Question about Routers

1 Answer

Need help setting up a SPA2102 viop router - Routers

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Contacvt me I can help for a fee tekknow2001 [at) yahoo d0t com

Posted on Jan 18, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can access internet to my laptop via ethernet cable but not wifi through Cisco Linksys router model no SPA2102 as I have lost network security code... tried to find number to call for support but dont...


ok well if you lost your security code then the only way you can connect to your wireless connections again is to have the correct credentials correct Passwords .in your case you lost your Password the only options you have is to reset your router and setup new Password for your wireless . ok lets reset the wireless router now . on the back of your router their is a tiny hole says Reset use needle or a pen to press the button for 40 seconds and release turn off your wireless from the plug and turn it on again . now connect to your wireless and you will not need password to connect Internet.

if you need help with setting up password on your router then email me zana_adil86@hotmail.com

May 02, 2011 | Routers

2 Answers

Windows cannot find any networks on a HP530 Laptop, the wireless works only when manually connected


Your router is likely configured to not "Broadcast" its SSID name. You need to reconfigure the router to broadcast the SSID.

Mar 15, 2011 | Routers

1 Answer

I have router SPA2102 and i am wondering if this is also wirelles router. Thank you!


This is only a Linksys VoIP Phone Adapter with Router capability but only wired not wireless, here is the complete details about this router just click HERE.

Feb 17, 2011 | Linksys SPA2102 Router

1 Answer

Linksys SPA 2102


To reset your SPA device to the factory default values, follow the steps below:

1. Disconnect the Ethernet cable
2. Access the voice menu (****) and press 73738#.
3. Login with the username "user" when accessing to http://spa-ip-address OR
login with "admin" when accessing http://spa-ip-address/admin/.

NOTE: Resetting your unit will erase all the configuration settings. If your SPA device was provisioned by a service provider, the reset function might be password protected. Contact your service provider.

Apr 21, 2010 | Linksys SPA2102 Router

1 Answer

Have setup in this order dsl modem,dir615 router,spa2102 phone adapter,get dial tone,hear ringing when making or receiving calls but no voice,what gives??


incoming voice ports are not open on the router. the devioce uses one IP port to set up the call (ringing) and at least 2 others for audio. read the manual I'm afraid.

Nov 06, 2009 | Routers

1 Answer

LINKSYS SPA2102 VOIP DOSNT COME ON


Ok these boxes can either work or not.

So you have to confirm that your internet connection or box you are plugging into is set for DHCP. If not it will not get an ip and work.

Figure out where the linksys is plugged into which can be and you can try this -

1. plug the vonage box directly into your internet connection without your computer connected.
If it works then you need to go into the box you connected and have it set for DHCP to be ON. if not you will only get one ip for your multiple items you wish to use and only one at a time will work.

e

Mar 20, 2009 | Linksys VOIP VONAGE PHONE ADPTR 2-PORT...

1 Answer

Obtain password for locked SPA device


Hold down the reset button in the back. hold it in for 30 sec.

it will reset to default settings. there is no way to get the password.


Jan 09, 2009 | Linksys WRT54GP2A-AT Router (WRT54GP2AAT)

1 Answer

Need to add Linksys WRT54G-TM wireless router with Linksys SPA 2102 phone adapter


your SPA2102-R seems to have one ethernet connection and one internet connection.
your WRT54G-TM seems to have one internet connection and 4 ethernet connections.

What you are trying to achive is; plug a ethernet cable into the ethernet connection on your SPA2102-R then plug the other end into the internet port of the WRT54G-TM

hope this helps, I have assumed that you intend to use a DSL broadband supplier not ADSL.

if you are changing service from DSL to ADSL then your WRT54G-TM needs to be first in line configured and working. then plug the internet port from the SPA2102-R into any of the WRT54G-TM ethernet ports.

Nov 06, 2008 | Linksys Wireless-G WRT54G Router

1 Answer

Linksys SPA2102 interfearing with winmx/360 sharepro, frequently resetting connection


If your planning to connect the phone adapter behind a router make sure that the following ports are open/forwarded on the router; UDP ports 5060-5061, UDP ports 16384-32767 take note that 5060 and 5051 one are SIP ports and must be assigned to the IP address of that was assigned to by the router to the adapter or the IP that was manually configured on it.

I found a link that could help you check the setting on your linksys phone adapter

http://www.voipvoip.com/linksys-pap2/

Hope this will help you solve your VOiP problem...

Regards,

Sep 11, 2008 | Linksys VOIP VONAGE PHONE ADPTR 2-PORT...

2 Answers

Connecting westell 6100 (verison) Vonage and linksys WRT53G 2.4 and computer


try this resolution provided by me earlier. In any case if this doesnt work, you may initiate a chat with me and we can carr on from there... http://www.fixya.com/support/t139545-configure_router Good luck

Apr 21, 2007 | Linksys WRT54GP2-NA Wireless Router...

Not finding what you are looking for?
Routers Logo

Related Topics:

75 people viewed this question

Ask a Question

Usually answered in minutes!

Top Routers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Mike

Level 3 Expert

4331 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...