. Press MANUAL repeatedly to find the locked out channel.2. Press LOCKOUT again to unlock the displayed channel. L/O no longer appears in the display.Restore All Locked Out Channel To unlock all channels, you must be in the Manual Mode.1. Press MANUAL.
2. Press and hold LOCKOUT to unlock all channels. The L/O indicator goes out on any channel previously locked out.

Sep 18, 2011 | Uniden BC248CLT Base Scanner

1 Answer

Dear Staff: I have a Pro. 97 hand held scanner. I


Hi, my name is John. Press the FUNC and hold down the L/O button until it beeps twice......hope this was helpful..Rate this solution on the four thumbs-up......John

Sep 08, 2010 | Radio Shack Pro-97 Handheld Scanner

2 Answers

Pro-96 Scanner: My pro 96 scanner says all channels locked and it ...


If there is no frequencies on your scanner it will lock all channels out. if all your frequencies are on one bank and you accidentally hit that bank number and turn it off it will lock out all channels. If that's the case just hit that bank no. back on and they will unlock.

May 17, 2010 | Radio Shack Pro-96 Scanner

1 Answer

How do I do a hard reset on my bc296?


I have accidently hit the wrong button on my scanner; how do i get back the bank with the fire channels which is bank 1?

Apr 07, 2010 | Uniden BC296D Handheld Scanner

1 Answer

Channel 6 is locked out...how do I unlock it


Hi you should be able to hit the manual button and take it to channel 6 and hit the unlock button

Jan 04, 2010 | Radio Shack Pro-2055 Base Scanner

5 Answers

Cannot unlock Uniden BC60XLT-1 (30 ch VERSION)


if all the channels are 000.000 then it wont scann youll have to hit manual then enter a freq then hit the "e" button. once you hit manual youll be able to push the up and down arrows to select an channel you wish to imput a feq. Hope this helps.
David

Jun 29, 2009 | Uniden BC60XLT Handheld Scanner

1 Answer

Turning off the l/o button and programming issues.


To restore a locked out channel press MANUAL then enter tha channel number then press MANUAL again, then press LO to unlock it. To restore all locked out channels press MANUAL and then press and hold LO for about two seconds until you hear two beeps from your scanner, then your frequencies have been unlocked.

Hope this helps!

May 25, 2008 | Uniden BC60XLT-1 Handheld Scanner

1 Answer

All channels locked out pro-2055


I hope this will help. It shows locking and unlocking ids while scanning and while in a bank.


Locking/Unlocking IDs Contents You can lock out IDs you don't want to hear such as telemetry, MDT's, dog catcher, etc. To Lock out an ID while scanning, quickly press L/OUT while the ID is displayed. To Lock or Unlock an ID manually: 1. In Manual mode select any channel of the bank you want to lock or unlock an ID in by entering the bank number and channel number (Ex: 001) then press MAN to advance to the channel. 2. Press PGM then TRUNK to put the scanner in program and trunk modes. You will see the bank number (0-9), list number (0-4), and the list status (ON or OFF) on the 1st line, the ID# in the list (0-29) on the 2nd line, the ID on the 3rd line, and bank tag on the 4th line (if programmed). 3. Press TRUNK (each time) to select the ID list (0-4). 4. Select the ID# (0-29) by pressing up.jpg or dn.jpg (or press and hold; faster) then press L/OUT to lock or unlock the ID. An L will appear to the right of the ID# if the ID is locked out. 5. Press MAN to exit programming. To Unlock IDs in a bank: 1. In Manual mode select any channel of the bank you want to view the locked out IDs in by entering the bank number and channel number (Ex: 001) then press MAN to advance to the channel. 2. Press PGM then TRUNK to put the scanner in program and trunk modes. You will see the ID list. 3. Press FUNC then L/OUT (each time) to view the locked IDs. Press L/OUT to unlock the ID. The next locked out ID will appear. 4. Press MAN to exit programming. Note: You cannot unlock all IDs at one time.

Nov 18, 2007 | Radio Shack Pro-2055 Base Scanner

Not finding what you are looking for?
Radio Shack Pro-96 Scanner Logo

Related Topics:

330 people viewed this question

Ask a Question

Usually answered in minutes!

Top Radio Shack Radio Scanners Experts

Iron
Iron

Level 3 Expert

3018 Answers

Robert McClure

Level 2 Expert

160 Answers

John
John

Level 2 Expert

473 Answers

Are you a Radio Shack Radio Scanner Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...