Question about Sony CASSETTE DECK Single Dual Cassette Deck

1 Answer

I have a sony shelf system with combination cd and cassette - bel

It is a model hcd-ep313 what size or model number drive belt do I need for a replacement?

Posted by on

  • Anonymous Mar 24, 2014

    Is my sony HCD-GX450 bookshelf stereo system sn 8601738 dual voltage?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 104 Answers

Sorry, we have no belt listing for your specific model, but we do likely have what you need........

If you still have the old belt intact:
> Lay it out flat on the table
> Pinch it at both ends & straighten the belt but don't stretch it.
> Measure the length & then double it and choose or we will recommend
a size about 3-5% smaller.

Old belt too far gone to measure:
> Just use a piece of string and thread it temporarily in place of where the belt goes.
> Then measure the length of the string and Email us the exact length (inches). Along with your EXACT model number.
If your belt has a round or square cross section, please give us the thickness as well. We can assist
you in choosing a belt usually 3-5% smaller than the length you measured.
....from the turntableneedles.com site

Posted on Feb 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need to buy belts


Most belts are universal. You only need to measure the diameter of the belt in mm and search Google for cassette drive belt xx mm. Generally you don't need to get the measurement spot on. A 52mm belt for example could be replaced by a 50mm or a 55mm.

Mar 20, 2014 | Sony TC-WE635 Single Cassette Deck

1 Answer

Who sells drive- belts?


They are sold at Consolidated Electronics if you know the size and type otherwise you buy a kit from Marrs Communications

Feb 28, 2014 | Sony CASSETTE DECK Single Dual Cassette...

1 Answer

Sony HCD-GT222 Hi-Fi CD and cassette deck with tuner, suddenly started to shut itself down at volumes higher than 50%, after three years of flawless operation.


It's thermal; protection is happening probably due to bad ventilation. Fuzz and dust can block air vents.These need to be vacuumed out now and then.

Jan 22, 2014 | Tape Decks

1 Answer

I am looking for drive belts for Sony Model TC-WR801ES stereo casette deck


All you need to do is measure the diameter of each belt in MM. Then put "Cassette drive belt ??mm" into Google and you should find a supplier. Belts are not generally specific to any maker. Also you don't need to be precise on the MM. If you are removing them to measure, make a note of how they fit first.

Oct 05, 2010 | Sony CASSETTE DECK Single Dual Cassette...

1 Answer

Looking for part number: Drive belt or kit for Fisher Cassette Model CR-124


good luck finding a part number for something this old. I might just measure the size (diameter) and width of the belt, and see if I couldn't get a generic replacement.

Jan 05, 2010 | Tape Decks

1 Answer

I need a drive belt for Sony tape-cd player #CFD-17


All you need to do is measure the diameter and thickness, then enter the details into google, just start with the diameter you can then elimanate the wrong size (thickness) later. IE enter: 60mm Drive Belt.

Jan 04, 2010 | Sony CASSETTE DECK Single Dual Cassette...

1 Answer

NEED THE PART NUMBER FOR SONY TC-WE435 DUEL CASSETTE PLAYER BELTS


Hi,
Flat belt part number is..
301657001.. BELT (CAPSTAN)
and square belt part number is...
302440501.. BELT (FR2)
Above said info are taken from TC-WE435 cassette player s/m.
Thanks.

Dec 25, 2009 | Sony TC WE435 Stereo Dual Cassette Deck...

1 Answer

Sony HCD-GRX40AV Cassette Player Belt Layout Diagram Required


Hi , i have just spent half of yesterday trying to replace 4 belts in a sony twin player , you wont need a manual just take the cover off and remove the white plastic cover off the cassette unit at the front , after you remove this cover all will be revealed , my opinion is get a repair person to do it for you as it is really fiddly and time consuming plus you have to buy the right belts anyway , hope this helps ..

May 24, 2009 | Tape Decks

2 Answers

I need replacement drive belts for an Onkyo


i bought some today from **** smith electronic store , i paid $7.97 for a pack of ten assorted sizes

May 18, 2009 | Tape Decks

Not finding what you are looking for?
Tape Decks Logo

Related Topics:

160 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Tape Decks Experts

 Grubhead
Grubhead

Level 3 Expert

4593 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Gyula Lacz

Level 3 Expert

482 Answers

Are you a Sony Tape Deck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...