Question about Euro-Pro 8260 Mechanical Sewing Machine

2 Answers

CONSEW 206RB5 TOP THREAD NOT FORMING STITCHES AND BREAKING

BOTTOM THREAD IS STITCHING BEAUTIFULLY. THIS IS A WALKING FOOT MACHINE. TOP THREAD WON'T STITCH AND WHEN IT DOES IT'S VERY LOOSELY, UNUNIFORMED STITCH AND THEN THE DERN THREAD BREAKS.

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 334 Answers

You have your thread tension too tight that's why it is pulling the bottom stitch all the way through it looks good from the bottom but not good on top. Its pulled the stitch all the way through the material.
I had my own upholstery shop 18 yrs and tension gets you every time.Just loosen the top tension.

Posted on Jan 18, 2009

  • Gwen Reynolds
    Gwen Reynolds Jun 18, 2014

    How do I change the thread tension?

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I'm having the same problem, the top string gets stuck in bobbin, doesn't complete stitch, then pulls down the fabric. I've tried every setting... tension even at 0.

Tech3@geek2fast.com. this problem is driving me insane.... never had this problem with a brother or a singer but this euro pro is about to go through a window! Any ideas?

Posted on Jun 26, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am using the walking foot for a quilting project that I am working on, however, the bottom stitching is just looping and can just be pulled away from the fabric.


Be sure you are using a brand new needle.

Remove the thread from the machine.

ALWAYS RAISE THE PRESSER FOOT and rethread the upper thread from the beginning. Make sure the thread path is correct.

Verify the bobbin is installed and turning the correct direction in the bobbin case and that the bobbin thread is threaded through the bobbin tension mechanism.

Set the upper tension to the midway point between high & low number--this may require some adjustment for your particular machine.

Pull the bobbin thread to the top of your sewing project before beginning to stitch.
How and Why to Bring up the Bobbin Thread

Re-test your machine on a scrap quilt sandwich (make sure the walking foot is installed correctly and that the presser foot is lowered when beginning to stitch).

Consult the owner's manual for instructions for presser foot pressure. The pressure may need to be adjusted because you are dealing with a sandwich that is thicker than regular fabric.

You may also try changing the type and size sewing machine needle you are using. Using a Top Stitch or Microtext needle will help the needle to penetrate the fabric sandwich easier. A Top Stitch needle has a larger groove to protect the thread as it pierces the fabric which helps prevent looping.

Also, verify the thread is not too small for the needle's eye.

All About Needles

https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=2&ved=0ahUKEwil1tu2mb3PAhVR6mMKHUlvB_4QFggoMAE&url=http%3A%2F%2Fwww.schmetzneedles.com%2Flearning%2Fpdf%2Fschmetz-needle-chart.pdf&usg=AFQjCNHTR52AmqwzvyCjbXmD5Ch52Va5_Q&cad=rja

Oct 02, 2016 | Sewing Machines

7 Answers

TIming Consew 210


I am not sure about this particular machine but in most machines there will be a nob on the front loose low numbers like 0 1 -2 work well on number 3. If the nob is not on the front check and see if it is on the side.

Aug 27, 2008 | Consew Sewing Machines

1 Answer

Forming stitches beautifully, but not on the fabric


Be sure to RAISE the presser foot when threading the machine so the tension disks are open to accept the thread. It also helps to grasp the thread between the thread tree and the tension disk and with the other hand grasp the thread below the tension disk and give the thread a little tug to make sure it is seated all the way in the tension disk.

Of course, make sure that the machine is threaded in the proper sequence--check the owner's manual (usually the upper looper is threaded first, then the lower looper and the lower looper thread tail is draped Over the upper looper in the last step before being pulled under the presser foot).

If the thread breaks or comes unthreaded, Best Course of Action is to remove all the threads and rethread from the beginning. Nine times out of ten, trying to rethread one thread will not work!

Also, when removing thread, it is not a good idea to clip the threads between the thread tree, raising the presser foot, and then grabbing the thread tails at the presser foot and pulling all the thread ends down. Threads should not be pulled UP through the tension disks.

....

Feb 22, 2016 | Sewing Machines

1 Answer

I have a Brother CS6000i sewin machine and I'm


Mmmm Are you using the right stitch? Like zig zag or straight stitch only with a medium stitch length? Check that and test again.

Sep 06, 2012 | Sewing Machines

1 Answer

Stitch tension problem - bobbin thread lies flat or bunches. If you increase the needle thread tension there is no improvement - even at the highest needle thread tension the bobbin thread is a mess. Any...


Good day!

please try this simple tips:

Good day!

