Question about Mitsubishi Mr. Slim MXZ30TN Air Conditioner

3 Answers

MR.Slim heater - NO HEAT??

My mr. slim seems to be working fine, other then the fact that i am not getting any hot air. Can someone help me with this? I turn it on and it blows out mild air. I cleaned out the filters but unfortunatly it didnt do anything. I need HEAT. Please help.

Posted by on

  • luke bussenschutt May 11, 2010

    Does it work Ok on cooling?

  • JOHN LYONS
    JOHN LYONS Nov 27, 2013

    yes on cooling - fuolll of freon - filters clean - fans working etc. yet in cold weather I get only mild air.

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 19 Answers

Make sure you have freon in your system. they act as a heat pump which does A/c as well s heat. without freon you want have cooling or heat.

Posted on Apr 23, 2009

  • cardcoin Jan 14, 2011

    is the green light flashing--indicates error code

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I was told by one AC man to replace the board in the compressor. ?????

Posted on Nov 27, 2013

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have the same problem.3 units in my house. 2 work fine, but the3rd squeaks when it comes on sometimes... blows out mildly warm air in cycles.

Posted on Nov 02, 2013

  • Rick
    Rick Nov 02, 2013

    I have the same problem.3 units in my house. 2 work fine, but the3rd squeaks when it comes on sometimes... blows out mildly warm air in cycles.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a older Carrier heat pump, model 38YKC060. Does anyone know how cold it will continue to work at?


Heat pumps are of little or no value at temps around 40 degrees or below. And if you use the strips it will cost a small fortune if you have relatively high electric rates as most folks do.

Jan 04, 2017 | Heating & Cooling

2 Answers

My thermostat is set on 68 degrees and it shows room temperature is 68, but the furnace still kickson, Honeywell said it has a 1 degree difference. so what's the problem then?


Yes there is a one degree tolerance, in fact my heater just kicked on and it is set to 67 and the inside temperature reads 67. It is also a Honeywell.

Dec 28, 2016 | Heating & Cooling

1 Answer

How do I fix my electric heater


  • sounds like the sensor or bulb that tells it to start the blower is defective/ im not familiar with your unit but this seems the most logical answer most furnace will not turn the blower on right away usually 90 seconds after the ignition but will also run longer to exhume any dangerous carbon monoxide. Electricic heaters are different. What type of unit do you have

Dec 25, 2014 | Heating & Cooling

1 Answer

Repair infrared space heater


It might have a fuse that has been blown internally. This may have happened to protect it from over heating because it was left on too long or something went bad and it got too hot.

Dec 08, 2014 | Heating & Cooling

1 Answer

Electric Furnace stopped running


You have one of two problems. Either the capacitor for the motor has failed or the motor has failed. I would turn off the power to the unit and see if you can locate the capacitor and remove it. An ac supply or electrical supply house can match up the capacitor. This is relatively inexpensive. Otherwise you will need a new motor.

Nov 11, 2014 | Heating & Cooling

1 Answer

My termost set to a/c, the fan auto, blow very well, but when I switch to heat and the fan auto, doesn't work, but if I put fan on work why?


the thermostat says to call for heat buildup in the work if its not cold enough the thermostat won't call for heat and I won't go on but when it gets cold and the thermostat set to the temperature you want or hire someone that doesn't cycle

Oct 12, 2014 | Heating & Cooling

1 Answer

Household steamer not heating at all


Well, first thing, just hook up service water and turn it on so the water heats up. Leave it long enough for water to get hot. If water doesn't get hot like should, then heating unit is malfunctioning. If it is getting hot after a while, you pull the handle trigger and water comes out, you have to wait long enough for the hot water to get to the head/trigger for it to go into the nozzles. If it was working ok before, and you were waiting for the water to heat, then then it should be working fine. Tell me what is happening if you wait for water to heat and get to the nozzles. I'm right here at my computer and we can get this thing going if the heater unit is good. Regards, Rigger.

Oct 07, 2014 | Heating & Cooling

1 Answer

Heat will not blow hot air model #310aavo48090oabjd serial #0205a42429


give name make of unit and set up of system oil/gas ect...

Oct 28, 2012 | Heating & Cooling

Not finding what you are looking for?
Mitsubishi Mr. Slim MXZ30TN Air Conditioner Logo

3,360 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Heating & Cooling Experts

andrew petersimes

Level 2 Expert

248 Answers

ray gallant

Level 3 Expert

39668 Answers

Michael Youngman
Michael Youngman

Level 2 Expert

156 Answers

Are you a Mitsubishi Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...