Question about Lexmark X7170 All-In-One Scan/Copy/Fax and Photo Printer

1 Answer

My printer will not commicate with my computer

Posted by on

  • bob collins
    bob collins May 11, 2010

    Has it worked before?

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

I had the same problem with my X5410. I had to uninstall the Lexmark software. Then I turned ON the Windows Firewall.
I then re-installed the Lexmark. Only took about 6 hours
to figure it out !!!
Good luck

Posted on Jan 18, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I connect the code reader to rav4 2005 it said error communiccation


Poss no power at OBD2 connector. Try another reader or new cable. Check pin connections

Apr 04, 2014 | 2005 Toyota RAV4

1 Answer

How to install 3G Mini Card in HP 8560w A6C86PA


those cards only work in your country.
they must match. (commications laws, RF)
no country stated by you, earth is big place and we are WWW.
the manuals cover all that. you asked, it has its own place .

the book is free to read. see the 10MB large book here,
service. bingo


https://support.hp.com/us-en/product/hp-elitebook-8560w-mobile-workstation/5071171/manuals

Sep 30, 2017 | HP Computers & Internet

1 Answer

Washer wont start


f28 is a seriel commication error between motor control and main control board

Sep 23, 2012 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Keeping getting commication not available


A quick fix for most communication errors can be achieved by resetting the printer and/or rebooting the PC. Simply disconnect the printer from your computer (if USB connected)> reboot your pc > unplug and re-plug the printer into the power source to reset it. When the printer turns on, reconnect it to your computer (if USB connected). Then try to print again once the computer fully recognizes the USB connection or when the WiFi light on the printer turns solid green (if WiFi connected.).


If that doesn't help, try the steps below:

  1. Disconnect the USB cable connecting the printer from your computer.
  2. On your computer, go to Control Panel > Printers and Faxes.
  3. Delete the Lexmark print object.
  4. Reboot computer.
  5. Re-brick your printer by pulling out the power supply - black box where the power cord is plugged into on the back of the printer, and re-plug after 30 seconds.
  6. When the printer turns on, reconnect it to the computer.
  7. Wait until your computer fully recognizes the USB connection. To check, go to Control Panel > Printers and Faxes. If you see a new Lexmark print object in the list, try to print a document to verify that the problem is fixed.

Jan 02, 2012 | Lexmark X2600 InkJet Printer

1 Answer

Please help


keep looking though the menu.
put the song on the phone again can help the stufffing about. some phones miss out on features for commical reasons?

Jun 09, 2009 | Samsung SGH-a737 Cellular Phone

2 Answers

My computer will not communicate with the internet


Try following the troubleshooting steps for overall dead connection here, and for USB connections between the PC and Modem here.

Dec 23, 2008 | HP PAVILLION DV6841TX PC Desktop

1 Answer

Whirlpoo; wfw9200 F22, F28, A17 A27 error codes


f22 is a door lock error and f28 is a commication error you still have warranty thorugh whirpool. you're going to need pro. help

Dec 13, 2008 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Printer not commicating with PC


I have the same problem. I know now that Lexmark X83 does not work if you have Windows Vista as your operating system (at least not yet...).

Aug 10, 2008 | Lexmark X83 All-In-One InkJet Printer

Not finding what you are looking for?
Lexmark X7170 All-In-One Scan/Copy/Fax and Photo Printer Logo

Related Topics:

93 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Don  Farrell
Don Farrell

Level 3 Expert

1018 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18411 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...