A sewing machine operator can often help themselves when their machine does not operate properly.
Here are some simple instructions, which if properly used can save time and mechanics service calls.
TROUBLE;UPPER THREAD KEEPS BREAKING;
This could be trouble;================Do this;
1.Top tension to tight================loosen tension 1 turn
2.Machine improperly threaded=========check threading
3.Thread twisted on guide post========"
4.Thread twisted out of tension======="
5.Take up spring bent or broken=======Check action of spring
6.Thread jumped off pull off finger===Check threading
7.Needle bent or burred===============new needle
8.Bad cone of thread==================try another cone
TROUBLE;LOWER THREAD KEEPS BREAKING;
1.Bobbin tensionspring to tight=======Loosen tension slightly
2.Bobbin threaded wrong===============check threading
3.Bobbin wound to tight or uneven=====try new bobbin
4.lint or thread on bobbin case=======clean inside case
5.Lint or thread inside hook==========clean inside hook
6.Bobbin case nicked bent or burred===check/change case
TROUBLE;MACHINE STARTED SKIPPING STITCHES;
1.Needle bent or burred===============change
2.Needle set in crooked===============Check
3.Thread jumped off take up spring====check threading
4.Thread jumped off pull off finger===check threading
TROUBLE STITCHES SHOWING LOOPS;
1.Forming loops on top of cloth=======Tighten bobbin tension
======================================or loosen top tension.
2.forming loops on bottom of cloth====Tighten top tension
3.Bobbin placed in case incorrectly===remove and replace
4.Bobbin thread slipped from under====check threading of
tension===============================bobbin case
5.Lint or thread in top tension=======clean between tension discs


Thank you and good luck.

Jun 16, 2011 | Consew 7360R-1 Mechanical Sewing Machine

1 Answer

Consew 220. I just bought it. No paperwork came with it. What is the proper way to thread it? Other adjustments necessary? Suggestions? Thanks for your help!


You can find a visual guide on the proper threading of your machine at http://www.sewusa.com/Threading_Diagrams/Threading_Pages/Consew_Sewing_Machine_Threading/consew_210_220_threading_diagram.htm. What other adjustments are you thinking of? If you have loose thread on the top or bottom, you would need to adjust the tension. The best way to do that is to start by having a different color thread in the top and in the bobbin. Then this little lesson on tension works the same with any machine.
Thread your machine with the presser foot UP. The disks that control the tension (threadgoes through them) are tightened up if the foot is down. Change the machine tension with the presser foot DOWN.Because the disks won't be engaged (see above) if the foot is up, the diskswon't move. Start at the middle setting, 3. Go up to tighten, decrease toloosen. Each machine is different, even 2 different machines of the same model.The best thing to do is start at 3 and use a different color in the top andbobbin thread so you can easily see what changes to the tension do to yourstitches. Now use a straight stitch a sew 3 or so inches. Take a lookat the top and bottom of the fabric. You don't want to see any (or at least notmuch) of the other color showing from the other side. Loops on the bottom of the fabric means you need to tighten(increase) your top tension. If you're stitches on the bottom are causingpuckering, then you need to loosen you're top tension. For the most part, youreally don't want to touch your bobbin tension-leave that to a repairtechnician. The factory setting shouldn't be touched except by someone whoreally knows what they're doing. Keep sewing a few inches at a time until you have the resultsyou want. Now you're tension is where you need it!

May 29, 2011 | Consew Sewing Machines

1 Answer

I have a Consew 206RB and it feeds backwords. How can I fix this?


I have a Consew 206RB-1 , if I had This problem I would think the stitch length setting or the downward pressure of the upper walking foot is wrong.

If you set the stitch length to less than 0 it would be in reverse and feed backward.

Dec 02, 2010 | Consew 206RB

1 Answer

Bobbin tension?


Try threading the machine with the presser foot up to see if this will solve the problem.

When a sewing machine is threaded with the presser foot down, the thread cannot properly enter the tension. No tension control of the top thread and it cannot form a satisfactory stitch.

You might be able to find a manual for your machine at sewusa.com

Mar 01, 2010 | Toyota Sewing Machines

3 Answers

BOTTOM STITCH IS ALWAYS LOOSE


If the top stitch is loose, then you need to tighten the bobbin tension: if the bottom stitch is loose, tighten the top tension. Hope this helps. It could also be the size needle and thread you are using for a particular fabric. Different fabrics require different notions.

Mar 13, 2008 | Sewing Machines

2 Answers

Brother sewing machine


Sounds like the feed is your problem. Most likely you need a different foot. Check the bottom of the foot - it should be quite smooth to allow the dog feed to move the denser layers along smoothly. Hope this helps.

Feb 07, 2008 | Sewing Machines

Not finding what you are looking for?
Euro-Pro 8260 Mechanical Sewing Machine Logo

338 people viewed this question

Ask a Question

Usually answered in minutes!

Top Euro-Pro Sewing Machines Experts

Bargain Box
Bargain Box

Level 3 Expert

1388 Answers

Irene Tulloch

Level 2 Expert

449 Answers

Are you an Euro-Pro Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...