An expert who has achieved level 3 by getting 1000 points
An expert that got 20 achievements.
An expert that got 10 achievements.
An expert that got 5 achievements.
Re: my sd card does not show its property and doesn't...
Normally when this occurs, its means the SD card is dead and u will need to replace it.
try connecting the sd card into a different computer or another external SD card reader. If it shows up . right click and click format. If it says it cant format it it means the card needs to be replaced.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
try an sd card from another source. the format function of the camera should be used to prepare the sd card for the camera before you take pics with it. this may be a format issue with nintendo. format will erase all images on card, so save them first somewhere else.
Right Click Computer, Properties, Manage, Disk Management. If it doesn't show up here the card is bad. If it shows up as Not Initialized, right click it and initialize it then right click and partition it.
Hi, i have here a photo that will show you on how to remove write protect on a micro SD. 1. You need to insert your micro SD into an adapter. 2. Unlock the micro SD through your adapter as shown below. 3. Once done, your micro SD is no longer write protected.
NOTE: The lock switch doesn't lock the micro SD into the adapter; The lock switch doesn't lock the data on the micro SD; The lock switch simply tells the "user" not to write. It just says "please, don't write me." I hope this helps.
Hi, i have here a photo that will show you on how to remove write protect on a micro SD.
1. You need to insert your micro SD into an adapter.
2. Unlock the micro SD through your adapter as shown below.
3. Once done, your micro SD is no longer write protected.
The lock switch doesn't lock the micro SD into the adapter;
The lock switch doesn't lock the data on the micro SD;
The lock switch simply tells the "user" not to write.
It just says "please, don't write me."
I hope this helps.
Is the camera compatible with SDHC? If it can only handle SD memory cards this card is not readable in the device. It will show on the camera whether it is compatible with SDHC. If it doesn't have the logo, take it as the card won't work and you'll need to get a normal SD card.
There is a theoretical maximum of 2GB for SD memory cards, SDHC start at 4GB and go up to 32GB.
Simply put, if your camera is quite old, it won't support SDHC and therefore is limited to a maximum of 2GB memory card.
If your aim is to repair a corrupted SD card so that you can use it to store files then proceed to step #2.
If your aim is to recover the files on the SD card without erasing them, proceed to step #5.
Insert the SD card into a
digital camera card slot and choose to format your card. If this doesn't
work then move on to the next step...
Place the SD card into your computers SD card slot.
Right click on the SD card drive letter IF it appears and choose to "format."
If this doesn't work, proceed to the next step...
4:You will need to go to the website
Here you will download, install, and run the program to format your SD
card. This is the most advanced step of the three, but most likely to
work 99% of the time.
If you want to recover files ON your SD without erasing them, then you need to download and run the software on this site.
This is the best free software available for this type of problem.
Make sure the little white switch on the side isn't set to write protect the SD card. Try and format the SD card, it will erase whatever is on the card. To do this right click the SD card removable disk under my computer, then click format. I would make sure you select FAT16 in the options there. Then try to copy files to the card again. If it still doesn't work, try using the SD card in another machine.
If the card works in another machine, we know the SD card is good. If it doesn't work, you might have a bad card.
If the card works in another machine, try another SD card in your laptop, to make sure the laptop connector for your card is not bad.