Question about NetGear WGR614 Wireless Router

1 Answer

Cannot access internet with wireless router connected

I have dsl internet and im trying to connect a netgaer wgr614 wireless router to use on second computer ive used to set up wizard and every thing shows its connected but i cannot access internet

Posted by on

  • 2 more comments 
  • Anonymous Jan 19, 2009

    how do you hook up roter

  • gbaz2222 Jan 20, 2009

    hi.. i`ve connected up router and modem to my home computer and they are working fine, but my laptop keeps saying no service , then local access, local and internet access, so far gone 1 full day with no interruptions, basically getting intermittent connection, help


  • Anonymous Jan 23, 2009

    can not get to the internet through my wireless router

  • toberapt Apr 21, 2009

    conneting netgear WGR614 v7 g router to speedstream ethernet adsl modem with AT&T isp. (PPOE) Cannot connected to the internet. If i disconnect the netgear router I have no trouble
    connecting to the internet on the desktop. Connections are correct.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Powercycle the belkin router and modem and computer..

Posted on Jan 18, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I was thinking about buying this but i was thinking if i have this would i still need an internet at my house or would this work even if i dont have own internet at home?


You definately need to have internet connection. Wi-fi Router can only provide you the facility to access internet wirelessly within its range. In order to do so, you have to connect the router to your DSL modem.

Hope it Helps!
CreativeTECH

Nov 25, 2010 | NetGear WGR614 Wireless Router

1 Answer

Laptop shows wireless signal is available. DSL cable, all lights burn green on the router. Can access google, when I try to access a web address, the page will not load


in explorer > < tools > < internet options> <delete> all your temparary internet files.
now try accessing google.

On the router the only lights should be blinking are the connected ports Wan to the WWW the conneccted Lan ports to the intranet.
Powercycle the router and the reset button on the back.

Try a direct wire and see if the access to the net works.

Reconfigure the WIFI of the router by the instruction book

Aug 26, 2010 | NetGear WGR614 Wireless Router

1 Answer

When i hookup my netgear wgr614 iget on connectivity. If i run modem direct to computer connect fine how to fix was working fine till last night


Hi,

It seems that router need to reconfigure and once you reconfigure router i am sure you would be able to resolved issue.
Please follow steps to reconfigure router
1. Please remove all the connections from the router. Connect power to the router and then connect a cable from the computer into any of the 4 lan ports on the router. Make sure the modem should not be connected to the router or to the computer.
2. Open up the Internet Browser (Safari, Internet Explorer, Mozilla Firefox, Opera, etc.).
3. Put http://www.routerlogin.com/basicsetting.htm in address bar.
4. On the basic setting page scroll to the bottom and click on Apply.
5. Login to the router with the Username as "admin" and Password as "password" (please note that the Username and Password are case sensitive).
6. Click on lan ip setup under advanced.
7. Change the lan ip to 192.168.10.1 and under use router as a dhcp server change the starting ip as 192.168.10.2 and ending ip as 192.168.10.51, click apply and click ok for any popup message that arise.
8. Once the browser display some error message like CANNOT FIND SERVER, ACTION CANCELLED etc, Connect the dsl modem on the wan port of the router and restart the computer.
9. Power off the dsl modem and the router after making the connections.
10. Power on the dsl modem and wait till the dsl light comes on, then power on the router.
11. Open a web browser (Internet Explorer, Mozilla Firefox or Safari).
12. Access the router (http://192.168.10.1).
13. Login to the router (Username = admin Password = Password).
14. Click on Setup Wizard and then select "Yes" and Click "Next" on the detection window.
15. It should give you a "Dynamic IP Detected" or "pppoe detected"(type the Username & Password of your dsl account in case of pppoe detection) and then click next.
16. Click Apply.
17. Logout of the router.
18. Open up another browser window and try to access internet.


Thanks for using Fixya

May 13, 2010 | NetGear WGR614 Wireless Router

2 Answers

I am trying to configure my netgear router to work with my dsl motorola modem


You can access your wireless router by first running you ethernet cable from pc to wireless, then in address bar, type 192.168.1.1 and this will enter the wireless router's software. If it asks for username and password, try typing admin for both.

Sep 03, 2009 | NetGear WGR614 Wireless Router

1 Answer

Bright house modem and desktop computer, trying to hook up wireless net gear router for 2nd desktop to get internet? How do I configure the cables?


Connect the lan cable from the dsl modem into the first port on your netgear router ..
make sure your dsl modem is on PPPoE mode so that it autoconnects..
Now just connect to your wireless router via your pc interface..
*Do add a network key to your wireless network to avoid unwanted access

Jan 19, 2009 | NetGear WGR614 Wireless Router

1 Answer

Can't access configuration for Wgr614 v5 Netgear Wireless router


Since you cannot ping the router, first thing to do here is to reset the router by pressing the reset button of the router for 30 seconds while power is On and then after the reset power off the router for 5 seconds and then when the router is already power On try to ping the IP of the router using a computer that is wired to it if still cannot be ping better contact Netgear support if the router is still underw arranty and have it replace...

Dec 22, 2008 | NetGear WGR614 Wireless Router

1 Answer

Router Suddenly stopped working...?


try power cycling your network (turn off all of the hardware)
First turn off the computer,
second, the router;
lastly the router (wgr614).

Now, turn the hardware in this order:
  1. Turn on Modem. Wait 2 minutes.
  2. Turn on Router (wgr614). wait 1 minute.
  3. Now turn on the Computer(s).
this should refresh your internet connection. If not, check your routers settings for any wrong info.
to access your router's homepage, type this (http://www.routerlogin.net) into Internet Explorer.

Aug 11, 2008 | NetGear WGR614 Wireless Router

2 Answers

Solution 1 didn't work


Your Verizon DSL modem might be set to BRIDGE MODE. Try connecting the router again. Connect your pc to your router. Access the configuration page of the router. Set the INTERNET CONNECTION TYPE to PPPOe. You need to enter on that page the USERNAME and PASSWORD for your VERIZON DSL. Hope this helps.


Good Day

Mar 12, 2008 | NetGear WGR614 Wireless Router

1 Answer

Netgear Wireless Router WGR614v6


so chitodel click on start button
then CONTROL PANEL>NETWORK CONNECTIONS> right click WIRLESS CONNECTION>PROPERTIES>in GENERAL tab click on INTERNET PROTOCOL>PROPERTIES and then click OBTAIN AN IP ADDRESS & OBTAIN DNS SERVER ADDRESS AT LAST CLICK O.K. this will help u try it now..........................
GOOD LUCK.

Feb 06, 2008 | NetGear WGR614 Wireless Router

Not finding what you are looking for?
NetGear WGR614 Wireless Router Logo

Related Topics:

293 people viewed this question

Ask a Question

Usually answered in minutes!

Top NetGear Routers Experts

Barry37

Level 1 Expert

31 Answers

MrNutsy

Level 1 Expert

36 Answers

Phillip Whisenant
Phillip Whisenant

Level 2 Expert

120 Answers

Are you a NetGear Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...