Question about Projection Televisions

1 Answer

Lost instructions to go video sima corp. product id#CT-200

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Thanks for reading the post, althought, the problem was for information (sima/go-video) is a piece of hardware attached to the tv/dvd player/dvr satelite/dvd-r/ via a switched box. the instructions for the use of the sima -go-video. the problem was solved. it was a dirty connector. lost audio signal. for 2 days ran the lines and re check all, to no avail. did a split screen ocr on the panasonic viva HD TV system. finally i was told on a yearly basis, to unplug and replug all connections several times to clean the jacks via connectors. connectors are fib-optic and gold plated connectors into a 10 port switched box. the major problem is with the tv, it has geo-metric screen in which has to turned off prior to movement, get the magnets to re-do and balance the screen. and re set and locked in all settings. the tv is approx. 250lbs system on a custom build stand w/comm wheels. its a pain. i know WHAT your thinking lost of power/or black out. battery back-up system attached. thanks again for responding. gina

Posted on Jan 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I reset Sony Wega KDF-60XS955


SELECTED PRODUCT: KDF60XS955 (change your search)
How to reset the television to the original factory settings.
Article ID: 42994 ' Last Updated: 08/15/2015
WARNING: FOR LCD AND PLASMA TELEVISIONS: This procedure will reset the video calibration settings of the TV. If you paid to have your TV screen specially calibrated, you may want to first try performing a power reset instead. Otherwise, any special calibration settings will be lost.
A Video Tutorial is available with information about this topic.IMPORTANT:
  • The supplied remote control is necessary to perform this procedure. Then be sure to point the remote control towards the front and center of the television.
  • If lights on the front of the TV are blinking or flashing, follow the steps in this answer.
  1. Unplug the TV power cord from the electrical outlet.
  2. Allow the TV to remain without power for one minute.
  3. Plug the power cord back into the electrical outlet.NOTE: The TV should turn on automatically. If it does not, turn it on.
  4. Wait approximately 40 seconds for the TV to completely start up.
  5. On the TV remote control, press and hold the UP ARROW button.
  6. While holding the UP ARROW button, press and release the POWER button on the TV set. NOTES:
    • The TV may turn off and then back on.
    • The button may be on the front, top or side of the TV. If your TV has an Energy Saving switch, be sure to press the POWER button rather than the Energy Saving switch.
  7. Release the UP ARROW button.NOTE: The initial setup screen displays if the above procedures were performed correctly.
  8. Follow the on-screen instructions to complete the initial setup.
IMPORTANT: If the reset did not complete successfully, disconnect all devices from the TV and turn off or disable the network connection the repeat these steps.

Sep 24, 2015 | Sony Projection Televisions

1 Answer

Need illustration instructions for the harrier II plus 1:48 scale kit


This is posted in wrong area---try to Google for that corp and kit to see if instructions can be found.

May 27, 2012 | Projection Televisions

1 Answer

Have dell model#w3706mc lcd tv manufactured by phillips. lost sound all ch.need help,schmatic,parts,book.etc


the manual link for your tv is given below for all the installation and basic troubleshooting instructions:

http://www.retrevo.com/support/Dell-W3706MC-TVs-manual/id/280bh049/t/2/

for parts: you can buy from:--
www.partstore.com

This will help. Thanks please keep updated.please do rate the solution positively .thank you for using fixya.

Nov 17, 2009 | Projection Televisions

1 Answer

NEED HELP LOCATING INSTRUCTION MANUAL FOR T.V.


ct841 is the model of the remote. The model of the TV will most likely be on the back. Once you have the TV model, -->click here<--, this is the site to download the info you seek.

please take the time to give this solution a fix ya rating.

clarkco

Apr 11, 2009 | Toshiba 42H81 42" Rear Projection...

4 Answers

How to fix fuzzy pic & red,blue,green lines on your screen?


Typically this is due to a convergence chip failure. This repair can be done pretty easy with the proper instruction. Have a look at this video to help determine if you truly have a convergence problem.

Jan 26, 2009 | Toshiba 57H82 57" Rear Projection...

1 Answer

I need to get a manual for a magnavox vhs/dvd recorder item #zv450mw8


Hey jleedwards,

If you have lost your owner's manual for this Magnavox VHS/DVD recorder, you should be able to find a copy of it online through the Magnavox/Funai support website:

http://www.funai-corp.com/6pdf/om/ZV450MW8.pdf

Hope this helps you out.

Sincerely,
Aaron
Go Ahead. Use Us.

Jun 16, 2008 | Projection Televisions

1 Answer

51f59a hitachi projection color televison


Philips has a projection cleaner. I wouldn't use adbrasives like alcohol or windex. try www.vancebaldwin.com or MCM electronics corps

Apr 04, 2008 | Hitachi 51F500 51" Rear Projection...

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

278 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

61249 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...