Our capresso C1000 quit during the cleaning process. Cannot manually move anything because all parts must be in place for it to complete. What could be the problem?
My C1000 also quit in the middle of the cleaning process. Now I cannot reinsert the tray.My C1000 also quit in the middle of the cleaning process. Now I cannot reinsert the tray.
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Ihave the same problem , plus a hole in the heater , spoke to capresso rep they do not sell me any internal parts ,I would have to send ithe machine to them pay $280.00 before Shipping they will fix it or pay the difference to an ubgrade.
let me know please if youu find a solution
thanks
No, first push the self clean button (hold until lights come on). Then pull the grounds unit and empty it, that will turn off one red light. Fill the water tank. Then drop the tablet. Then hit the ground coffee button. Cycle through and dump the grounds each time the grounds light illuminates.
I own a Jura Capresso S8 espresso machine which has been wonderful except for the pump that makes the froth. I sent it back to be repaired once already, at the tune of $250.00. Now it seems to have gone again, and this time it will cost me $275.00 to have it repaired. Anything I can do myself?
This is an old question but I have the answer. I called Capresso Customer service. I told her what I was doing and she walked me through it. When it came to holding down the button for three seconds, I said I didn't get green lights but 4 solid red lights. She informed me the manual booklet was wrong and asked me where I got it. I said it came with the machine AND I looked it up online and downloaded a PDF of the manual just to double check. She informed me "Well, you are where you need to be now, so proceed with the decalcification". You think Capresso would put up or send out a notice to owners. They have my info and they have "refurbished" the machine once before. Weird.
My C1000 also quit in the middle of the cleaning process. Now I cannot reinsert the tray.
×