Question about Acer Aspire 3610 Notebook

1 Answer

Argh girlfriend spilled hair gel on my laptop

Taken apart/cleaned/put back together.....(the best i could)

when booted up. screen shows the following :

Intel UNDI, PXE-2.0 (Build 082)
Copyright (c) 1997-2000 Intel Corporation

For Realtek RTL 8139(x)/8130/810x PCI Fast Ethernet Controler v2.13(020326)

PXE-E61: Media Test Failiure, Check Cable
PXE-M0F:Exiting PXE Rom.
Operating system not found


Posted by on

  • mr_schepers
    mr_schepers Jul 06, 2013

    I have exactly the same problem with my acer aspire 3610. I already tried the alt + ctrl +delete-thing , but it remains the same.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Acer Master
  • 1,102 Answers

Thats ethernet card realtek
did you check to see hard drive is securely in tack
saying can't find os
you may need to do a new install let me know
if you took apart you made have caused hard drive to become lose

Posted on Jan 17, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have taken my acer aspire apart to clean the fan,, when I put it bk together the screen does not come on,,any idea on what to do ?


Can you be more spacific? Did you pull it fully apart eg, the whole case. If so make sure the ribbon or conectors are connected back to the board, even the slightests bit off can cause it to not work.

Jan 27, 2015 | Acer Aspire Computers & Internet

Tip

Recover from a Coffee or Soda Spill Disaster


You know that feeling you get when you spill that cup of coffee into your brand new laptop or new keyboard. It is definitely something you don't want to go through. With this thought in mind I have put together a simple emergency disaster plan for dealing with beverage soiled electronics.

Be quick and act fast.
It must really betray one's feelings to just have spilt that sticky cup of coffee or soda onto your expensive laptop. You can virtually see your money getting soaked, but there's no time to waste, every second wasted is a second that whatever you spilled gets to dry and become sticky; the sort of stickiness that leads to a corrosive short-circuiting catastrophe.
Turn the machine off immediately and disconnect it from any main AC or wall socket. If it's a laptop remove the battery pack, if its a keyboard unplug it from your PC. If the liquid creates a short-circuit whilst there's electricity running through it then the chances of a fiery smoke burning disaster will me immanent. Disconnecting and switching off immediately improves the chances of saving your piece of technology.

Evaluate the extent of the spill
Now that you've unplugged and disconnected the device take a brief few seconds to assess the extent of the spill. Was it just a few drops spilt on a keyboard the kind of spill that can easily be cleaned by removing the keys around the spilled area? You may need to use an alcohol solution to break down sticky areas. Don't be afraid to give the removed keys a good rinse down to make sure they're clean and to make them look good as new; as long as you dry them off properly before re-inserting them. Make sure you remove as much wetness as this will start to make your keys stick when it dries.
slasher_x_62.jpg

Take it apart if necessary
Don't have a break down when you come to the realization that the spill has gone further than the surface. If you aren't seasoned in the arts of taking apart electronics and putting them back together again (with all screws in place) then maybe you should get some assistance on the matter, find a local PC store and ask a technician to take a look. Taking apart your expensive gadget is a chance you may have to take to isolate and remove the spill before it causes permanent damage. You will most likely need a screwdriver or many of them as there can be all sorts of shapes and sizes when it comes to electronic parts; star, flat, weird star shapes etc of all sizes. Just follow these few guide rules when dismantling the gadget as you go:

1) You may need to use a bit of force when removing plastic clip plates or circuit boards, but beware. If the component seems to be taking more stress than it can handle then there may be hidden screws nearby.
2) If you're taking something particularly complicated apart why not take a few snap shots with your digital camera as you go along.
3) Draw some sort of mental map as to which screws go where, you can even draw a literal map if you want to. Don't just put all your screws into one big pile and expect to know where each one goes afterwards, I'm sure you'll come across may different sizes and shapes in the one device alone.
4) What your focus should be is to find any circuit boards that may have been exposed to the spill. If its a heavy spill on a keyboard then you'll need to find the main circuit board that runs underneath the keys. If it's a laptop on the other hand then you'll need to remove the effected boards including the motherboard and smaller circuit boards near the spill. This is where I ultimately suggest clear documentation of everything you remove, their places, screws and orientation etc.

Give it a good 'ol rinse down
Once you have removed the circuit board or boards that may have been affected by the spill, you'll need to clean off the stain. If the spill is rather small then you can use alcohol swabs to clean it off. If the whole circuit board is drenched, you'll need to resort to extreme measures. And by this I mean completely disconnect it from the rest of the device and run it under soapy water. Now I know what's running through your head, running electronics...under water...that's madness!!! Thinking this is fair game, water and electronics are in most circumstances a bad combination, but sometimes you have to be brutal to save the things you love. I can't stress this enough: MAKE SURE THE CIRCUIT BOARD IS DISCONNECTED FROM THE POWER!!! If you see smoke and fire and have yourself a hair raising experience because you failed to remove the power cord or disconnect it entirely from any power source then you've been warned. LIVE ELECTRONICS MIXED WITH WATER IS EXTREMELY DANGEROUS!!! So long as the circuit board has no power running through it, it is completely harmless. With the warnings out of the way and what not let's get back to the rinse down. Don't scrub the part down hard, be gentle, let the soapy water dissolve the problem away. When you've removed the stain and any chance of stickiness, rinse off the soapy suds. For the best chance of revival I suggest using distilled or deionized water, you should be able to find it at most retail supermarkets. This water has less iron in it than regular water just in case you miss a spot wile drying at least it wont rust out the component from the inside. If you don't have distilled or deionized water on hand, regular water should be fine however it may leave tiny deposits as it dries.

