Question about Maytag MDE9700AYW Neptune 174 Electric Dryer

1 Answer

My dryer runs about 10 seconds and then stops

After it stops it displays "do"

Posted by on

  • hughjohnson Jan 18, 2009

    It seems that the problem may be in the selector switch but I am not certain of how to check for this. I had already checked the areas that you suggested.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 373 Answers

"DO" indicates Door Open
Door monitor switch in door lock mechanism is not able to communicate to the control board is open.Try taking the following action

1.Make door is closed.

2.Check for loose wire connections at switch and/ or machine control board.

3.Check for failed door monitor switch.

4.Check inputs and outputs at machine control board.

5.Replace responsible component.


Good luck.Please do rate my answer if liked.also please post comments for further queries.

Posted on Jan 18, 2009

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Maytag Gas Dryer MDG3000AWW


you check all the wirings maybe you have lost contact wirings!

Oct 09, 2007 | Dryers

1 Answer

Pe error on whirlpool washing machine


Check the motor brush they surely are dirt you can also clean the collector where the brushes lays on

Jan 28, 2014 | Smeg WDI12 Front Load Washer / Dryer

1 Answer

Maytag dryer MD-24 error symbol?


The dryer completes the cycle you have set. If you do not remove the contents at the end of the cycle, the dryer performs the start-stop routine you describe until you get around to removing the contents. Eventually even the start-stop routine ends and the contents just lie in a heap until removed

Mar 11, 2013 | Dryers

1 Answer

Samsung Dryer starts for 5 seconds then stops, but drying time still counts down.


I got the same problem and I tried to take off the belt let see the motor still running by itself but it still run for couple second then stop.

Jun 12, 2012 | Dryers

1 Answer

Dryer says locked


The Operating Instructions say this:

Control Lock
To avoid having someone accidentally start or stop
the washer, press OPTIONS and Select at the same
time and hold for about 10 seconds until the
(Control Lock) lights up. “LOC” will be displayed
alternately with the estimated cycle time. Turning
the Cycle Selector knob or pressing any button
will produce flashing indicator lights and/or beeping.
To unlock the controls, press and hold OPTIONS
and Select for about 10 seconds.

Oct 14, 2009 | Frigidaire GLEQ2152ES Electric Dryer

1 Answer

Cabrio Dryer runs for 5-10 Seconds and then the drum stops.


Go to: RepairClinic.com
to troubleshoot your appliance.

You'll need the make & model #.

Nov 16, 2008 | Whirlpool Cabrio 7.0 Cu. Ft. Super...

1 Answer

Kenmore 80 series dryer stoping after running for 10 to 15 minute


Start any cycle. Dryer runs for 10 to 15 minutes, then stops before cycle is complete. Start again, stops again in 10 to 15 minutes.

Nov 11, 2008 | Kenmore 63942 Dryer

3 Answers

Smeg WD1 12C, error code 10


I have a smeg wd1 12c washer dryer showing error code e01 any idea how to fix it?
Gilly

Nov 06, 2008 | Smeg WDI12 Front Load Washer / Dryer

1 Answer

Maytag Gas Dryer won't stay lit


Mostly the Booster & Holding Coil, Their part number is 3-06106

Oct 08, 2007 | Dryers

Not finding what you are looking for?
Maytag MDE9700AYW Neptune 174 Electric Dryer Logo

Related Topics:

83 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

Bill Long

Level 3 Expert

587 Answers

John Tripp
John Tripp

Level 3 Expert

4654 Answers

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...