Question about Eureka 431A Optima Bagless Upright Vacuum

1 Answer

Reset button for Eureka 431 bagless upright???Where is it?!

I can't find the button for the roll brush reset! I have taken apart the vacuum and everything works fine except the roll brush wont turn. The button is not located on the outside like the owners manual states for the 430 series is the button hidden somewhere and I just haven't found it yet?! Please help!!!!

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

If the red light is one the says "check brushroll" then you have to take it apart to find out what the problem is. It might be that the roll has too much stuff rapped around it so you have to take it out and clean. It could also be the rubber belt is not properly in place. Once you take the bottom off the belt should go on the far right side. Those are the only things i can think of. I have had mine for 3 years and have never seen a reset switch. Usually when my light comes on it is because there is a lot of hair rapped around my brush roll.

Posted on Jan 22, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The power head won't turn


In the upright position with the power off, press the reset button on the left side of the power head.

May 16, 2010 | Eureka 5849A Boss Bagless Upright Cyclonic...

2 Answers

My boss model 5892 brush will not roll


This unit has a reset button on the side of the hood. Recline handle, turn power switch on, pressing down in carpet mode, press reset buttonon the side of the hood, the brush should turn on.

May 01, 2010 | Eureka 5856BVZ Boss Bagless Upright...

1 Answer

Eureka boss 5893A brush roll does not work


you have to prss the pedal and lean it back the brush roll wil enguage

Jan 11, 2009 | Eureka Altima Upright Vacuum Model 2996AVS...

1 Answer

Brush spins & then trips & quits


Sounds like a clog to me. Check that the roller brush cap fittings (caps at either end of the brush roll) don't have thread in them as well as checking that the dust channel from the sole plate is completely clear.

Dec 16, 2008 | Eureka 5892AVZ Bagless Upright Cyclonic...

1 Answer

Eureka 2981bvz bagless belt pully is getting too hot and burning through belt


Check the brush roll, if one end has overheated and is locked up so it won't turn, then you need to replace the brush roll.

Jun 04, 2008 | Eureka 2971AV EZ Kleen Bagless Upright...

1 Answer

Vacuum doesn't go into carpet mode


If the model number is 5892AVZ, either the brush roll is bad or the brush roll motor isn't coming on to drive the brush roll. There is a circuit breaker, make sure it didn't trip, reset it if it has.

Jan 31, 2008 | Eureka 5892AVZ Bagless Upright Cyclonic...

1 Answer

Eureka optima 431A


Belt number is 74376, there should be screws on the bottom, take those out and the top comes off, or the top and bottom come apart. You will want to clean evrything so the brush roll will roll easily.

Dec 18, 2007 | Eureka 431A Optima Bagless Upright Vacuum

3 Answers

Belt


Turn vac over, take out 4 to 5 screws and the top cover will come off. The belt is a cogged belt #72393 and goes between the brush roll motor and the brush roll.

Nov 14, 2007 | Eureka 5892AVZ Bagless Upright Cyclonic...

1 Answer

Eureka 5849A Boss bagless upright


remove belt to brush roll and see if noise persists. if it stops, you probably need a brush roll. at least doing this will narrow down the fault area

Mar 26, 2007 | Eureka 5849A Boss Bagless Upright Cyclonic...

Not finding what you are looking for?
Eureka 431A Optima Bagless Upright Vacuum Logo

Related Topics:

1,645 people viewed this question

Ask a Question

Usually answered in minutes!

Top Eureka Vacuums Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

Jim Parker
Jim Parker

Level 3 Expert

1040 Answers

Roger Potts

Level 3 Expert

694 Answers

Are you an Eureka Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...