Dry it up good
I suggest you air dry the component as a towel or cloth can leave behind lint. Use a hair dryer at a low setting from a distance so you don't overheat any components or warp the circuit board. If you want to speed up the process then you can pack the wet parts in a siccative, such as silica gel (that gel pack you sometimes find in shoes or product that are to be kept dry) or plain old white rice from the kitchen will do the trick.

Once all the components are clean and dry, it's time to put everything back together with the help of your trusty mental map or camera shots. Make sure everything fits together securely.

This method won't guarantee that your gadget will be working again, but at least there's a chance. My team has saved a laptop from a coffee spill using this method and that was way after sticky crystallization had taken place. All I can say is good luck and happy cleaning.

on Mar 15, 2011 | Computers & Internet

1 Answer

Locked out of my dell 1764


If you want to keep your OS and data safe then they best way to fix this issue by taking the motherboard backup battery out and put it back using following steps:
You need to open the lower black panel apart for this you can follow the online YouTube tutorials. Once panel is taken apart then you will see a small battery cell connected with 2 red and black wires via jack. Take this jack off to disconnect the battery for about 10 mins then put it back and try turn

Sep 24, 2013 | Dell Inspiron 1764 Laptop

1 Answer

Why does my aspire laptop loose data while writing in word. and other sites


sounds like there's something messed up with your delete key, pop the key off and double check for debris, and make sure the rubber boot isn't worn and stuck down. if it's stuck popped in just pop it out and try again, if it's worn you'll need a new boot. be careful you don't pull the scissors apart when you pop it off. if you do it can become a pain in the **** to put back together. you can also get a qtip and some alcohol and clean the contact before putting it back together. good luck

Feb 27, 2012 | Acer Aspire 7741z

1 Answer

Laptop keyboard doesnt work, extensa 5220 laptop . keyboard keys do nothing,boots up fine , and mouse functions fine, can get on facebook , but cant type anything.


Either something got spilled in it or the connection ribbon got jossled lose. The top power bezel should be in with clip snaps. Remove it then the keyboard should pop up after you lightly squeeze the sides in. Look under the keyboard there is a ribbon that connects with a lock snap. Lightly push the lock clip up and push the ribbon back in and snap the clip back on. Do not put it all together yet try booting it apart and try the keyboard. If it still doesnt work power down remove battery unplug it and finish removing the keyboard order u a new 1. They run around $20 brand new.

Mar 28, 2010 | Acer Computers & Internet

1 Answer

HP Pavilion ze2308wm won't boot up


Have you tried an external keyboard, either PS2 or USB depending on what ports are available?

Mar 14, 2010 | HP Pavilion ze2000 Notebook

1 Answer

Webcam Help After Spill


Hi,

Taken it back to your repairing shop, ask for brushing of the motherboard with CTC, and also proper cleaning of Cam and Sound points. Hope so this will work.

Best of LUCK!

Regards;
Hassan

Jul 07, 2009 | Toshiba Satellite M65-S821 Notebook

1 Answer

I need to replace the keyboard.


You ma by able to take the PC apart yourself.I believe most are put together the same way.I am not sure tho.I would start by taking out all the screws from the bottom and then place them in order next to the PC so you can put them back where they go again.I have recently just taken a laptop apart for the first time and it wasn't that hard.Just had to take out allot of screws and remember where they went back in.Once you have the laptop apart you'll see where everything is connected.Just take your time and you'll be fine.Where the keyboard connects to the board is a little tricky.On mine there is a clip that locks.It's long and kind of flat and I couldn't figure out how to lock it or unlock it but I did eventually.

Jun 01, 2009 | Gateway 7510GX Notebook

2 Answers

Coke spilled on to the keyboard for my laptop, but i still can turn it on and the mouse will work but the keyboard won't, i took off the keyboard to dry under it and put it back together but keyboard still...


Take it to the closest computer repair shop... And have them clean your laptop... Maybe the coke short circuited something on the board, and now it doesn't work ...

Mar 18, 2009 | Acer TravelMate 270XV Notebook

1 Answer

No display after taken apart. HELP!


take it appart againg and check all connectins are secured it sounds like the screen plug is disconnected

chris

Oct 29, 2007 | Intel S6240 Notebook

Not finding what you are looking for?
Acer Aspire 3610 Notebook Logo

178 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acer Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18330 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Are you an Acer Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...